[Wed Nov 23 22:17:23 2011] Detection parameters:
  Position = (416.0, 155.0) = 8 21 15.82 1 3 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.5 +/- 11.1
  Background counts = 6.5
  Rate = 0.009 +/- 0.001

[Wed Nov 23 22:17:24 2011] Off-axis axis estimate = 13.45'
[Wed Nov 23 22:18:37 2011] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:18:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 23 22:18:37 2011] Initial guess for spatial extent in simple fitting = 13.15"
[Wed Nov 23 22:18:37 2011] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.926
[Wed Nov 23 22:18:37 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 13.15"
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src38.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src38.csv
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src38.csv
[Wed Nov 23 23:34:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Nov 23 23:34:26 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Thu Nov 24 02:18:54 2011] Warning, spatial fit 38 centroid is now closest to src. 39
[Thu Nov 24 02:18:54 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:18:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:18:54 2011] Assessing source extent using major
[Thu Nov 24 02:18:54 2011] Source does appear to be extended
[Thu Nov 24 02:18:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 02:19:17 2011] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:19:17 2011] Initial guess for spatial extent in simple fitting = 13.15"
[Thu Nov 24 02:19:17 2011] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.926
[Thu Nov 24 02:19:17 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 13.15"
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src30.ximg exists
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu Nov 24 03:52:42 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src30 appears to have run properly
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu Nov 24 03:52:43 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Nov 24 03:52:43 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Thu Nov 24 06:13:50 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 69.450210 pixels away
[Thu Nov 24 06:13:50 2011] Source 41 is offset by 4.270242 and -6.714241 pixels which is larger than
2 X fitted extent = 2.046589 x 2.046589, not incorporating fit results
[Thu Nov 24 06:13:50 2011] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 64.229864 pixels away
[Thu Nov 24 06:13:50 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:13:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:13:50 2011] Assessing source extent using major
[Thu Nov 24 06:13:50 2011] Source does appear to be extended
[Thu Nov 24 06:13:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 06:14:13 2011] XMMSAS src. selection expression = ellipse(36147.671051, 13440.221024, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Nov 24 06:14:13 2011] Writing source region out to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src41_src.reg
[Thu Nov 24 06:14:13 2011] Extracting stamp from image fullrun_pn_xmm0201903601_pi300-10000_cl_sm2.00.img.gz, (379, 118) - (454, 193)
[Thu Nov 24 06:14:13 2011] XMMSAS bgd. selection expression = annulus(36147.671051, 13440.221024, 1087.500000, 2175.000000, X, Y)
[Thu Nov 24 06:14:13 2011] Writing fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src41.gif
[Thu Nov 24 06:27:04 2011] Mean detx,y = (-6593.63, -13706.82) 
[Thu Nov 24 06:27:06 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 06:27:36 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 06:27:36 2011] Setting source spectrum file to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Nov 24 06:27:36 2011] Setting bgd. spectrum file to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Nov 24 07:54:36 2011] Not generating rmf since there are only 67 counts
[Thu Nov 24 07:54:36 2011] rmf not generated due to insufficient counts
[Thu Nov 24 09:13:41 2011] Updating aperture counts using extracted products
[Thu Nov 24 09:13:41 2011] Error reading totcts from fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Nov 24 09:13:41 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 09:13:41 2011] Using photon index=1.80, rate=0.00872, arf fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src41.arf
[Thu Nov 24 09:13:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 09:13:41 2011] Updating source flux to 6.2e-14
[Thu Nov 24 09:14:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting