[Wed May 1 00:51:40 2013] Detection parameters: Position = (261.1, 291.5) = 6 45 37.95 -54 14 40.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 114.6 +/- 22.2 Background counts = 187.3 Rate = 0.009 +/- 0.002 [Wed May 1 00:51:41 2013] Off-axis axis estimate = 2.75' [Wed May 1 00:53:10 2013] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting [Wed May 1 00:53:10 2013] Initial guess for spatial extent in simple fitting = 7.81" [Wed May 1 00:53:10 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.950 [Wed May 1 00:53:10 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.81" [Wed May 1 01:26:31 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src17.ximg exists [Wed May 1 01:26:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src17.csv [Wed May 1 01:26:31 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src17_1.ximg exists [Wed May 1 01:26:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src17.csv [Wed May 1 01:26:31 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 01:26:32 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Wed May 1 01:26:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src17.csv [Wed May 1 01:26:32 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Wed May 1 01:26:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src17.csv [Wed May 1 01:26:32 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 02:50:51 2013] Source 17 is offset by -7.083760 and 6.651905 pixels which is larger than 2 X fitted extent = 0.897195 x 0.897195, not incorporating fit results [Wed May 1 02:50:51 2013] Vigneting correction estimate = 1.000000 [Wed May 1 02:50:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 02:50:51 2013] Assessing source extent using major [Wed May 1 02:50:51 2013] Source does appear to be extended [Wed May 1 02:50:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 02:51:06 2013] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting [Wed May 1 02:51:06 2013] Initial guess for spatial extent in simple fitting = 7.81" [Wed May 1 02:51:06 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.950 [Wed May 1 02:51:06 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.81" [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src17.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src17.csv [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src17_1.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src17.csv [Wed May 1 03:26:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src17.csv [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src17.csv [Wed May 1 03:26:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:48:48 2013] Source 17 is offset by -3.730036 and 0.650549 pixels which is larger than 2 X fitted extent = 1.647025 x 1.647025, not incorporating fit results [Wed May 1 04:48:48 2013] Source 17 is offset by -3.050932 and -7.068278 pixels which is larger than 2 X fitted extent = 2.323366 x 0.897195, not incorporating fit results [Wed May 1 04:48:48 2013] Vigneting correction estimate = 1.000000 [Wed May 1 04:48:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 04:48:48 2013] Assessing source extent using major [Wed May 1 04:48:48 2013] Source does appear to be extended [Wed May 1 04:48:48 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 04:49:03 2013] XMMSAS src. selection expression = ellipse(22666.658905, 25309.769775, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 1 04:49:03 2013] Writing source region out to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src17_src.reg [Wed May 1 04:49:03 2013] Extracting stamp from image fullrun_pn_xmm0201903401_pi300-10000_cl_sm2.00.img.gz, (224, 254) - (299, 329) [Wed May 1 04:49:03 2013] XMMSAS bgd. selection expression = annulus(22666.658905, 25309.769775, 1087.500000, 2175.000000, X, Y) && !ellipse(24208.353000, 26386.741800, 1146.328033, 1146.328033, 0.000000, X, Y) && !ellipse(25527.528000, 28540.918000, 1180.128034, 1180.128034, 0.000000, X, Y) && !ellipse(22316.946411, 28046.077484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21989.229507, 27189.291565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23044.265137, 26665.334808, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 1 04:49:03 2013] Writing fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src17.gif [Wed May 1 04:57:56 2013] Mean detx,y = (-1548.50, -1738.61) [Wed May 1 04:57:58 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 04:58:15 2013] Binned source spectrum to 10 counts/bin [Wed May 1 04:58:15 2013] Setting source spectrum file to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src17_src_b10.pi.gz [Wed May 1 04:58:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src17_bgd.pi.gz [Wed May 1 06:44:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 1 06:44:11 2013] rmf not generated due to insufficient counts [Wed May 1 07:26:37 2013] Updating aperture counts using extracted products [Wed May 1 07:26:37 2013] Total counts from fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 896.00 [Wed May 1 07:26:37 2013] Total counts from fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src17_bgd.pi.gz = 2368.00 [Wed May 1 07:26:37 2013] Got source and background scale factors 1118318.000000, 5163149.000000 [Wed May 1 07:26:37 2013] User source parameters: Position = (261.1, 291.5) = 6 45 37.95 -54 14 40.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 383.1 +/- 30.9 Background aperture counts = 512.9 Rate = 0.04 +/- 0.003 [Wed May 1 07:26:37 2013] Updating counts from extracted products [Wed May 1 07:26:37 2013] Set source signif. to 383.10/22.65 = 16.92 [Wed May 1 07:26:39 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 07:26:39 2013] Using photon index=1.80, rate=0.0356, arf fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src17.arf [Wed May 1 07:26:39 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 07:26:39 2013] Updating source flux to 1.2e-13 [Wed May 1 07:26:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 07:26:52 2013] xmm0201903401/analysis//spectral/fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete