[Wed Nov 23 22:17:23 2011] Detection parameters:
  Position = (290.2, 253.1) = 8 21 52.31 1 11 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.0 +/- 13.1
  Background counts = 20.6
  Rate = 0.02 +/- 0.002

[Wed Nov 23 22:17:24 2011] Off-axis axis estimate = 3.34'
[Wed Nov 23 22:18:37 2011] Using EEF radius (= 8.10 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:18:37 2011] Initial guess for spatial extent in simple fitting = 8.10"
[Wed Nov 23 22:18:37 2011] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.762
[Wed Nov 23 22:18:37 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 8.10"
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src27.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src27.csv
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src27.csv
[Wed Nov 23 23:34:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Nov 23 23:34:26 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Nov 24 02:18:54 2011] Source 28 is offset by -4.074525 and 1.406296 pixels which is larger than
2 X fitted extent = 0.914133 x 0.914133, not incorporating fit results
[Thu Nov 24 02:18:54 2011] Warning, spatial fit 27 centroid is now closest to src. 23
[Thu Nov 24 02:18:54 2011] Spatial fit model total counts = 521.000000, observed total counts = 521.000000
[Thu Nov 24 02:18:54 2011] Offset between fit and detection position for source 28 = 2.292981 pixels
[Thu Nov 24 02:18:54 2011] Warning, changing simple spatial fit ID from 27 to 28
[Thu Nov 24 02:18:54 2011] 464.734000 total counts/ 284.646000 bgd. counts: snr = 10.674124
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.292981 pixels
  Position = (288.0, 252.7) = 8 21 52.96 1 11 3.2
  Extent = 16.6 (16.6-16.6)", rotation angle = 0
  Source counts = 180.1 +/- 21.6
  Background counts = 284.6
  Rate = 0.02 +/- 0.003
[Thu Nov 24 02:18:54 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:18:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:18:54 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 02:18:54 2011] Source does appear to be extended
[Thu Nov 24 02:18:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 02:18:54 2011] Source is confused with source 23
[Thu Nov 24 02:19:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:19:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 02:19:17 2011] Initial guess for spatial extent in simple fitting = 16.62"
[Thu Nov 24 02:19:17 2011] source mask rpix=3.8, npix_max = 74, mask sum = 70, frac = 0.938
[Thu Nov 24 02:19:17 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 16.62"
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src20.ximg exists
[Thu Nov 24 03:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src20.csv
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Nov 24 03:52:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src20.csv
[Thu Nov 24 03:52:42 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Nov 24 03:52:42 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Nov 24 03:52:42 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu Nov 24 06:13:50 2011] Warning, spatial fit 20 centroid is now closest to src. 27
[Thu Nov 24 06:13:50 2011] Spatial fit model total counts = 527.117000, observed total counts = 521.000000
[Thu Nov 24 06:13:50 2011] Offset between fit and detection position for source 28 = 1.932425 pixels
[Thu Nov 24 06:13:50 2011] Warning, changing simple spatial fit ID from 20 to 21
[Thu Nov 24 06:13:50 2011] 510.969000 total counts/ 368.133000 bgd. counts: snr = 7.444496
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 1.932425 pixels
  Position = (286.9, 254.3) = 8 21 53.28 1 11 10.1
  Extent = 16.6 (16.6-16.6)", rotation angle = 0
  Source counts = 142.8 +/- 22.6
  Background counts = 368.1
  Rate = 0.02 +/- 0.003
[Thu Nov 24 06:13:50 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:13:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:13:50 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 06:13:50 2011] Source does appear to be extended
[Thu Nov 24 06:13:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 06:14:13 2011] XMMSAS src. selection expression = ellipse(24910.502920, 22078.264000, 998.214029, 998.214029, 0.000000, X, Y)
[Thu Nov 24 06:14:13 2011] Writing source region out to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src28_src.reg
[Thu Nov 24 06:14:13 2011] Extracting stamp from image fullrun_pn_xmm0201903601_pi300-10000_cl_sm2.00.img.gz, (230, 197) - (344, 312)
[Thu Nov 24 06:14:13 2011] XMMSAS bgd. selection expression = annulus(24910.502920, 22078.264000, 1663.690048, 3327.380096, X, Y) && !ellipse(27778.515260, 25648.504000, 699.652820, 699.652820, 0.000000, X, Y) && !ellipse(26327.662872, 25185.421478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.848000, 25302.562000, 1399.304040, 332.927210, 83.119000, X, Y) && !ellipse(26490.728000, 24533.248000, 1149.624033, 1149.624033, 0.000000, X, Y) && !ellipse(25140.588654, 24137.242462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25830.268000, 23588.576000, 1149.624033, 1149.624033, 0.000000, X, Y) && !ellipse(25034.212000, 23447.160800, 1186.536034, 1186.536034, 0.000000, X, Y) && !ellipse(27110.240723, 23157.669403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27633.270000, 22524.128000, 1263.120036, 1263.120036, 0.000000, X, Y) && !ellipse(24853.677800, 22242.256000, 964.072028, 964.072028, 0.000000, X, Y) && !ellipse(28062.052000, 21972.694000, 1291.456037, 1291.456037, 0.000000, X, Y) && !ellipse(25753.838800, 22755.606000, 599.395217, 599.395217, 0.000000, X, Y) && !ellipse(26024.020447, 21743.262283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24975.376801, 21470.304031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23355.968000, 21837.290000, 706.472820, 706.472820, 0.000000, X, Y) && !ellipse(22231.808000, 21148.274000, 1394.936040, 1394.936040, 0.000000, X, Y) && !ellipse(23739.829712, 20819.731583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25541.942440, 20706.188000, 641.109618, 641.109618, 0.000000, X, Y) && !ellipse(24469.960114, 19800.070236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.345900, 19031.424600, 433.503212, 433.503212, 0.000000, X, Y)
[Thu Nov 24 06:14:13 2011] Writing fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src28.gif
[Thu Nov 24 06:22:44 2011] Mean detx,y = (1119.40, -1811.64) 
[Thu Nov 24 06:22:46 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 06:23:09 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 06:23:09 2011] Setting source spectrum file to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Nov 24 06:23:09 2011] Setting bgd. spectrum file to fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Nov 24 09:13:40 2011] Updating aperture counts using extracted products
[Thu Nov 24 09:13:40 2011] Error reading totcts from fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Nov 24 09:13:41 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 09:13:41 2011] Using photon index=1.80, rate=0.0185, arf fullrun_pn_xmm0201903601_pi300-10000_pass1_cl_src28.arf
[Thu Nov 24 09:13:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 09:13:41 2011] Updating source flux to 4.3e-14
[Thu Nov 24 09:14:28 2011] Flag b found in src. 28 procflags, skipping spectral fitting
[Thu Nov 24 09:14:28 2011] Flag c found in src. 28 procflags, skipping spectral fitting