[Thu Jul  5 09:11:10 2012] Detection parameters:
  Position = (314.2, 315.9) = 5 54 53.87 46 26 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194568.5 +/- 522.9
  Background counts = 62.9
  Rate = 5 +/- 0.01

[Thu Jul  5 09:11:10 2012] Off-axis axis estimate = 1.71'
[Thu Jul  5 10:43:21 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 10:43:21 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Jul  5 10:43:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Thu Jul  5 10:43:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Jul  5 10:59:40 2012] fullrun_mos2_xmm0201930201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul  5 10:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201930201_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 10:59:40 2012] fullrun_mos2_xmm0201930201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul  5 10:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201930201_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 10:59:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201930201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201930201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 10:59:40 2012] fullrun_mos2_xmm0201930201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul  5 10:59:40 2012] fullrun_mos2_xmm0201930201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul  5 10:59:40 2012] Fit fullrun_mos2_xmm0201930201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul  5 10:59:46 2012] Spatial fit model total counts = 158388.000000, observed total counts = 162425.000000
[Thu Jul  5 10:59:46 2012] Offset between fit and detection position for source 2 = 0.192273 pixels
[Thu Jul  5 10:59:46 2012] 158038.000000 total counts/ 25600.000000 bgd. counts: snr = 827.737500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.192273 pixels
  Position = (314.1, 315.8) = 5 54 53.94 46 26 22.0
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 132438.0 +/- 397.5
  Background counts = 25600.0
  Rate = 4 +/- 0.01
[Thu Jul  5 10:59:46 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 10:59:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 10:59:46 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 10:59:46 2012] Source does appear to be extended
[Thu Jul  5 10:59:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 12:02:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 12:02:47 2012] Initial guess for spatial extent in simple fitting = 5.67"
[Thu Jul  5 12:02:47 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.230
[Thu Jul  5 12:02:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.67"
[Thu Jul  5 12:10:59 2012] fullrun_mos2_xmm0201930201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  5 12:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201930201_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 12:10:59 2012] fullrun_mos2_xmm0201930201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  5 12:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201930201_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 12:10:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201930201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201930201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 12:10:59 2012] fullrun_mos2_xmm0201930201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  5 12:10:59 2012] fullrun_mos2_xmm0201930201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  5 12:10:59 2012] Fit fullrun_mos2_xmm0201930201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul  5 12:11:01 2012] Spatial fit model total counts = 158450.000000, observed total counts = 162530.000000
[Thu Jul  5 12:11:01 2012] Offset between fit and detection position for source 2 = 0.013149 pixels
[Thu Jul  5 12:11:01 2012] 158607.000000 total counts/ 25600.000000 bgd. counts: snr = 831.293750
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.013149 pixels
  Position = (314.1, 315.8) = 5 54 53.94 46 26 21.9
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 133007.0 +/- 398.3
  Background counts = 25600.0
  Rate = 4 +/- 0.01
[Thu Jul  5 12:11:01 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 12:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 12:11:01 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 12:11:01 2012] Source does appear to be extended
[Thu Jul  5 12:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 00:48:45 2012] Counts = 133007.000000, rescaling region sizes by 3.000000
[Fri Jul  6 00:48:45 2012] XMMSAS src. selection expression = ellipse(27275.741700, 27421.846600, 1027.535430, 1027.535430, 0.000000, X, Y)
[Fri Jul  6 00:48:45 2012] Writing source region out to fullrun_mos2_xmm0201930201_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul  6 00:48:45 2012] Extracting stamp from image fullrun_mos2_xmm0201930201_pi300-10000_cl_sm2.00.img.gz, (255, 257) - (373, 375)
[Fri Jul  6 00:48:45 2012] XMMSAS bgd. selection expression = annulus(27275.741700, 27421.846600, 5137.677148, 10275.354296, X, Y) && !ellipse(28459.754944, 18351.800873, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 00:48:45 2012] Writing fullrun_mos2_xmm0201930201_pi300-10000_pass1_cl_src2.gif
[Fri Jul  6 00:49:00 2012] Mean detx,y = (110.06, 79.97) 
[Fri Jul  6 00:49:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 00:51:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 00:51:11 2012] Setting source spectrum file to fullrun_mos2_xmm0201930201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul  6 00:51:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201930201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul  6 00:55:25 2012] Updating aperture counts using extracted products
[Fri Jul  6 00:55:25 2012] Error reading totcts from fullrun_mos2_xmm0201930201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul  6 00:55:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 00:55:25 2012] Using photon index=1.80, rate=3.65, arf fullrun_mos2_xmm0201930201_pi300-10000_pass1_cl_src2.arf
[Fri Jul  6 00:55:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 00:55:26 2012] Updating source flux to 3.7e-11
[Fri Jul  6 00:55:51 2012] Reading fit data from xmm0201930201/analysis//spectral/fullrun_mos2_xmm0201930201_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul  6 00:55:51 2012] Spectral fit parameter nH value = 1.76219e+21
[Fri Jul  6 00:55:51 2012] Spectral fit parameter PhoIndex value = 1.70525
[Fri Jul  6 00:55:51 2012] Failed to get F(0.3-8.0) from xmm0201930201/analysis//spectral/fullrun_mos2_xmm0201930201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul  6 00:55:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 00:55:51 2012] Using Nh = 1.8e+21, photon index=1.71, rate=3.65, arf fullrun_mos2_xmm0201930201_pi300-10000_pass1_cl_src2.arf
[Fri Jul  6 00:55:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 00:55:51 2012] Updating source flux to 4.4e-11