[Wed Nov 23 22:17:23 2011] Detection parameters:
  Position = (294.1, 240.9) = 8 21 51.20 1 10 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.0 +/- 9.7
  Background counts = 17.8
  Rate = 0.008 +/- 0.002

[Wed Nov 23 22:17:24 2011] Off-axis axis estimate = 4.18'
[Wed Nov 23 22:18:37 2011] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:18:37 2011] Initial guess for spatial extent in simple fitting = 8.52"
[Wed Nov 23 22:18:37 2011] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.910
[Wed Nov 23 22:18:37 2011] Giving source the simple spatial ID 32 for pass 0, mean size = 8.52"
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src32.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src32.csv
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src32.csv
[Wed Nov 23 23:34:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed Nov 23 23:34:26 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Thu Nov 24 02:18:54 2011] Source 34 is offset by 0.108576 and -3.341970 pixels which is larger than
2 X fitted extent = 2.154253 x 2.154253, not incorporating fit results
[Thu Nov 24 02:18:54 2011] Warning, spatial fit 32 centroid is now closest to src. 27
[Thu Nov 24 02:18:54 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:18:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:18:54 2011] Assessing source extent using major
[Thu Nov 24 02:18:54 2011] Source does appear to be extended
[Thu Nov 24 02:18:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 02:19:17 2011] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:19:17 2011] Initial guess for spatial extent in simple fitting = 8.52"
[Thu Nov 24 02:19:17 2011] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.910
[Thu Nov 24 02:19:17 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 8.52"
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src25.ximg exists
[Thu Nov 24 03:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src25.csv
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Nov 24 03:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src25.csv
[Thu Nov 24 03:52:42 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Nov 24 03:52:42 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Nov 24 06:13:50 2011] Source 34 is offset by -0.052068 and -3.274429 pixels which is larger than
2 X fitted extent = 2.056175 x 2.056175, not incorporating fit results
[Thu Nov 24 06:13:50 2011] Spatial fit model total counts = 331.049000, observed total counts = 331.000000
[Thu Nov 24 06:13:50 2011] Offset between fit and detection position for source 34 = 2.368567 pixels
[Thu Nov 24 06:13:50 2011] 328.238800 total counts/ 293.345000 bgd. counts: snr = 2.037318
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 2.368567 pixels
  Position = (294.1, 238.6) = 8 21 51.18 1 10 1.5
  Extent = 8.0 (3.6-16.2)", rotation angle = 0
  Source counts = 34.9 +/- 18.1
  Background counts = 293.3
  Rate = 0.005 +/- 0.002
[Thu Nov 24 06:13:50 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:13:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:13:50 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 06:13:50 2011] Source does appear to be extended
[Thu Nov 24 06:13:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 06:14:13 2011] XMMSAS src. selection expression = ellipse(25541.942440, 20706.188000, 480.832214, 480.832214, 0.000000, X, Y)
[Thu Nov 24 06:14:13 2011] Writing source region out to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src34_src.reg
[Thu Nov 24 06:14:13 2011] Extracting stamp from image fullrun_pn_xmm0201903601_pi300-10000_cl_sm2.00.img.gz, (267, 211) - (322, 266)
[Thu Nov 24 06:14:13 2011] XMMSAS bgd. selection expression = annulus(25541.942440, 20706.188000, 801.387023, 1602.774046, X, Y) && !ellipse(25034.212000, 23447.160800, 1186.536034, 1186.536034, 0.000000, X, Y) && !ellipse(27110.240723, 23157.669403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.270000, 22524.128000, 1263.120036, 1263.120036, 0.000000, X, Y) && !ellipse(24853.677800, 22242.256000, 964.072028, 964.072028, 0.000000, X, Y) && !ellipse(28062.052000, 21972.694000, 1291.456037, 1291.456037, 0.000000, X, Y) && !ellipse(25753.838800, 22755.606000, 599.395217, 599.395217, 0.000000, X, Y) && !ellipse(26024.020447, 21743.262283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.502920, 22078.264000, 1330.952038, 1330.952038, 0.000000, X, Y) && !ellipse(24975.376801, 21470.304031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23355.968000, 21837.290000, 706.472820, 706.472820, 0.000000, X, Y) && !ellipse(23739.829712, 20819.731583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24469.960114, 19800.070236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.345900, 19031.424600, 433.503212, 433.503212, 0.000000, X, Y)
[Thu Nov 24 06:14:13 2011] Writing fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src34.gif
[Thu Nov 24 06:25:03 2011] Mean detx,y = (1059.55, -3254.50) 
[Thu Nov 24 06:25:05 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 06:25:15 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 06:25:16 2011] Setting source spectrum file to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Nov 24 06:25:16 2011] Setting bgd. spectrum file to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Nov 24 07:54:24 2011] Not generating rmf since there are only 34 counts
[Thu Nov 24 07:54:24 2011] rmf not generated due to insufficient counts
[Thu Nov 24 09:13:40 2011] Updating aperture counts using extracted products
[Thu Nov 24 09:13:41 2011] Error reading totcts from fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Nov 24 09:13:41 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 09:13:41 2011] Using photon index=1.80, rate=0.00451, arf fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src34.arf
[Thu Nov 24 09:13:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 09:13:41 2011] Updating source flux to 1.4e-14
[Thu Nov 24 09:14:28 2011] Flag b found in src. 34 procflags, skipping spectral fitting
[Thu Nov 24 09:14:28 2011] Source 34 has fewer than 100.000000 counts, skipping spectral fitting