[Tue May  7 00:49:38 2013] Detection parameters:
  Position = (298.2, 270.2) = 2 15 47.06 -73 50 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.2 +/- 19.6
  Background counts = 37.7
  Rate = 0.007 +/- 0.0006

[Tue May  7 00:49:38 2013] Off-axis axis estimate = 2.05'
[Tue May  7 02:10:29 2013] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue May  7 02:10:29 2013] Initial guess for spatial extent in simple fitting = 7.45"
[Tue May  7 02:10:29 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.766
[Tue May  7 02:10:29 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.45"
[Tue May  7 02:45:40 2013] fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_src4.ximg exists
[Tue May  7 02:45:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_src4.csv
[Tue May  7 02:45:40 2013] fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue May  7 02:45:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_src4.csv
[Tue May  7 02:45:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 02:45:40 2013] fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue May  7 02:45:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May  7 02:45:40 2013] fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue May  7 02:45:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May  7 02:45:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202130101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 02:45:54 2013] Spatial fit model total counts = 624.550000, observed total counts = 444.000000
[Tue May  7 02:45:54 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 02:45:54 2013] Vigneting correction estimate = 1.000000
[Tue May  7 02:45:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 02:45:54 2013] Assessing source extent using major
[Tue May  7 02:45:54 2013] Source does appear to be extended
[Tue May  7 02:45:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 03:56:35 2013] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue May  7 03:56:35 2013] Initial guess for spatial extent in simple fitting = 7.45"
[Tue May  7 03:56:35 2013] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.766
[Tue May  7 03:56:35 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.45"
[Tue May  7 04:26:01 2013] fullrun_mos2_xmm0202130101_pi300-10000_cl_pass1_src4.ximg exists
[Tue May  7 04:26:01 2013] fullrun_mos2_xmm0202130101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue May  7 04:26:01 2013] Fit fullrun_mos2_xmm0202130101_pi300-10000_cl_pass1_src4 appears to have run properly
[Tue May  7 04:26:01 2013] fullrun_mos2_xmm0202130101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue May  7 04:26:01 2013] fullrun_mos2_xmm0202130101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue May  7 04:26:01 2013] Fit fullrun_mos2_xmm0202130101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue May  7 04:26:16 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Tue May  7 04:26:16 2013] Vigneting correction estimate = 1.000000
[Tue May  7 04:26:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 04:26:16 2013] Assessing source extent using major
[Tue May  7 04:26:16 2013] Source does appear to be extended
[Tue May  7 04:26:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 05:24:13 2013] XMMSAS src. selection expression = ellipse(25896.621521, 23459.832977, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  7 05:24:13 2013] Writing source region out to fullrun_mos2_xmm0202130101_pi300-10000_pass1_cl_src16_src.reg
[Tue May  7 05:24:13 2013] Extracting stamp from image fullrun_mos2_xmm0202130101_pi300-10000_cl_sm2.00.img.gz, (261, 233) - (336, 308)
[Tue May  7 05:24:13 2013] XMMSAS bgd. selection expression = annulus(25896.621521, 23459.832977, 1087.500000, 2175.000000, X, Y) && !ellipse(24537.445648, 23629.741577, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  7 05:24:13 2013] Writing fullrun_mos2_xmm0202130101_pi300-10000_pass1_cl_src16.gif
[Tue May  7 05:26:52 2013] Mean detx,y = (-800.43, -205.17) 
[Tue May  7 05:26:53 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May  7 05:27:01 2013] Binned source spectrum to 10 counts/bin
[Tue May  7 05:27:01 2013] Setting source spectrum file to fullrun_mos2_xmm0202130101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue May  7 05:27:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0202130101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue May  7 05:36:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  7 05:36:59 2013] rmf not generated due to insufficient counts
[Tue May  7 05:39:45 2013] Updating aperture counts using extracted products
[Tue May  7 05:39:45 2013] Total counts from fullrun_mos2_xmm0202130101_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 339.00
[Tue May  7 05:39:45 2013] Total counts from fullrun_mos2_xmm0202130101_pi300-10000_pass1_cl_src16_bgd.pi.gz = 1161.00
[Tue May  7 05:39:45 2013] Got source and background scale factors 1146608.000000, 9023284.000000
[Tue May  7 05:39:45 2013] User source parameters:
  Position = (298.2, 270.2) = 2 15 47.06 -73 50 46.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 191.5 +/- 19.4
  Background aperture counts = 147.5
  Rate = 0.005 +/- 0.0005

[Tue May  7 05:39:45 2013] Updating counts from extracted products
[Tue May  7 05:39:45 2013] Set source signif. to 191.47/12.15 = 15.76
[Tue May  7 05:39:49 2013] Calculating source flux in energy range 0.30-8.00
[Tue May  7 05:39:49 2013] Using photon index=1.80, rate=0.00488, arf fullrun_mos2_xmm0202130101_pi300-10000_pass1_cl_src16.arf
[Tue May  7 05:39:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  7 05:39:49 2013] Updating source flux to 5.6e-14
[Tue May  7 05:39:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May  7 05:39:54 2013] xmm0202130101/analysis//spectral/fullrun_mos2_xmm0202130101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete