[Wed Nov 23 22:17:41 2011] Detection parameters:
  Position = (410.6, 272.9) = 8 21 17.38 1 12 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.5 +/- 16.4
  Background counts = 3.5
  Rate = 0.02 +/- 0.001

[Wed Nov 23 22:17:41 2011] Off-axis axis estimate = 8.34'
[Wed Nov 23 23:34:26 2011] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 23:34:26 2011] Initial guess for spatial extent in simple fitting = 10.60"
[Wed Nov 23 23:34:26 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.044
[Wed Nov 23 23:34:26 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.60"
[Thu Nov 24 00:54:23 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_src3.ximg exists
[Thu Nov 24 00:54:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_src3.csv
[Thu Nov 24 00:54:23 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Nov 24 00:54:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_src3.csv
[Thu Nov 24 00:54:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 00:54:23 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Nov 24 00:54:23 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Nov 24 00:54:23 2011] Fit fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Nov 24 02:19:01 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.151243 pixels away
[Thu Nov 24 02:19:02 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 02:19:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 02:19:02 2011] Assessing source extent using major
[Thu Nov 24 02:19:02 2011] Source does appear to be extended
[Thu Nov 24 02:19:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 03:52:43 2011] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 03:52:43 2011] Initial guess for spatial extent in simple fitting = 10.60"
[Thu Nov 24 03:52:43 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.044
[Thu Nov 24 03:52:43 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 10.60"
[Thu Nov 24 05:05:43 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src3.ximg exists
[Thu Nov 24 05:05:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src3.csv
[Thu Nov 24 05:05:43 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Nov 24 05:05:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src3.csv
[Thu Nov 24 05:05:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 05:05:44 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Nov 24 05:05:44 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Nov 24 05:05:44 2011] Fit fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Nov 24 06:13:56 2011] Spatial fit model total counts = 211.999000, observed total counts = 212.000000
[Thu Nov 24 06:13:56 2011] Offset between fit and detection position for source 6 = 0.362937 pixels
[Thu Nov 24 06:13:56 2011] 210.102200 total counts/ 64.575200 bgd. counts: snr = 18.109677
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.362937 pixels
  Position = (410.3, 272.8) = 8 21 17.49 1 12 30.6
  Extent = 6.6 (5.7-7.8)", rotation angle = 0
  Source counts = 145.5 +/- 14.5
  Background counts = 64.6
  Rate = 0.01 +/- 0.001
[Thu Nov 24 06:13:56 2011] Vigneting correction estimate = 1.000000
[Thu Nov 24 06:13:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Nov 24 06:13:56 2011] Assessing source extent using major axis lower bound
[Thu Nov 24 06:13:56 2011] Source does appear to be extended
[Thu Nov 24 06:13:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Nov 24 07:58:55 2011] XMMSAS src. selection expression = ellipse(35646.083600, 23688.673200, 396.603611, 396.603611, 0.000000, X, Y)
[Thu Nov 24 07:58:55 2011] Writing source region out to fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src6_src.reg
[Thu Nov 24 07:58:55 2011] Extracting stamp from image fullrun_mos1_xmm0201903601_pi300-10000_cl_sm2.00.img.gz, (387, 250) - (433, 296)
[Thu Nov 24 07:58:56 2011] XMMSAS bgd. selection expression = annulus(35646.083600, 23688.673200, 661.006019, 1322.012038, X, Y)
[Thu Nov 24 07:58:56 2011] Writing fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src6.gif
[Thu Nov 24 07:59:20 2011] Mean detx,y = (3872.85, -9828.04) 
[Thu Nov 24 07:59:21 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Nov 24 07:59:28 2011] Binned source spectrum to 10 counts/bin
[Thu Nov 24 07:59:28 2011] Setting source spectrum file to fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Nov 24 07:59:28 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Nov 24 09:13:41 2011] Updating aperture counts using extracted products
[Thu Nov 24 09:13:41 2011] Error reading totcts from fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Nov 24 09:13:41 2011] Calculating source flux in energy range 0.30-8.00
[Thu Nov 24 09:13:41 2011] Using photon index=1.80, rate=0.0125, arf fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src6.arf
[Thu Nov 24 09:13:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Nov 24 09:13:41 2011] Updating source flux to 2.8e-13