[Sat Dec 24 22:34:28 2011] Detection parameters:
  Position = (305.2, 341.2) = 9 58 20.74 -11 2 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.2 +/- 19.2
  Background counts = 57.4
  Rate = 0.02 +/- 0.002

[Sat Dec 24 22:34:30 2011] Off-axis axis estimate = 3.14'
[Sat Dec 24 22:37:52 2011] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 22:37:52 2011] Initial guess for spatial extent in simple fitting = 8.00"
[Sat Dec 24 22:37:52 2011] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.005
[Sat Dec 24 22:37:52 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 8.00"
[Sun Dec 25 00:11:45 2011] fullrun_pn_xmm0201903501_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 25 00:11:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903501_pi300-10000_cl_pass0_src3.csv
[Sun Dec 25 00:11:45 2011] fullrun_pn_xmm0201903501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 25 00:11:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903501_pi300-10000_cl_pass0_src3.csv
[Sun Dec 25 00:11:45 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 00:11:45 2011] fullrun_pn_xmm0201903501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 25 00:11:45 2011] fullrun_pn_xmm0201903501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 25 00:11:45 2011] Fit fullrun_pn_xmm0201903501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 25 04:27:55 2011] Spatial fit model total counts = 836.235000, observed total counts = 831.000000
[Sun Dec 25 04:27:55 2011] Offset between fit and detection position for source 3 = 3.239605 pixels
[Sun Dec 25 04:27:55 2011] 838.309000 total counts/ 733.328000 bgd. counts: snr = 3.876694
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.239605 pixels
  Position = (302.0, 341.0) = 9 58 21.70 -11 2 10.2
  Extent = 9.2 (6.8-12.8)", rotation angle = 0
  Source counts = 105.0 +/- 29.0
  Background counts = 733.3
  Rate = 0.01 +/- 0.004
[Sun Dec 25 04:27:55 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 04:27:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 04:27:55 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 04:27:55 2011] Source does appear to be extended
[Sun Dec 25 04:27:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 04:28:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 04:28:27 2011] Initial guess for spatial extent in simple fitting = 9.24"
[Sun Dec 25 04:28:27 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.089
[Sun Dec 25 04:28:27 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.24"
[Sun Dec 25 06:23:50 2011] fullrun_pn_xmm0201903501_pi300-10000_cl_pass1_src3.ximg exists
[Sun Dec 25 06:23:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903501_pi300-10000_cl_pass1_src3.csv
[Sun Dec 25 06:23:50 2011] fullrun_pn_xmm0201903501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Dec 25 06:23:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903501_pi300-10000_cl_pass1_src3.csv
[Sun Dec 25 06:23:50 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 06:23:50 2011] fullrun_pn_xmm0201903501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Dec 25 06:23:50 2011] fullrun_pn_xmm0201903501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Dec 25 06:23:50 2011] Fit fullrun_pn_xmm0201903501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Dec 25 08:25:01 2011] Spatial fit model total counts = 782.471000, observed total counts = 781.000000
[Sun Dec 25 08:25:01 2011] Offset between fit and detection position for source 3 = 0.131926 pixels
[Sun Dec 25 08:25:01 2011] 757.317000 total counts/ 645.240000 bgd. counts: snr = 4.412207
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.131926 pixels
  Position = (302.0, 341.2) = 9 58 21.69 -11 2 9.6
  Extent = 9.4 (7.1-12.0)", rotation angle = 0
  Source counts = 112.1 +/- 27.5
  Background counts = 645.2
  Rate = 0.01 +/- 0.004
[Sun Dec 25 08:25:01 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 08:25:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 08:25:01 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 08:25:01 2011] Source does appear to be extended
[Sun Dec 25 08:25:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 08:25:01 2011] Source is confused with source 14
[Sun Dec 25 08:25:21 2011] XMMSAS src. selection expression = ellipse(26225.426596, 29633.261600, 565.685416, 565.685416, 0.000000, X, Y)
[Sun Dec 25 08:25:21 2011] Writing source region out to fullrun_pn_xmm0201903501_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 25 08:25:21 2011] Extracting stamp from image fullrun_pn_xmm0201903501_pi300-10000_cl_sm2.00.img.gz, (269, 309) - (335, 374)
[Sun Dec 25 08:25:21 2011] XMMSAS bgd. selection expression = annulus(26225.426596, 29633.261600, 942.809027, 1885.618054, X, Y) && !ellipse(26079.887040, 27638.678800, 1576.504045, 1576.504045, 0.000000, X, Y) && !ellipse(25436.423800, 29076.695800, 1232.040035, 1232.040035, 0.000000, X, Y) && !ellipse(27876.691925, 30289.261292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.658000, 30628.546000, 1309.832038, 1309.832038, 0.000000, X, Y) && !ellipse(26849.904000, 30205.810800, 1294.528037, 1294.528037, 0.000000, X, Y) && !ellipse(25284.647888, 29341.861877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28339.908000, 29715.814000, 1288.520037, 1288.520037, 0.000000, X, Y) && !ellipse(24478.665955, 29216.204651, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 25 08:25:21 2011] Writing fullrun_pn_xmm0201903501_pi300-10000_pass1_cl_src3.gif
[Sun Dec 25 08:48:07 2011] Mean detx,y = (1118.39, -1615.96) 
[Sun Dec 25 08:48:11 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 25 08:48:38 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 25 08:48:38 2011] Setting source spectrum file to fullrun_pn_xmm0201903501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 25 08:48:38 2011] Setting bgd. spectrum file to fullrun_pn_xmm0201903501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Dec 26 05:51:31 2011] Updating aperture counts using extracted products
[Mon Dec 26 05:51:31 2011] Error reading totcts from fullrun_pn_xmm0201903501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Dec 26 05:51:32 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 05:51:32 2011] Using photon index=1.80, rate=0.015, arf fullrun_pn_xmm0201903501_pi300-10000_pass1_cl_src3.arf
[Mon Dec 26 05:51:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 05:51:32 2011] Updating source flux to 3.9e-14
[Mon Dec 26 05:53:32 2011] Flag c found in src. 3 procflags, skipping spectral fitting