[Wed May 1 00:51:44 2013] Detection parameters: Position = (289.9, 322.9) = 6 45 23.65 -54 12 31.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 163.1 +/- 19.5 Background counts = 83.9 Rate = 0.009 +/- 0.001 [Wed May 1 00:51:44 2013] Off-axis axis estimate = 1.88' [Wed May 1 02:23:24 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting [Wed May 1 02:23:24 2013] Initial guess for spatial extent in simple fitting = 7.37" [Wed May 1 02:23:24 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.831 [Wed May 1 02:23:24 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.37" [Wed May 1 02:50:45 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src6.ximg exists [Wed May 1 02:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src6.csv [Wed May 1 02:50:46 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src6_1.ximg exists [Wed May 1 02:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src6.csv [Wed May 1 02:50:46 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 02:50:46 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Wed May 1 02:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src6.csv [Wed May 1 02:50:46 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Wed May 1 02:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src6.csv [Wed May 1 02:50:46 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 02:50:57 2013] Source 9 is offset by 6.902475 and 6.645590 pixels which is larger than 2 X fitted extent = 6.774161 x 6.774161, not incorporating fit results [Wed May 1 02:50:57 2013] Vigneting correction estimate = 1.000000 [Wed May 1 02:50:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 02:50:57 2013] Assessing source extent using major [Wed May 1 02:50:57 2013] Source does appear to be extended [Wed May 1 02:50:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 04:20:19 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting [Wed May 1 04:20:19 2013] Initial guess for spatial extent in simple fitting = 7.37" [Wed May 1 04:20:19 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.831 [Wed May 1 04:20:19 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.37" [Wed May 1 04:48:41 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src5.ximg exists [Wed May 1 04:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src5.csv [Wed May 1 04:48:41 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src5_1.ximg exists [Wed May 1 04:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src5.csv [Wed May 1 04:48:41 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:48:42 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Wed May 1 04:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5.csv [Wed May 1 04:48:42 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Wed May 1 04:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5.csv [Wed May 1 04:48:42 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:48:55 2013] Source 9 is offset by 7.403119 and 6.645590 pixels which is larger than 2 X fitted extent = 6.774161 x 6.774161, not incorporating fit results [Wed May 1 04:48:55 2013] Spatial fit model total counts = 830.101000, observed total counts = 767.000000 [Wed May 1 04:48:55 2013] Offset between fit and detection position for source 9 = 1.409918 pixels [Wed May 1 04:48:55 2013] Warning, changing simple spatial fit ID from 5 to 19 [Wed May 1 04:48:55 2013] 799.460100 total counts/ 723.061000 bgd. counts: snr = 2.841193 Spatial fit parameters: Offset between fit and detection position for source 9 = 1.409918 pixels Position = (290.4, 321.6) = 6 45 23.38 -54 12 27.7 Extent = 14.7 (5.9-29.5)" x 5.1 (2.0-14.3)", rotation angle = 121 (281-0) degrees Source counts = 76.4 +/- 28.3 Background counts = 723.1 Rate = 0.004 +/- 0.002 [Wed May 1 04:48:55 2013] Vigneting correction estimate = 1.000000 [Wed May 1 04:48:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 04:48:55 2013] Assessing source extent using major axis lower bound [Wed May 1 04:48:55 2013] Source does appear to be extended [Wed May 1 04:48:55 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.41 [Wed May 1 04:48:55 2013] Source is confused with source 8 [Wed May 1 07:10:44 2013] XMMSAS src. selection expression = ellipse(25220.592000, 27928.528000, 883.752025, 307.713609, 120.629000, X, Y) [Wed May 1 07:10:44 2013] Writing source region out to fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src9_src.reg [Wed May 1 07:10:44 2013] Extracting stamp from image fullrun_mos2_xmm0201903401_pi300-10000_cl_sm2.00.img.gz, (240, 271) - (341, 372) [Wed May 1 07:10:44 2013] XMMSAS bgd. selection expression = annulus(25220.592000, 27928.528000, 1472.920042, 2945.840085, X, Y) && !ellipse(24233.596400, 26405.040000, 1144.872033, 1144.872033, 0.000000, X, Y) && !ellipse(23608.328766, 28092.861755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22942.290771, 28049.409546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21762.053253, 28037.602631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22190.398422, 28485.426422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.722687, 24872.013855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22311.827515, 29251.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22936.872000, 24582.560000, 1197.880034, 1197.880034, 0.000000, X, Y) && !ellipse(25817.799011, 28159.813629, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 1 07:10:44 2013] Writing fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src9.gif [Wed May 1 07:13:53 2013] Mean detx,y = (-761.29, -909.07) [Wed May 1 07:13:54 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 07:14:02 2013] Binned source spectrum to 10 counts/bin [Wed May 1 07:14:02 2013] Setting source spectrum file to fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Wed May 1 07:14:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src9_bgd.pi.gz [Wed May 1 07:19:45 2013] Not generating rmf since there are only 76 counts [Wed May 1 07:19:45 2013] rmf not generated due to insufficient counts [Wed May 1 07:26:43 2013] Updating aperture counts using extracted products [Wed May 1 07:26:43 2013] Total counts from fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 543.00 [Wed May 1 07:26:43 2013] Total counts from fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src9_bgd.pi.gz = 4764.00 [Wed May 1 07:26:43 2013] Got source and background scale factors 752276.000000, 13892640.000000 [Wed May 1 07:26:43 2013] User source parameters: Position = (290.4, 321.6) = 6 45 23.38 -54 12 27.7 Extent = 14.7 (5.9-29.5)" x 5.1 (2.0-14.3)", rotation angle = 121 (281-0) degrees Source aperture counts = 285.0 +/- 24.3 Background aperture counts = 258.0 Rate = 0.02 +/- 0.001 [Wed May 1 07:26:44 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 07:26:44 2013] Using photon index=1.80, rate=0.00444, arf fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src9.arf [Wed May 1 07:26:44 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 07:26:44 2013] Updating source flux to 6e-14 [Wed May 1 07:26:47 2013] Flag b found in src. 9 procflags, skipping spectral fitting [Wed May 1 07:26:47 2013] Flag c found in src. 9 procflags, skipping spectral fitting [Wed May 1 07:26:47 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting [Wed May 1 07:26:49 2013] xmm0201903401/analysis//spectral/fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete