[Wed Nov 23 22:17:58 2011] Detection parameters:
  Position = (144.8, 177.6) = 8 22 34.48 1 5 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.3 +/- 7.9
  Background counts = 2.7
  Rate = 0.003 +/- 0.0007

[Wed Nov 23 22:17:58 2011] Off-axis axis estimate = 14.17'
[Thu Nov 24 00:54:24 2011] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 00:54:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 00:54:24 2011] Initial guess for spatial extent in simple fitting = 13.51"
[Thu Nov 24 00:54:24 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.942
[Thu Nov 24 00:54:24 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 13.51"
[Thu Nov 24 02:18:44 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src23.ximg exists
[Thu Nov 24 02:18:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src23.csv
[Thu Nov 24 02:18:44 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Nov 24 02:18:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src23.csv
[Thu Nov 24 02:18:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 02:18:45 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Nov 24 02:18:45 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Nov 24 02:18:45 2011] Fit fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Nov 24 02:19:07 2011] Spatial fit model total counts = 70.241500, observed total counts = 71.000000
[Thu Nov 24 02:19:07 2011] Offset between fit and detection position for source 34 = 0.074839 pixels
[Thu Nov 24 02:19:07 2011] 69.110400 total counts/ 45.437600 bgd. counts: snr = 3.511898
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.074839 pixels
  Position = (144.9, 177.5) = 8 22 34.47 1 5 36.1
  Extent = 4.6 (3.4-6.6)", rotation angle = 0
  Source counts = 23.7 +/- 8.3
  Background counts = 45.4
  Rate = 0.002 +/- 0.0007
[Thu Nov 24 02:19:07 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:19:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:19:07 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 02:19:07 2011] Source does appear to be extended
[Thu Nov 24 02:19:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 05:05:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:05:44 2011] Initial guess for spatial extent in simple fitting = 4.59"
[Thu Nov 24 05:05:44 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.930
[Thu Nov 24 05:05:44 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 4.59"
[Thu Nov 24 06:13:41 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_src19.ximg exists
[Thu Nov 24 06:13:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_src19.csv
[Thu Nov 24 06:13:41 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Nov 24 06:13:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_src19.csv
[Thu Nov 24 06:13:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 06:13:42 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Nov 24 06:13:42 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Nov 24 06:13:42 2011] Fit fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Nov 24 06:14:01 2011] Spatial fit model total counts = 61.848500, observed total counts = 62.000000
[Thu Nov 24 06:14:01 2011] Offset between fit and detection position for source 34 = 0.123664 pixels
[Thu Nov 24 06:14:01 2011] 61.041200 total counts/ 39.440400 bgd. counts: snr = 3.439531
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.123664 pixels
  Position = (145.0, 177.6) = 8 22 34.43 1 5 36.1
  Extent = 4.0 (2.6-6.5)", rotation angle = 0
  Source counts = 21.6 +/- 7.8
  Background counts = 39.4
  Rate = 0.002 +/- 0.0007
[Thu Nov 24 06:14:01 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:14:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:14:01 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 06:14:01 2011] Source does appear to be extended
[Thu Nov 24 06:14:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 08:15:49 2011] XMMSAS src. selection expression = ellipse(12567.308262, 15398.369800, 242.670007, 242.670007, 0.000000, X, Y)
[Thu Nov 24 08:15:49 2011] Writing source region out to fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src34_src.reg
[Thu Nov 24 08:15:49 2011] Extracting stamp from image fullrun_mos2_xmm0201903601_pi300-10000_cl_sm2.00.img.gz, (131, 164) - (159, 191)
[Thu Nov 24 08:15:49 2011] XMMSAS bgd. selection expression = annulus(12567.308262, 15398.369800, 404.450012, 808.900023, X, Y)
[Thu Nov 24 08:15:49 2011] Writing fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src34.gif
[Thu Nov 24 08:19:23 2011] Mean detx,y = (-14837.50, 4035.86) 
[Thu Nov 24 08:19:24 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 08:19:30 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 08:19:31 2011] Setting source spectrum file to fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Nov 24 08:19:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Nov 24 09:07:01 2011] Not generating rmf since there are only 21 counts
[Thu Nov 24 09:07:01 2011] rmf not generated due to insufficient counts
[Thu Nov 24 09:13:42 2011] Updating aperture counts using extracted products
[Thu Nov 24 09:13:42 2011] Error reading totcts from fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Nov 24 09:13:42 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 09:13:42 2011] Using photon index=1.80, rate=0.00185, arf fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src34.arf
[Thu Nov 24 09:13:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 09:13:42 2011] Updating source flux to 6.9e-14
[Thu Nov 24 09:13:58 2011] Source 34 has fewer than 100.000000 counts, skipping spectral fitting