[Wed Nov 23 22:17:58 2011] Detection parameters:
  Position = (295.9, 263.0) = 8 21 50.67 1 11 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.8 +/- 18.1
  Background counts = 8.5
  Rate = 0.02 +/- 0.002

[Wed Nov 23 22:17:58 2011] Off-axis axis estimate = 2.57'
[Thu Nov 24 00:54:24 2011] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 00:54:24 2011] Initial guess for spatial extent in simple fitting = 7.72"
[Thu Nov 24 00:54:24 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Thu Nov 24 00:54:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.72"
[Thu Nov 24 02:18:44 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Nov 24 02:18:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 02:18:44 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Nov 24 02:18:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src1.csv
[Thu Nov 24 02:18:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 02:18:44 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Nov 24 02:18:44 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Nov 24 02:18:44 2011] Fit fullrun_mos2_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Nov 24 02:19:07 2011] Warning, spatial fit 1 centroid is now closest to src. 17
[Thu Nov 24 02:19:07 2011] Spatial fit model total counts = 646.034000, observed total counts = 645.000000
[Thu Nov 24 02:19:07 2011] Offset between fit and detection position for source 22 = 0.330440 pixels
[Thu Nov 24 02:19:07 2011] Warning, changing simple spatial fit ID from 1 to 4
[Thu Nov 24 02:19:07 2011] 631.516000 total counts/ 558.945000 bgd. counts: snr = 3.069577
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.330440 pixels
  Position = (296.1, 263.2) = 8 21 50.60 1 11 48.9
  Extent = 6.6 (5.0-9.5)", rotation angle = 0
  Source counts = 72.6 +/- 25.1
  Background counts = 558.9
  Rate = 0.006 +/- 0.002
[Thu Nov 24 02:19:07 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:19:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:19:07 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 02:19:07 2011] Source does appear to be extended
[Thu Nov 24 02:19:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 05:05:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Nov 24 05:05:44 2011] Initial guess for spatial extent in simple fitting = 6.60"
[Thu Nov 24 05:05:44 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.982
[Thu Nov 24 05:05:44 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.60"
[Thu Nov 24 06:13:41 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Nov 24 06:13:41 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Nov 24 06:13:41 2011] Fit fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Nov 24 06:13:41 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Nov 24 06:13:41 2011] fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Nov 24 06:13:41 2011] Fit fullrun_mos2_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Nov 24 06:14:01 2011] Spatial fit model total counts = 628.839000, observed total counts = 628.000000
[Thu Nov 24 06:14:01 2011] Offset between fit and detection position for source 22 = 0.491540 pixels
[Thu Nov 24 06:14:01 2011] 604.290000 total counts/ 440.052000 bgd. counts: snr = 7.829277
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.491540 pixels
  Position = (295.8, 262.8) = 8 21 50.68 1 11 47.2
  Extent = 9.8 (7.9-12.8)", rotation angle = 0
  Source counts = 164.2 +/- 24.6
  Background counts = 440.1
  Rate = 0.01 +/- 0.002
[Thu Nov 24 06:14:01 2011] Spatial fit model total counts = 447.769000, observed total counts = 449.000000
[Thu Nov 24 06:14:01 2011] Offset between fit and detection position for source 22 = 0.039467 pixels
[Thu Nov 24 06:14:01 2011] Warning, changing simple spatial fit ID from 1 to 7
[Thu Nov 24 06:14:01 2011] 440.248000 total counts/ 329.474000 bgd. counts: snr = 6.102774
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.039467 pixels
  Position = (295.8, 262.9) = 8 21 50.69 1 11 47.3
  Extent = 10.6 (7.9-14.9)", rotation angle = 0
  Source counts = 110.8 +/- 21.0
  Background counts = 329.5
  Rate = 0.009 +/- 0.002
[Thu Nov 24 06:14:01 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:14:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:14:01 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 06:14:01 2011] Source does appear to be extended
[Thu Nov 24 06:14:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 06:14:01 2011] Source is confused with source 20
[Thu Nov 24 08:15:49 2011] XMMSAS src. selection expression = ellipse(25687.034200, 22821.448000, 634.266018, 634.266018, 0.000000, X, Y)
[Thu Nov 24 08:15:49 2011] Writing source region out to fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src22_src.reg
[Thu Nov 24 08:15:49 2011] Extracting stamp from image fullrun_mos2_xmm0201903601_pi300-10000_cl_sm2.00.img.gz, (259, 226) - (332, 299)
[Thu Nov 24 08:15:49 2011] XMMSAS bgd. selection expression = annulus(25687.034200, 22821.448000, 1057.110030, 2114.220061, X, Y) && !ellipse(23037.154800, 21851.053800, 1452.096042, 1452.096042, 0.000000, X, Y) && !ellipse(26524.813800, 24181.988000, 1283.624037, 1283.624037, 0.000000, X, Y) && !ellipse(24742.362000, 21395.080000, 1859.592054, 1859.592054, 0.000000, X, Y) && !ellipse(25827.420837, 22159.306702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25925.346000, 23185.538000, 2132.416061, 2132.416061, 0.000000, X, Y) && !ellipse(24522.516418, 22838.452576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24486.835480, 23423.599792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26522.021637, 24569.191833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27683.939200, 25547.962600, 1139.664033, 1139.664033, 0.000000, X, Y) && !ellipse(27020.100000, 21458.054000, 1301.432037, 1301.432037, 0.000000, X, Y) && !ellipse(25294.664200, 23774.654000, 1056.208030, 1056.208030, 0.000000, X, Y) && !ellipse(28007.438000, 23655.670000, 1246.656036, 1246.656036, 0.000000, X, Y) && !ellipse(24162.741364, 22153.266510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25829.621857, 24936.467346, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Nov 24 08:15:49 2011] Writing fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src22.gif
[Thu Nov 24 08:15:51 2011] Mean detx,y = (1.90, 1208.79) 
[Thu Nov 24 08:15:52 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 08:15:57 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 08:15:57 2011] Setting source spectrum file to fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Nov 24 08:15:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Thu Nov 24 09:13:42 2011] Updating aperture counts using extracted products
[Thu Nov 24 09:13:42 2011] Error reading totcts from fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Nov 24 09:13:42 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 09:13:42 2011] Using photon index=1.80, rate=0.00949, arf fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src22.arf
[Thu Nov 24 09:13:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 09:13:42 2011] Updating source flux to 9.1e-14
[Thu Nov 24 09:13:58 2011] Flag c found in src. 22 procflags, skipping spectral fitting
[Thu Nov 24 09:14:28 2011] Reading fit data from xmm0201903601/analysis//spectral/fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src22_pl.csv
[Thu Nov 24 09:14:28 2011] Spectral fit parameter nH value = 1.75277e+21
[Thu Nov 24 09:14:28 2011] Spectral fit parameter PhoIndex value = 2.1349
[Thu Nov 24 09:14:28 2011] Failed to get F(0.3-8.0) from xmm0201903601/analysis//spectral/fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src22_pl.csv, possibly due to different flux energy range selected
[Thu Nov 24 09:14:28 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 09:14:28 2011] Using Nh = 1.8e+21, photon index=2.13, rate=0.00949, arf fullrun_mos2_xmm0201903601_pi300-10000_pass1_cl_src22.arf
[Thu Nov 24 09:14:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 09:14:28 2011] Updating source flux to 9.2e-14