[Wed May  1 00:51:44 2013] Detection parameters:
  Position = (207.4, 150.1) = 6 46 4.77 -54 24 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.2 +/- 13.1
  Background counts = 20.3
  Rate = 0.005 +/- 0.0006

[Wed May  1 00:51:44 2013] Off-axis axis estimate = 12.62'
[Wed May  1 02:23:24 2013] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Wed May  1 02:23:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 02:23:24 2013] Initial guess for spatial extent in simple fitting = 12.74"
[Wed May  1 02:23:24 2013] source mask rpix=2.9, npix_max = 47, mask sum = 35, frac = 0.745
[Wed May  1 02:23:24 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 12.74"
[Wed May  1 02:50:46 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src14.ximg exists
[Wed May  1 02:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src14.csv
[Wed May  1 02:50:46 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed May  1 02:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src14.csv
[Wed May  1 02:50:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 02:50:46 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed May  1 02:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed May  1 02:50:46 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed May  1 02:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed May  1 02:50:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 02:50:57 2013] Spatial fit model total counts = 238.791000, observed total counts = 154.000000
[Wed May  1 02:50:57 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 02:50:57 2013] Vigneting correction estimate = 1.000000
[Wed May  1 02:50:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 02:50:57 2013] Assessing source extent using major
[Wed May  1 02:50:57 2013] Source does appear to be extended
[Wed May  1 02:50:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 04:20:19 2013] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Wed May  1 04:20:19 2013] Initial guess for spatial extent in simple fitting = 12.74"
[Wed May  1 04:20:19 2013] source mask rpix=2.9, npix_max = 47, mask sum = 35, frac = 0.745
[Wed May  1 04:20:19 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 12.74"
[Wed May  1 04:48:42 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src13.ximg exists
[Wed May  1 04:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src13.csv
[Wed May  1 04:48:42 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May  1 04:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src13.csv
[Wed May  1 04:48:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 04:48:42 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May  1 04:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May  1 04:48:42 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May  1 04:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May  1 04:48:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 04:48:55 2013] Spatial fit model total counts = 238.791000, observed total counts = 154.000000
[Wed May  1 04:48:55 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 04:48:55 2013] Vigneting correction estimate = 1.000000
[Wed May  1 04:48:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 04:48:55 2013] Assessing source extent using major
[Wed May  1 04:48:55 2013] Source does appear to be extended
[Wed May  1 04:48:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 07:10:44 2013] XMMSAS src. selection expression = ellipse(17998.659409, 13008.626099, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  1 07:10:44 2013] Writing source region out to fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src23_src.reg
[Wed May  1 07:10:44 2013] Extracting stamp from image fullrun_mos2_xmm0201903401_pi300-10000_cl_sm2.00.img.gz, (170, 113) - (245, 188)
[Wed May  1 07:10:44 2013] XMMSAS bgd. selection expression = annulus(17998.659409, 13008.626099, 1087.500000, 2175.000000, X, Y)
[Wed May  1 07:10:44 2013] Writing fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src23.gif
[Wed May  1 07:14:55 2013] Mean detx,y = (14173.25, 6027.96) 
[Wed May  1 07:14:56 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 07:15:05 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 07:15:05 2013] Setting source spectrum file to fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May  1 07:15:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed May  1 07:20:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  1 07:20:07 2013] rmf not generated due to insufficient counts
[Wed May  1 07:26:44 2013] Updating aperture counts using extracted products
[Wed May  1 07:26:44 2013] Total counts from fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 130.00
[Wed May  1 07:26:44 2013] Total counts from fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src23_bgd.pi.gz = 292.00
[Wed May  1 07:26:44 2013] Got source and background scale factors 841668.000000, 5709257.000000
[Wed May  1 07:26:44 2013] User source parameters:
  Position = (207.4, 150.1) = 6 46 4.77 -54 24 52.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 87.0 +/- 12.4
  Background aperture counts = 43.0
  Rate = 0.005 +/- 0.0007

[Wed May  1 07:26:44 2013] Updating counts from extracted products
[Wed May  1 07:26:44 2013] Set source signif. to 86.95/6.56 = 13.25
[Wed May  1 07:26:44 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 07:26:44 2013] Using photon index=1.80, rate=0.00505, arf fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src23.arf
[Wed May  1 07:26:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 07:26:44 2013] Updating source flux to 3.1e-13
[Wed May  1 07:26:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  1 07:26:49 2013] xmm0201903401/analysis//spectral/fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete