[Wed Nov 23 22:17:41 2011] Detection parameters: Position = (289.3, 245.3) = 8 21 52.57 1 10 28.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 34.1 +/- 9.0 Background counts = 8.6 Rate = 0.003 +/- 0.0008 [Wed Nov 23 22:17:41 2011] Off-axis axis estimate = 3.91' [Wed Nov 23 23:34:26 2011] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting [Wed Nov 23 23:34:26 2011] Initial guess for spatial extent in simple fitting = 8.38" [Wed Nov 23 23:34:26 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.061 [Wed Nov 23 23:34:26 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 8.38" [Thu Nov 24 00:54:23 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_src31.ximg exists [Thu Nov 24 00:54:23 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_src31_1.ximg exists [Thu Nov 24 00:54:23 2011] Fit fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_src31 appears to have run properly [Thu Nov 24 00:54:24 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Thu Nov 24 00:54:24 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Thu Nov 24 00:54:24 2011] Fit fullrun_mos1_xmm0201903601_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly [Thu Nov 24 02:19:02 2011] Spatial fit model total counts = 369.326000, observed total counts = 368.000000 [Thu Nov 24 02:19:02 2011] Offset between fit and detection position for source 31 = 0.919247 pixels [Thu Nov 24 02:19:02 2011] Warning, changing simple spatial fit ID from 31 to 18 [Thu Nov 24 02:19:02 2011] 383.029900 total counts/ 309.995000 bgd. counts: snr = 4.148137 Spatial fit parameters: Offset between fit and detection position for source 31 = 0.919247 pixels Position = (288.6, 244.8) = 8 21 52.78 1 10 28.7 Extent = 16.3 (16.0-32.7)", rotation angle = 0 Source counts = 73.0 +/- 19.6 Background counts = 310.0 Rate = 0.006 +/- 0.002 [Thu Nov 24 02:19:02 2011] Vigneting correction estimate = 1.000000 [Thu Nov 24 02:19:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Nov 24 02:19:02 2011] Assessing source extent using major axis lower bound [Thu Nov 24 02:19:02 2011] Source does appear to be extended [Thu Nov 24 02:19:02 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Nov 24 02:19:02 2011] Source is confused with source 30 [Thu Nov 24 03:52:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Nov 24 03:52:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Nov 24 03:52:43 2011] Initial guess for spatial extent in simple fitting = 16.34" [Thu Nov 24 03:52:43 2011] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.994 [Thu Nov 24 03:52:43 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 16.34" [Thu Nov 24 05:05:44 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src25.ximg exists [Thu Nov 24 05:05:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src25.csv [Thu Nov 24 05:05:44 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src25_1.ximg exists [Thu Nov 24 05:05:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src25.csv [Thu Nov 24 05:05:44 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src25_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Nov 24 05:05:44 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Thu Nov 24 05:05:44 2011] fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Thu Nov 24 05:05:44 2011] Fit fullrun_mos1_xmm0201903601_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly [Thu Nov 24 06:13:56 2011] Spatial fit model total counts = 368.171000, observed total counts = 368.000000 [Thu Nov 24 06:13:56 2011] Offset between fit and detection position for source 31 = 0.178509 pixels [Thu Nov 24 06:13:56 2011] Warning, changing simple spatial fit ID from 25 to 16 [Thu Nov 24 06:13:56 2011] 375.572400 total counts/ 301.984000 bgd. counts: snr = 4.234649 Spatial fit parameters: Offset between fit and detection position for source 31 = 0.178509 pixels Position = (288.4, 244.9) = 8 21 52.83 1 10 29.0 Extent = 16.3 (16.3-32.7)", rotation angle = 0 Source counts = 73.6 +/- 19.4 Background counts = 302.0 Rate = 0.006 +/- 0.002 [Thu Nov 24 06:13:56 2011] Vigneting correction estimate = 1.000000 [Thu Nov 24 06:13:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Nov 24 06:13:56 2011] Assessing source extent using major axis lower bound [Thu Nov 24 06:13:56 2011] Source does appear to be extended [Thu Nov 24 06:13:56 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Nov 24 07:58:56 2011] XMMSAS src. selection expression = ellipse(25045.890200, 21254.688000, 980.340028, 980.340028, 0.000000, X, Y) [Thu Nov 24 07:58:56 2011] Writing source region out to fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src31_src.reg [Thu Nov 24 07:58:56 2011] Extracting stamp from image fullrun_mos1_xmm0201903601_pi300-10000_cl_sm2.00.img.gz, (232, 189) - (345, 301) [Thu Nov 24 07:58:56 2011] XMMSAS bgd. selection expression = annulus(25045.890200, 21254.688000, 1633.900047, 3267.800094, X, Y) && !ellipse(25661.420600, 22866.021400, 1030.832030, 697.792020, 318.052936, X, Y) && !ellipse(23130.922000, 21818.480000, 675.665619, 675.665619, 0.000000, X, Y) && !ellipse(25629.038200, 22807.446000, 695.451220, 695.451220, 0.000000, X, Y) && !ellipse(26915.253540, 18002.651600, 220.292806, 220.292806, 0.000000, X, Y) && !ellipse(24917.789215, 22569.139679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25721.392242, 22096.630753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26737.238312, 22392.851044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26627.983856, 23873.120148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25212.685974, 21796.759796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26521.126892, 23028.340271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25216.803925, 23609.552734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22719.314000, 20700.028000, 1393.144040, 1393.144040, 0.000000, X, Y) && !ellipse(26067.663818, 24291.303192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27452.896360, 18911.891800, 297.309609, 297.309609, 0.000000, X, Y) && !ellipse(24289.816000, 22029.862000, 1261.368036, 1261.368036, 0.000000, X, Y) && !ellipse(26916.256317, 23442.240753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27531.694763, 25142.842773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28509.932343, 25242.985168, 870.000000, 870.000000, 0.000000, X, Y) [Thu Nov 24 07:58:56 2011] Writing fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src31.gif [Thu Nov 24 08:03:28 2011] Mean detx,y = (2629.37, 919.33) [Thu Nov 24 08:03:29 2011] Setting backscal keywords in source and bgd. spectrum [Thu Nov 24 08:03:42 2011] Binned source spectrum to 10 counts/bin [Thu Nov 24 08:03:42 2011] Setting source spectrum file to fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Thu Nov 24 08:03:42 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src31_bgd.pi.gz [Thu Nov 24 08:15:35 2011] Not generating rmf since there are only 73 counts [Thu Nov 24 08:15:35 2011] rmf not generated due to insufficient counts [Thu Nov 24 09:13:41 2011] Updating aperture counts using extracted products [Thu Nov 24 09:13:41 2011] Error reading totcts from fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Thu Nov 24 09:13:42 2011] Calculating source flux in energy range 0.30-8.00 [Thu Nov 24 09:13:42 2011] Using photon index=1.80, rate=0.00631, arf fullrun_mos1_xmm0201903601_pi300-10000_pass1_cl_src31.arf [Thu Nov 24 09:13:42 2011] Assuming count rate is from the 0.30-10.00 bandpass [Thu Nov 24 09:13:42 2011] Updating source flux to 5.9e-14 [Thu Nov 24 09:13:44 2011] Flag c found in src. 31 procflags, skipping spectral fitting [Thu Nov 24 09:13:44 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting