[Wed May 1 00:51:44 2013] Detection parameters: Position = (264.3, 323.0) = 6 45 36.36 -54 12 26.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 207.9 +/- 22.0 Background counts = 84.4 Rate = 0.01 +/- 0.001 [Wed May 1 00:51:44 2013] Off-axis axis estimate = 3.05' [Wed May 1 02:23:24 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting [Wed May 1 02:23:24 2013] Initial guess for spatial extent in simple fitting = 7.95" [Wed May 1 02:23:24 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.922 [Wed May 1 02:23:24 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.95" [Wed May 1 02:50:45 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src3.ximg exists [Wed May 1 02:50:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src3.csv [Wed May 1 02:50:45 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src3_1.ximg exists [Wed May 1 02:50:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src3.csv [Wed May 1 02:50:45 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 02:50:46 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Wed May 1 02:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src3.csv [Wed May 1 02:50:46 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Wed May 1 02:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src3.csv [Wed May 1 02:50:46 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 02:50:57 2013] Warning, spatial fit 3 centroid is now closest to src. 10 [Wed May 1 02:50:57 2013] Source 11 is offset by 4.383135 and -0.108281 pixels which is larger than 2 X fitted extent = 2.330520 x 2.330520, not incorporating fit results [Wed May 1 02:50:57 2013] Vigneting correction estimate = 1.000000 [Wed May 1 02:50:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 02:50:57 2013] Assessing source extent using major [Wed May 1 02:50:57 2013] Source does appear to be extended [Wed May 1 02:50:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 04:20:19 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting [Wed May 1 04:20:19 2013] Initial guess for spatial extent in simple fitting = 7.95" [Wed May 1 04:20:19 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.922 [Wed May 1 04:20:19 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.95" [Wed May 1 04:48:41 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src3.ximg exists [Wed May 1 04:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src3.csv [Wed May 1 04:48:41 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src3_1.ximg exists [Wed May 1 04:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src3.csv [Wed May 1 04:48:41 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:48:42 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Wed May 1 04:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src3.csv [Wed May 1 04:48:42 2013] fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Wed May 1 04:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src3.csv [Wed May 1 04:48:42 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:48:55 2013] Warning, spatial fit 3 centroid is now closest to src. 10 [Wed May 1 04:48:55 2013] Source 11 is offset by 4.303871 and -0.127476 pixels which is larger than 2 X fitted extent = 2.546304 x 2.546304, not incorporating fit results [Wed May 1 04:48:55 2013] Vigneting correction estimate = 1.000000 [Wed May 1 04:48:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 04:48:55 2013] Assessing source extent using major [Wed May 1 04:48:55 2013] Source does appear to be extended [Wed May 1 04:48:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 07:10:44 2013] XMMSAS src. selection expression = ellipse(22942.290771, 28049.409546, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 1 07:10:44 2013] Writing source region out to fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src11_src.reg [Wed May 1 07:10:44 2013] Extracting stamp from image fullrun_mos2_xmm0201903401_pi300-10000_cl_sm2.00.img.gz, (227, 285) - (302, 360) [Wed May 1 07:10:44 2013] XMMSAS bgd. selection expression = annulus(22942.290771, 28049.409546, 1087.500000, 2175.000000, X, Y) && !ellipse(24233.596400, 26405.040000, 1144.872033, 1144.872033, 0.000000, X, Y) && !ellipse(23608.328766, 28092.861755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25220.592000, 27928.528000, 1178.336034, 410.284812, 120.629000, X, Y) && !ellipse(21762.053253, 28037.602631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22190.398422, 28485.426422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22311.827515, 29251.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25817.799011, 28159.813629, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 1 07:10:44 2013] Writing fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src11.gif [Wed May 1 07:13:33 2013] Mean detx,y = (-940.98, 1320.52) [Wed May 1 07:13:34 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 07:13:39 2013] Binned source spectrum to 10 counts/bin [Wed May 1 07:13:40 2013] Setting source spectrum file to fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Wed May 1 07:13:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src11_bgd.pi.gz [Wed May 1 07:19:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 1 07:19:25 2013] rmf not generated due to insufficient counts [Wed May 1 07:26:43 2013] Updating aperture counts using extracted products [Wed May 1 07:26:43 2013] Total counts from fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 1100.00 [Wed May 1 07:26:43 2013] Total counts from fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src11_bgd.pi.gz = 2519.00 [Wed May 1 07:26:43 2013] Got source and background scale factors 1151300.000000, 4777352.000000 [Wed May 1 07:26:43 2013] User source parameters: Position = (264.3, 323.0) = 6 45 36.36 -54 12 26.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 492.9 +/- 34.2 Background aperture counts = 607.1 Rate = 0.03 +/- 0.002 [Wed May 1 07:26:43 2013] Updating counts from extracted products [Wed May 1 07:26:43 2013] Set source signif. to 492.94/24.64 = 20.01 [Wed May 1 07:26:44 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 07:26:44 2013] Using photon index=1.80, rate=0.0286, arf fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src11.arf [Wed May 1 07:26:44 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 07:26:44 2013] Updating source flux to 3e-13 [Wed May 1 07:26:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 07:26:49 2013] xmm0201903401/analysis//spectral/fullrun_mos2_xmm0201903401_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete