[Wed May  1 00:51:40 2013] Detection parameters:
  Position = (278.9, 304.0) = 6 45 29.10 -54 13 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4760.3 +/- 88.7
  Background counts = 221.6
  Rate = 0.3 +/- 0.006

[Wed May  1 00:51:41 2013] Off-axis axis estimate = 1.47'
[Wed May  1 00:53:10 2013] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Wed May  1 00:53:10 2013] Initial guess for spatial extent in simple fitting = 7.16"
[Wed May  1 00:53:10 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.868
[Wed May  1 00:53:10 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.16"
[Wed May  1 01:26:30 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src2.ximg exists
[Wed May  1 01:26:30 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May  1 01:26:30 2013] Fit fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed May  1 01:26:31 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May  1 01:26:31 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May  1 01:26:31 2013] Fit fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed May  1 02:50:51 2013] Spatial fit model total counts = 11259.800000, observed total counts = 10888.000000
[Wed May  1 02:50:51 2013] Offset between fit and detection position for source 2 = 0.202794 pixels
[Wed May  1 02:50:51 2013] 11315.420000 total counts/ 8004.510000 bgd. counts: snr = 37.006669
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.202794 pixels
  Position = (278.8, 303.9) = 6 45 29.15 -54 13 44.8
  Extent = 14.3 (14.3-28.7)", rotation angle = 0
  Source counts = 3310.9 +/- 106.4
  Background counts = 8004.5
  Rate = 0.3 +/- 0.01
[Wed May  1 02:50:51 2013] Vigneting correction estimate = 1.000000
[Wed May  1 02:50:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 02:50:51 2013] Assessing source extent using major axis lower bound
[Wed May  1 02:50:51 2013] Source does appear to be extended
[Wed May  1 02:50:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 02:51:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 02:51:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 02:51:06 2013] Initial guess for spatial extent in simple fitting = 14.33"
[Wed May  1 02:51:06 2013] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.112
[Wed May  1 02:51:06 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 14.33"
[Wed May  1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src2.ximg exists
[Wed May  1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src2.csv
[Wed May  1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May  1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src2.csv
[Wed May  1 03:26:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May  1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May  1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May  1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May  1 03:26:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 04:48:48 2013] Warning, spatial fit 2 centroid is now closest to src. 17
[Wed May  1 04:48:48 2013] Vigneting correction estimate = 1.000000
[Wed May  1 04:48:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 04:48:48 2013] Assessing source extent using major axis lower bound
[Wed May  1 04:48:48 2013] Source does appear to be extended
[Wed May  1 04:48:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 04:49:02 2013] Counts = 3310.910000, rescaling region sizes by 2.000000
[Wed May  1 04:49:02 2013] XMMSAS src. selection expression = ellipse(24208.353000, 26386.741800, 1719.492049, 1719.492049, 0.000000, X, Y)
[Wed May  1 04:49:02 2013] Writing source region out to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src2_src.reg
[Wed May  1 04:49:02 2013] Extracting stamp from image fullrun_pn_xmm0201903401_pi300-10000_cl_sm2.00.img.gz, (180, 205) - (378, 403)
[Wed May  1 04:49:03 2013] XMMSAS bgd. selection expression = annulus(24208.353000, 26386.741800, 5731.640165, 11463.280330, X, Y) && !ellipse(18137.763200, 16544.025000, 592.820017, 280.388808, 17.464500, X, Y) && !ellipse(19786.245499, 37380.361328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22324.991160, 33449.656000, 399.217611, 399.217611, 0.000000, X, Y) && !ellipse(23931.740540, 29320.709259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23046.030731, 29258.621399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21960.345444, 28828.626129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22870.865173, 28402.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25527.528000, 28540.918000, 1180.128034, 1180.128034, 0.000000, X, Y) && !ellipse(22316.946411, 28046.077484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21989.229507, 27189.291565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30645.686400, 26913.589180, 442.092813, 442.092813, 0.000000, X, Y) && !ellipse(26534.115400, 26647.575900, 417.361612, 417.361612, 0.000000, X, Y) && !ellipse(26461.813538, 25773.244965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23044.265137, 26665.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26331.849854, 25358.871887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22666.658905, 25309.769775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27198.390350, 22715.662781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17877.360180, 21765.134600, 368.183129, 368.183129, 0.000000, X, Y) && !ellipse(19225.721024, 20068.386169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20182.057266, 19968.073853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22067.353745, 16615.946701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22604.600250, 16603.583557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19610.121300, 15357.564200, 585.423217, 347.111210, 13.593308, X, Y)
[Wed May  1 04:49:03 2013] Writing fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src2.gif
[Wed May  1 04:49:26 2013] Mean detx,y = (-443.52, -168.05) 
[Wed May  1 04:49:28 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 04:52:11 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 04:52:12 2013] Setting source spectrum file to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May  1 04:52:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May  1 07:26:34 2013] Updating aperture counts using extracted products
[Wed May  1 07:26:34 2013] Total counts from fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 24370.00
[Wed May  1 07:26:34 2013] Total counts from fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 43500.00
[Wed May  1 07:26:34 2013] Got source and background scale factors 8232135.000000, 268173950.000000
[Wed May  1 07:26:34 2013] User source parameters:
  Position = (278.8, 303.9) = 6 45 29.15 -54 13 44.8
  Extent = 14.3 (14.3-28.7)", rotation angle = 0
  Source aperture counts = 23034.7 +/- 157.1
  Background aperture counts = 1335.3
  Rate = 2 +/- 0.01

[Wed May  1 07:26:39 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 07:26:39 2013] Using photon index=1.80, rate=0.308, arf fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src2.arf
[Wed May  1 07:26:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 07:26:39 2013] Updating source flux to 7.9e-13
[Wed May  1 07:26:52 2013] xmm0201903401/analysis//spectral/fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete