[Wed Nov 23 22:17:23 2011] Detection parameters:
  Position = (292.7, 271.8) = 8 21 51.59 1 12 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.8 +/- 16.7
  Background counts = 22.8
  Rate = 0.02 +/- 0.003

[Wed Nov 23 22:17:24 2011] Off-axis axis estimate = 1.97'
[Wed Nov 23 22:18:37 2011] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 22:18:37 2011] Initial guess for spatial extent in simple fitting = 7.42"
[Wed Nov 23 22:18:37 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.029
[Wed Nov 23 22:18:37 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 7.42"
[Wed Nov 23 23:34:25 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src19.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src19.csv
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Nov 23 23:34:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src19.csv
[Wed Nov 23 23:34:26 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Nov 23 23:34:26 2011] fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Nov 23 23:34:26 2011] Fit fullrun_pn_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Nov 24 02:18:54 2011] Spatial fit model total counts = 586.348000, observed total counts = 584.000000
[Thu Nov 24 02:18:54 2011] Offset between fit and detection position for source 20 = 0.568500 pixels
[Thu Nov 24 02:18:54 2011] Warning, changing simple spatial fit ID from 19 to 15
[Thu Nov 24 02:18:54 2011] 584.951700 total counts/ 562.243000 bgd. counts: snr = 0.957702
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.568500 pixels
  Position = (292.5, 272.3) = 8 21 51.65 1 12 28.5
  Extent = 3.5 (1.8-6.6)", rotation angle = 0
  Source counts = 22.7 +/- 24.2
  Background counts = 562.2
  Rate = 0.003 +/- 0.003
  Deleting source due to low Poisson probability