[Wed Jul 11 05:28:34 2012] Detection parameters:
  Position = (402.2, 347.9) = 12 41 36.26 33 19 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 325.8 +/- 23.7
  Background counts = 40.6
  Rate = 0.007 +/- 0.0005

[Wed Jul 11 05:28:35 2012] Off-axis axis estimate = 8.33'
[Wed Jul 11 08:57:56 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 08:57:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 08:57:56 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Wed Jul 11 08:57:56 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.812
[Wed Jul 11 08:57:56 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.59"
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 11 09:42:43 2012] Fit fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 11 09:42:43 2012] Fit fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 11 12:29:10 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.864867 pixels away
[Wed Jul 11 12:29:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:10 2012] Assessing source extent using major
[Wed Jul 11 12:29:10 2012] Source does appear to be extended
[Wed Jul 11 12:29:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:06:53 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:06:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 17:06:53 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Wed Jul 11 17:06:53 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.812
[Wed Jul 11 17:06:53 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.59"
[Wed Jul 11 17:37:37 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jul 11 17:37:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src2.csv
[Wed Jul 11 17:37:37 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jul 11 17:37:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src2.csv
[Wed Jul 11 17:37:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:37:38 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jul 11 17:37:38 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jul 11 17:37:38 2012] Fit fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jul 11 19:50:16 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.864867 pixels away
[Wed Jul 11 19:50:17 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:17 2012] Assessing source extent using major
[Wed Jul 11 19:50:17 2012] Source does appear to be extended
[Wed Jul 11 19:50:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 02:38:07 2012] XMMSAS src. selection expression = ellipse(34941.265564, 30215.847076, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 02:38:07 2012] Writing source region out to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src2_src.reg
[Thu Jul 12 02:38:07 2012] Extracting stamp from image fullrun_mos1_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (365, 310) - (440, 385)
[Thu Jul 12 02:38:07 2012] XMMSAS bgd. selection expression = annulus(34941.265564, 30215.847076, 1087.500000, 2175.000000, X, Y) && !ellipse(37636.581520, 29250.263400, 802.424023, 363.494410, 76.399485, X, Y)
[Thu Jul 12 02:38:07 2012] Writing fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src2.gif
[Thu Jul 12 02:40:08 2012] Mean detx,y = (-1384.72, 8636.39) 
[Thu Jul 12 02:40:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 02:40:39 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 02:40:39 2012] Setting source spectrum file to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 12 02:40:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jul 12 02:57:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 02:57:05 2012] rmf not generated due to insufficient counts
[Thu Jul 12 04:36:03 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:36:03 2012] Error reading totcts from fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 12 04:36:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:03 2012] Using photon index=1.80, rate=0.00668, arf fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src2.arf
[Thu Jul 12 04:36:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:03 2012] Updating source flux to 9.5e-14
[Thu Jul 12 04:36:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting