[Wed May 1 00:51:40 2013] Detection parameters: Position = (257.1, 322.9) = 6 45 39.93 -54 12 28.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 367.2 +/- 30.1 Background counts = 195.6 Rate = 0.03 +/- 0.002 [Wed May 1 00:51:41 2013] Off-axis axis estimate = 3.48' [Wed May 1 00:53:10 2013] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting [Wed May 1 00:53:10 2013] Initial guess for spatial extent in simple fitting = 8.17" [Wed May 1 00:53:10 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.707 [Wed May 1 00:53:10 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 8.17" [Wed May 1 01:26:31 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src10.ximg exists [Wed May 1 01:26:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src10.csv [Wed May 1 01:26:31 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src10_1.ximg exists [Wed May 1 01:26:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src10.csv [Wed May 1 01:26:31 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 01:26:32 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Wed May 1 01:26:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src10.csv [Wed May 1 01:26:32 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Wed May 1 01:26:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src10.csv [Wed May 1 01:26:32 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 02:50:51 2013] Warning, spatial fit 10 centroid is now closest to src. 11 [Wed May 1 02:50:51 2013] Spatial fit model total counts = 1857.720000, observed total counts = 1475.000000 [Wed May 1 02:50:51 2013] Poor agreement between spatial fit and data for source 10 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 1 02:50:51 2013] Vigneting correction estimate = 1.000000 [Wed May 1 02:50:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 02:50:51 2013] Assessing source extent using major [Wed May 1 02:50:51 2013] Source does appear to be extended [Wed May 1 02:50:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 02:51:06 2013] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting [Wed May 1 02:51:06 2013] Initial guess for spatial extent in simple fitting = 8.17" [Wed May 1 02:51:06 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.707 [Wed May 1 02:51:06 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.17" [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src10.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src10.csv [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src10_1.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src10.csv [Wed May 1 03:26:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src10.csv [Wed May 1 03:26:29 2013] fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Wed May 1 03:26:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src10.csv [Wed May 1 03:26:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:48:48 2013] Source 10 is offset by -0.362170 and 5.705994 pixels which is larger than 2 X fitted extent = 2.024529 x 5.645609, not incorporating fit results [Wed May 1 04:48:48 2013] Spatial fit model total counts = 1877.310000, observed total counts = 1475.000000 [Wed May 1 04:48:48 2013] Poor agreement between spatial fit and data for source 10 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 1 04:48:48 2013] Vigneting correction estimate = 1.000000 [Wed May 1 04:48:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 04:48:48 2013] Assessing source extent using major [Wed May 1 04:48:48 2013] Source does appear to be extended [Wed May 1 04:48:48 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 04:49:03 2013] XMMSAS src. selection expression = ellipse(22316.946411, 28046.077484, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 1 04:49:03 2013] Writing source region out to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src10_src.reg [Wed May 1 04:49:03 2013] Extracting stamp from image fullrun_pn_xmm0201903401_pi300-10000_cl_sm2.00.img.gz, (220, 285) - (295, 360) [Wed May 1 04:49:03 2013] XMMSAS bgd. selection expression = annulus(22316.946411, 28046.077484, 1087.500000, 2175.000000, X, Y) && !ellipse(24208.353000, 26386.741800, 1146.328033, 1146.328033, 0.000000, X, Y) && !ellipse(23931.740540, 29320.709259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23046.030731, 29258.621399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21960.345444, 28828.626129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22870.865173, 28402.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25527.528000, 28540.918000, 1180.128034, 1180.128034, 0.000000, X, Y) && !ellipse(21989.229507, 27189.291565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23044.265137, 26665.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22666.658905, 25309.769775, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 1 04:49:03 2013] Writing fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src10.gif [Wed May 1 04:55:31 2013] Mean detx,y = (1154.08, -2077.76) [Wed May 1 04:55:32 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 04:55:42 2013] Binned source spectrum to 10 counts/bin [Wed May 1 04:55:42 2013] Setting source spectrum file to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Wed May 1 04:55:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src10_bgd.pi.gz [Wed May 1 06:38:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 1 06:38:53 2013] rmf not generated due to insufficient counts [Wed May 1 07:26:36 2013] Updating aperture counts using extracted products [Wed May 1 07:26:36 2013] Total counts from fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 1378.00 [Wed May 1 07:26:36 2013] Total counts from fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src10_bgd.pi.gz = 3451.00 [Wed May 1 07:26:36 2013] Got source and background scale factors 1092188.000000, 4281580.000000 [Wed May 1 07:26:36 2013] User source parameters: Position = (257.1, 322.9) = 6 45 39.93 -54 12 28.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 497.7 +/- 38.1 Background aperture counts = 880.3 Rate = 0.05 +/- 0.004 [Wed May 1 07:26:36 2013] Updating counts from extracted products [Wed May 1 07:26:36 2013] Set source signif. to 497.68/29.67 = 16.77 [Wed May 1 07:26:39 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 07:26:39 2013] Using photon index=1.80, rate=0.0463, arf fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src10.arf [Wed May 1 07:26:39 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 07:26:39 2013] Updating source flux to 1.4e-13 [Wed May 1 07:26:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 07:26:52 2013] xmm0201903401/analysis//spectral/fullrun_pn_xmm0201903401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete