[Wed May  1 00:51:43 2013] Detection parameters:
  Position = (473.6, 300.8) = 6 43 52.52 -54 13 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.9 +/- 10.9
  Background counts = 25.0
  Rate = 0.002 +/- 0.0005

[Wed May  1 00:51:43 2013] Off-axis axis estimate = 12.70'
[Wed May  1 01:26:32 2013] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Wed May  1 01:26:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 01:26:32 2013] Initial guess for spatial extent in simple fitting = 12.78"
[Wed May  1 01:26:32 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.037
[Wed May  1 01:26:32 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 12.78"
[Wed May  1 02:23:24 2013] fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_src32.ximg exists
[Wed May  1 02:23:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_src32.csv
[Wed May  1 02:23:24 2013] fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed May  1 02:23:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_src32.csv
[Wed May  1 02:23:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 02:23:24 2013] fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed May  1 02:23:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed May  1 02:23:24 2013] fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed May  1 02:23:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed May  1 02:23:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201903401_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 02:50:55 2013] Warning, spatial fit 26 centroid is now closest to src. 15
[Wed May  1 02:50:55 2013] Spatial fit model total counts = 154.382000, observed total counts = 128.000000
[Wed May  1 02:50:55 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 02:50:55 2013] Vigneting correction estimate = 1.000000
[Wed May  1 02:50:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 02:50:55 2013] Assessing source extent using major
[Wed May  1 02:50:55 2013] Source does appear to be extended
[Wed May  1 02:50:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 02:50:55 2013] Deleting source due to low Poisson probability 0.9