[Wed Nov 23 22:17:23 2011] Detection parameters:
  Position = (281.8, 228.1) = 8 21 54.75 1 9 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.7 +/- 9.5
  Background counts = 15.4
  Rate = 0.007 +/- 0.002

[Wed Nov 23 22:17:24 2011] Off-axis axis estimate = 5.24'
[Wed Nov 23 22:18:37 2011] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:18:37 2011] Initial guess for spatial extent in simple fitting = 9.05"
[Wed Nov 23 22:18:37 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Wed Nov 23 22:18:37 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 9.05"
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src34.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src34.csv
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src34_1.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src34.csv
[Wed Nov 23 23:34:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Wed Nov 23 23:34:26 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Thu Nov 24 02:18:54 2011] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 11.286183 pixels away
[Thu Nov 24 02:18:54 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:18:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:18:54 2011] Assessing source extent using major
[Thu Nov 24 02:18:54 2011] Source does appear to be extended
[Thu Nov 24 02:18:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 02:19:17 2011] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:19:17 2011] Initial guess for spatial extent in simple fitting = 9.05"
[Thu Nov 24 02:19:17 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Thu Nov 24 02:19:17 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 9.05"
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src26.ximg exists
[Thu Nov 24 03:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src26.csv
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu Nov 24 03:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src26.csv
[Thu Nov 24 03:52:42 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Nov 24 03:52:42 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Thu Nov 24 06:13:50 2011] Source 36 is offset by -2.908344 and 6.904210 pixels which is larger than
2 X fitted extent = 1.039871 x 1.039871, not incorporating fit results
[Thu Nov 24 06:13:50 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:13:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:13:50 2011] Assessing source extent using major
[Thu Nov 24 06:13:50 2011] Source does appear to be extended
[Thu Nov 24 06:13:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 06:14:13 2011] XMMSAS src. selection expression = ellipse(24469.960114, 19800.070236, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Nov 24 06:14:13 2011] Writing source region out to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src36_src.reg
[Thu Nov 24 06:14:13 2011] Extracting stamp from image fullrun_pn_xmm0201903601_pi300-10000_cl_sm2.00.img.gz, (244, 191) - (319, 266)
[Thu Nov 24 06:14:13 2011] XMMSAS bgd. selection expression = annulus(24469.960114, 19800.070236, 1087.500000, 2175.000000, X, Y) && !ellipse(27633.270000, 22524.128000, 1263.120036, 1263.120036, 0.000000, X, Y) && !ellipse(24853.677800, 22242.256000, 964.072028, 964.072028, 0.000000, X, Y) && !ellipse(26024.020447, 21743.262283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.502920, 22078.264000, 1330.952038, 1330.952038, 0.000000, X, Y) && !ellipse(24975.376801, 21470.304031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23355.968000, 21837.290000, 706.472820, 706.472820, 0.000000, X, Y) && !ellipse(22231.808000, 21148.274000, 1394.936040, 1394.936040, 0.000000, X, Y) && !ellipse(23739.829712, 20819.731583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25541.942440, 20706.188000, 641.109618, 641.109618, 0.000000, X, Y)
[Thu Nov 24 06:14:13 2011] Writing fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src36.gif
[Thu Nov 24 06:25:20 2011] Mean detx,y = (2269.73, -3830.16) 
[Thu Nov 24 06:25:22 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 06:25:40 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 06:25:40 2011] Setting source spectrum file to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Nov 24 06:25:40 2011] Setting bgd. spectrum file to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu Nov 24 07:54:26 2011] Not generating rmf since there are only 39 counts
[Thu Nov 24 07:54:26 2011] rmf not generated due to insufficient counts
[Thu Nov 24 09:13:41 2011] Updating aperture counts using extracted products
[Thu Nov 24 09:13:41 2011] Error reading totcts from fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Nov 24 09:13:41 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 09:13:41 2011] Using photon index=1.80, rate=0.00691, arf fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src36.arf
[Thu Nov 24 09:13:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 09:13:41 2011] Updating source flux to 2.1e-14
[Thu Nov 24 09:14:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting