[Wed Mar 21 10:17:41 2012] Detection parameters:
  Position = (312.6, 247.3) = 12 36 37.69 -33 56 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.9 +/- 13.2
  Background counts = 24.9
  Rate = 0.005 +/- 0.0009

[Wed Mar 21 10:17:41 2012] Off-axis axis estimate = 3.85'
[Wed Mar 21 12:51:56 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 12:51:56 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Wed Mar 21 12:51:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.067
[Wed Mar 21 12:51:56 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.35"
[Wed Mar 21 15:06:51 2012] fullrun_mos1_xmm0201903701_pi300-10000_cl_pass0_src10.ximg exists
[Wed Mar 21 15:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903701_pi300-10000_cl_pass0_src10.csv
[Wed Mar 21 15:06:51 2012] fullrun_mos1_xmm0201903701_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Mar 21 15:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903701_pi300-10000_cl_pass0_src10.csv
[Wed Mar 21 15:06:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201903701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201903701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 15:06:51 2012] fullrun_mos1_xmm0201903701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Mar 21 15:06:51 2012] fullrun_mos1_xmm0201903701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Mar 21 15:06:51 2012] Fit fullrun_mos1_xmm0201903701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Mar 21 17:06:02 2012] Spatial fit model total counts = 782.740000, observed total counts = 775.000000
[Wed Mar 21 17:06:02 2012] Offset between fit and detection position for source 18 = 5.910610 pixels
[Wed Mar 21 17:06:02 2012] 753.882000 total counts/ 602.454000 bgd. counts: snr = 6.169419
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 5.910610 pixels
  Position = (316.5, 242.8) = 12 36 36.35 -33 56 34.5
  Extent = 16.7 (16.7-33.4)", rotation angle = 0
  Source counts = 151.4 +/- 27.5
  Background counts = 602.5
  Rate = 0.01 +/- 0.002
[Wed Mar 21 17:06:02 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 17:06:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 17:06:02 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 17:06:02 2012] Source does appear to be extended
[Wed Mar 21 17:06:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 17:06:02 2012] Source is confused with source 20
[Wed Mar 21 17:06:02 2012] Source is confused with source 17
[Wed Mar 21 19:14:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 19:14:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 21 19:14:27 2012] Initial guess for spatial extent in simple fitting = 16.71"
[Wed Mar 21 19:14:27 2012] source mask rpix=3.8, npix_max = 75, mask sum = 54, frac = 0.717
[Wed Mar 21 19:14:27 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 16.71"
[Wed Mar 21 21:11:34 2012] fullrun_mos1_xmm0201903701_pi300-10000_cl_pass1_src9.ximg exists
[Wed Mar 21 21:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903701_pi300-10000_cl_pass1_src9.csv
[Wed Mar 21 21:11:34 2012] fullrun_mos1_xmm0201903701_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Mar 21 21:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903701_pi300-10000_cl_pass1_src9.csv
[Wed Mar 21 21:11:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201903701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201903701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 21:11:34 2012] fullrun_mos1_xmm0201903701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Mar 21 21:11:34 2012] fullrun_mos1_xmm0201903701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Mar 21 21:11:34 2012] Fit fullrun_mos1_xmm0201903701_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Mar 21 23:10:23 2012] Warning, spatial fit 9 centroid is now closest to src. 3
[Wed Mar 21 23:10:23 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 23:10:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 23:10:23 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 23:10:23 2012] Source does appear to be extended
[Wed Mar 21 23:10:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 00:16:27 2012] XMMSAS src. selection expression = ellipse(27484.246000, 21075.080000, 1002.312029, 1002.312029, 0.000000, X, Y)
[Thu Mar 22 00:16:27 2012] Writing source region out to fullrun_mos1_xmm0201903701_pi300-10000_pass1_cl_src18_src.reg
[Thu Mar 22 00:16:27 2012] Extracting stamp from image fullrun_mos1_xmm0201903701_pi300-10000_cl_sm2.00.img.gz, (259, 185) - (374, 300)
[Thu Mar 22 00:16:27 2012] XMMSAS bgd. selection expression = annulus(27484.246000, 21075.080000, 1670.520048, 3341.040096, X, Y) && !ellipse(26328.119600, 22371.188000, 1585.408046, 843.824024, 83.283000, X, Y) && !ellipse(26144.078000, 22868.942000, 1113.256032, 472.148814, 155.027000, X, Y) && !ellipse(26443.854000, 22295.170000, 2273.352065, 2273.352065, 0.000000, X, Y) && !ellipse(24885.400000, 21689.740000, 1032.176030, 1032.176030, 0.000000, X, Y) && !ellipse(25019.098000, 22853.900000, 1221.152035, 1221.152035, 0.000000, X, Y) && !ellipse(25803.881348, 21101.430191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.955475, 21097.869797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24361.414000, 23355.866000, 2442.304070, 2442.304070, 0.000000, X, Y) && !ellipse(24589.547943, 22904.443329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.110870, 21097.054703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23798.569580, 22419.483643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25364.698800, 24492.524000, 880.712025, 880.712025, 0.000000, X, Y) && !ellipse(25187.350000, 23535.538000, 2400.832069, 2400.832069, 0.000000, X, Y) && !ellipse(24794.112000, 20242.364000, 1856.680053, 1663.264048, 257.186583, X, Y)
[Thu Mar 22 00:16:27 2012] Writing fullrun_mos1_xmm0201903701_pi300-10000_pass1_cl_src18.gif
[Thu Mar 22 00:19:30 2012] Mean detx,y = (3448.08, -1091.64) 
[Thu Mar 22 00:19:32 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 00:20:25 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 00:20:25 2012] Setting source spectrum file to fullrun_mos1_xmm0201903701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Mar 22 00:20:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201903701_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Mar 22 03:16:19 2012] Updating aperture counts using extracted products
[Thu Mar 22 03:16:19 2012] Error reading totcts from fullrun_mos1_xmm0201903701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Mar 22 03:16:20 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 03:16:20 2012] Using photon index=1.80, rate=0.00972, arf fullrun_mos1_xmm0201903701_pi300-10000_pass1_cl_src18.arf
[Thu Mar 22 03:16:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 03:16:20 2012] Updating source flux to 1e-13
[Thu Mar 22 03:16:24 2012] Flag c found in src. 18 procflags, skipping spectral fitting