[Wed May 1 00:51:40 2013] Detection parameters: Position = (275.6, 337.6) = 6 45 30.72 -54 11 27.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 100.4 +/- 24.6 Background counts = 194.0 Rate = 0.007 +/- 0.002 [Wed May 1 00:51:41 2013] Off-axis axis estimate = 3.28' [Wed May 1 00:53:10 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting [Wed May 1 00:53:10 2013] Initial guess for spatial extent in simple fitting = 8.07" [Wed May 1 00:53:10 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.127 [Wed May 1 00:53:10 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.07" [Wed May 1 01:26:30 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src5.ximg exists [Wed May 1 01:26:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src5.csv [Wed May 1 01:26:30 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src5_1.ximg exists [Wed May 1 01:26:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src5.csv [Wed May 1 01:26:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 01:26:31 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Wed May 1 01:26:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src5.csv [Wed May 1 01:26:31 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Wed May 1 01:26:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src5.csv [Wed May 1 01:26:31 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 02:50:51 2013] Source 5 is offset by 3.338819 and 5.998382 pixels which is larger than 2 X fitted extent = 0.927655 x 2.417392, not incorporating fit results [Wed May 1 02:50:51 2013] Vigneting correction estimate = 1.000000 [Wed May 1 02:50:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 02:50:51 2013] Assessing source extent using major [Wed May 1 02:50:51 2013] Source does appear to be extended [Wed May 1 02:50:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 02:51:06 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting [Wed May 1 02:51:06 2013] Initial guess for spatial extent in simple fitting = 8.07" [Wed May 1 02:51:06 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.127 [Wed May 1 02:51:06 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.07" [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src5.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src5.csv [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src5_1.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src5.csv [Wed May 1 03:26:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5.csv [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5.csv [Wed May 1 03:26:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:48:48 2013] Source 5 is offset by 3.344374 and 5.998382 pixels which is larger than 2 X fitted extent = 0.938938 x 2.136248, not incorporating fit results [Wed May 1 04:48:48 2013] Vigneting correction estimate = 1.000000 [Wed May 1 04:48:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 04:48:48 2013] Assessing source extent using major [Wed May 1 04:48:48 2013] Source does appear to be extended [Wed May 1 04:48:48 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 04:49:03 2013] XMMSAS src. selection expression = ellipse(23931.740540, 29320.709259, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 1 04:49:03 2013] Writing source region out to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src5_src.reg [Wed May 1 04:49:03 2013] Extracting stamp from image fullrun_pn_xmm0201903401_pi300-10000_cl_sm2.00.img.gz, (238, 300) - (313, 375) [Wed May 1 04:49:03 2013] XMMSAS bgd. selection expression = annulus(23931.740540, 29320.709259, 1087.500000, 2175.000000, X, Y) && !ellipse(24208.353000, 26386.741800, 1146.328033, 1146.328033, 0.000000, X, Y) && !ellipse(23046.030731, 29258.621399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21960.345444, 28828.626129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22870.865173, 28402.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25527.528000, 28540.918000, 1180.128034, 1180.128034, 0.000000, X, Y) && !ellipse(22316.946411, 28046.077484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21989.229507, 27189.291565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23044.265137, 26665.334808, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 1 04:49:03 2013] Writing fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src5.gif [Wed May 1 04:53:01 2013] Mean detx,y = (2250.52, -492.90) [Wed May 1 04:53:02 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 04:53:19 2013] Binned source spectrum to 10 counts/bin [Wed May 1 04:53:19 2013] Setting source spectrum file to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Wed May 1 04:53:19 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src5_bgd.pi.gz [Wed May 1 06:25:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 1 06:25:27 2013] rmf not generated due to insufficient counts [Wed May 1 07:26:35 2013] Updating aperture counts using extracted products [Wed May 1 07:26:35 2013] Total counts from fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 925.00 [Wed May 1 07:26:35 2013] Total counts from fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 2948.00 [Wed May 1 07:26:35 2013] Got source and background scale factors 1220272.000000, 4020458.000000 [Wed May 1 07:26:35 2013] User source parameters: Position = (275.6, 337.6) = 6 45 30.72 -54 11 27.0 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 30.2 +/- 31.4 Background aperture counts = 894.8 Rate = 0.003 +/- 0.003 [Wed May 1 07:26:35 2013] Updating counts from extracted products [Wed May 1 07:26:35 2013] Set source signif. to 30.24/29.91 = 1.01 [Wed May 1 07:26:39 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 07:26:39 2013] Using photon index=1.80, rate=0.00281, arf fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src5.arf [Wed May 1 07:26:39 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 07:26:39 2013] Updating source flux to 7.9e-15 [Wed May 1 07:26:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 07:26:52 2013] xmm0201903401/analysis//spectral/fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete