[Wed Nov 23 22:17:23 2011] Detection parameters:
  Position = (261.6, 247.1) = 8 22 0.61 1 10 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.2 +/- 8.4
  Background counts = 17.5
  Rate = 0.008 +/- 0.002

[Wed Nov 23 22:17:24 2011] Off-axis axis estimate = 4.58'
[Wed Nov 23 22:18:37 2011] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:18:37 2011] Initial guess for spatial extent in simple fitting = 8.72"
[Wed Nov 23 22:18:37 2011] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.718
[Wed Nov 23 22:18:37 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 8.72"
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src29.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src29.csv
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src29.csv
[Wed Nov 23 23:34:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Nov 23 23:34:26 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Thu Nov 24 02:18:54 2011] Warning, spatial fit 29 centroid is now closest to src. 30
[Thu Nov 24 02:18:54 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:18:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:18:54 2011] Assessing source extent using major
[Thu Nov 24 02:18:54 2011] Source does appear to be extended
[Thu Nov 24 02:18:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 02:19:17 2011] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:19:17 2011] Initial guess for spatial extent in simple fitting = 8.72"
[Thu Nov 24 02:19:17 2011] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.718
[Thu Nov 24 02:19:17 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 8.72"
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src23.ximg exists
[Thu Nov 24 03:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src23.csv
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Nov 24 03:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src23.csv
[Thu Nov 24 03:52:42 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Nov 24 03:52:42 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Nov 24 06:13:50 2011] Spatial fit model total counts = 250.002000, observed total counts = 251.000000
[Thu Nov 24 06:13:50 2011] Offset between fit and detection position for source 31 = 6.513248 pixels
[Thu Nov 24 06:13:50 2011] 253.430000 total counts/ 128.514000 bgd. counts: snr = 11.019017
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 6.513248 pixels
  Position = (256.1, 243.6) = 8 22 2.21 1 10 23.6
  Extent = 17.4 (17.4-34.9)", rotation angle = 0
  Source counts = 124.9 +/- 15.9
  Background counts = 128.5
  Rate = 0.02 +/- 0.002
[Thu Nov 24 06:13:50 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:13:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:13:50 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 06:13:50 2011] Source does appear to be extended
[Thu Nov 24 06:13:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 06:14:13 2011] XMMSAS src. selection expression = ellipse(22231.808000, 21148.274000, 1046.202030, 1046.202030, 0.000000, X, Y)
[Thu Nov 24 06:14:13 2011] Writing source region out to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src31_src.reg
[Thu Nov 24 06:14:13 2011] Extracting stamp from image fullrun_pn_xmm0201903601_pi300-10000_cl_sm2.00.img.gz, (196, 184) - (316, 304)
[Thu Nov 24 06:14:13 2011] XMMSAS bgd. selection expression = annulus(22231.808000, 21148.274000, 1743.670050, 3487.340100, X, Y) && !ellipse(26327.662872, 25185.421478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.848000, 25302.562000, 1399.304040, 332.927210, 83.119000, X, Y) && !ellipse(18491.266240, 25053.074600, 658.716019, 658.716019, 0.000000, X, Y) && !ellipse(26490.728000, 24533.248000, 1149.624033, 1149.624033, 0.000000, X, Y) && !ellipse(25140.588654, 24137.242462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25830.268000, 23588.576000, 1149.624033, 1149.624033, 0.000000, X, Y) && !ellipse(25034.212000, 23447.160800, 1186.536034, 1186.536034, 0.000000, X, Y) && !ellipse(24853.677800, 22242.256000, 964.072028, 964.072028, 0.000000, X, Y) && !ellipse(25753.838800, 22755.606000, 599.395217, 599.395217, 0.000000, X, Y) && !ellipse(26024.020447, 21743.262283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.502920, 22078.264000, 1330.952038, 1330.952038, 0.000000, X, Y) && !ellipse(24975.376801, 21470.304031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23355.968000, 21837.290000, 706.472820, 706.472820, 0.000000, X, Y) && !ellipse(23739.829712, 20819.731583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25541.942440, 20706.188000, 641.109618, 641.109618, 0.000000, X, Y) && !ellipse(24469.960114, 19800.070236, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 06:14:13 2011] Writing fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src31.gif
[Thu Nov 24 06:23:59 2011] Mean detx,y = (3961.14, -1886.56) 
[Thu Nov 24 06:24:01 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 06:24:38 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 06:24:38 2011] Setting source spectrum file to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Nov 24 06:24:38 2011] Setting bgd. spectrum file to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Nov 24 09:13:40 2011] Updating aperture counts using extracted products
[Thu Nov 24 09:13:40 2011] Error reading totcts from fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Nov 24 09:13:41 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 09:13:41 2011] Using photon index=1.80, rate=0.0161, arf fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src31.arf
[Thu Nov 24 09:13:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 09:13:41 2011] Updating source flux to 4.5e-14