[Wed Mar 21 10:16:59 2012] Detection parameters:
  Position = (439.0, 409.6) = 12 35 53.63 -33 44 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.4 +/- 13.4
  Background counts = 16.4
  Rate = 0.007 +/- 0.001

[Wed Mar 21 10:17:00 2012] Off-axis axis estimate = 12.99'
[Wed Mar 21 10:20:01 2012] Using EEF radius (= 12.92 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 10:20:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 10:20:01 2012] Initial guess for spatial extent in simple fitting = 12.92"
[Wed Mar 21 10:20:01 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.872
[Wed Mar 21 10:20:01 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.92"
[Wed Mar 21 12:51:55 2012] fullrun_pn_xmm0201903701_pi300-10000_cl_pass0_src7.ximg exists
[Wed Mar 21 12:51:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903701_pi300-10000_cl_pass0_src7.csv
[Wed Mar 21 12:51:55 2012] fullrun_pn_xmm0201903701_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Mar 21 12:51:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903701_pi300-10000_cl_pass0_src7.csv
[Wed Mar 21 12:51:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903701_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903701_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 12:51:56 2012] fullrun_pn_xmm0201903701_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Mar 21 12:51:56 2012] fullrun_pn_xmm0201903701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Mar 21 12:51:56 2012] Fit fullrun_pn_xmm0201903701_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Mar 21 17:05:53 2012] Spatial fit model total counts = 235.996000, observed total counts = 236.000000
[Wed Mar 21 17:05:53 2012] Offset between fit and detection position for source 7 = 1.118515 pixels
[Wed Mar 21 17:05:53 2012] 234.725200 total counts/ 167.358000 bgd. counts: snr = 5.207452
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.118515 pixels
  Position = (438.1, 408.8) = 12 35 53.93 -33 44 31.7
  Extent = 8.9 (5.2-12.9)", rotation angle = 0
  Source counts = 67.4 +/- 15.3
  Background counts = 167.4
  Rate = 0.006 +/- 0.001
[Wed Mar 21 17:05:53 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 17:05:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 17:05:53 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 17:05:53 2012] Source does appear to be extended
[Wed Mar 21 17:05:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 17:06:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 17:06:29 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Wed Mar 21 17:06:29 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.962
[Wed Mar 21 17:06:29 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.91"
[Wed Mar 21 19:14:26 2012] fullrun_pn_xmm0201903701_pi300-10000_cl_pass1_src7.ximg exists
[Wed Mar 21 19:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903701_pi300-10000_cl_pass1_src7.csv
[Wed Mar 21 19:14:26 2012] fullrun_pn_xmm0201903701_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Mar 21 19:14:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903701_pi300-10000_cl_pass1_src7.csv
[Wed Mar 21 19:14:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903701_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903701_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 19:14:27 2012] fullrun_pn_xmm0201903701_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Mar 21 19:14:27 2012] fullrun_pn_xmm0201903701_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Mar 21 19:14:27 2012] Fit fullrun_pn_xmm0201903701_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Mar 21 23:10:15 2012] Warning, spatial fit 7 centroid is now closest to src. 14
[Wed Mar 21 23:10:15 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 23:10:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 23:10:15 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 23:10:15 2012] Source does appear to be extended
[Wed Mar 21 23:10:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 23:10:46 2012] XMMSAS src. selection expression = ellipse(38068.500200, 35519.936200, 534.642615, 534.642615, 0.000000, X, Y)
[Wed Mar 21 23:10:46 2012] Writing source region out to fullrun_pn_xmm0201903701_pi300-10000_pass1_cl_src7_src.reg
[Wed Mar 21 23:10:46 2012] Extracting stamp from image fullrun_pn_xmm0201903701_pi300-10000_cl_sm2.00.img.gz, (407, 378) - (469, 440)
[Wed Mar 21 23:10:46 2012] XMMSAS bgd. selection expression = annulus(38068.500200, 35519.936200, 891.071026, 1782.142051, X, Y)
[Wed Mar 21 23:10:46 2012] Writing fullrun_pn_xmm0201903701_pi300-10000_pass1_cl_src7.gif
[Wed Mar 21 23:16:25 2012] Mean detx,y = (-15797.85, 6154.15) 
[Wed Mar 21 23:16:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 23:16:47 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 23:16:48 2012] Setting source spectrum file to fullrun_pn_xmm0201903701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Mar 21 23:16:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0201903701_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Mar 21 23:53:16 2012] Not generating rmf since there are only 67 counts
[Wed Mar 21 23:53:16 2012] rmf not generated due to insufficient counts
[Thu Mar 22 03:16:16 2012] Updating aperture counts using extracted products
[Thu Mar 22 03:16:16 2012] Error reading totcts from fullrun_pn_xmm0201903701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Mar 22 03:16:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 03:16:17 2012] Using photon index=1.80, rate=0.00576, arf fullrun_pn_xmm0201903701_pi300-10000_pass1_cl_src7.arf
[Thu Mar 22 03:16:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 03:16:17 2012] Updating source flux to 4.8e-14
[Thu Mar 22 03:19:31 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Mar 22 03:19:43 2012] xmm0201903701/analysis//spectral/fullrun_pn_xmm0201903701_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete