[Thu Feb 16 22:37:57 2012] Detection parameters:
  Position = (483.0, 288.9) = 23 16 11.66 -73 14 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.5 +/- 28.7
  Background counts = 190.8
  Rate = 0.01 +/- 0.002

[Thu Feb 16 22:38:00 2012] Off-axis axis estimate = 13.40'
[Thu Feb 16 22:44:36 2012] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 22:44:36 2012] Initial guess for spatial extent in simple fitting = 13.13"
[Thu Feb 16 22:44:36 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Thu Feb 16 22:44:36 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 13.13"
[Fri Feb 17 06:32:44 2012] fullrun_pn_xmm0201903201_pi300-10000_cl_pass0_src9.ximg exists
[Fri Feb 17 06:32:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903201_pi300-10000_cl_pass0_src9.csv
[Fri Feb 17 06:32:44 2012] fullrun_pn_xmm0201903201_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Feb 17 06:32:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903201_pi300-10000_cl_pass0_src9.csv
[Fri Feb 17 06:32:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 06:32:47 2012] fullrun_pn_xmm0201903201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Feb 17 06:32:47 2012] fullrun_pn_xmm0201903201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Feb 17 06:32:47 2012] Fit fullrun_pn_xmm0201903201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Feb 17 06:45:35 2012] Warning, spatial fit 9 centroid is now closest to src. 14
[Fri Feb 17 06:45:35 2012] Spatial fit model total counts = 1455.840000, observed total counts = 1506.000000
[Fri Feb 17 06:45:35 2012] Offset between fit and detection position for source 11 = 5.817787 pixels
[Fri Feb 17 06:45:35 2012] Warning, changing simple spatial fit ID from 9 to 43
[Fri Feb 17 06:45:35 2012] 1362.663000 total counts/ 390.453000 bgd. counts: snr = 49.201201
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 5.817787 pixels
  Position = (480.3, 294.1) = 23 16 14.43 -73 14 0.4
  Extent = 25.7 (24.9-51.3)", rotation angle = 0
  Source counts = 972.2 +/- 36.9
  Background counts = 390.5
  Rate = 0.2 +/- 0.008
[Fri Feb 17 06:45:35 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 06:45:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 06:45:35 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 06:45:35 2012] Source does appear to be extended
[Fri Feb 17 06:45:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 06:45:35 2012] Source is confused with source 8
[Fri Feb 17 06:45:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 06:45:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 06:45:49 2012] Initial guess for spatial extent in simple fitting = 25.67"
[Fri Feb 17 06:45:49 2012] source mask rpix=5.9, npix_max = 163, mask sum = 137, frac = 0.836
[Fri Feb 17 06:45:49 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 25.67"
[Fri Feb 17 19:13:42 2012] fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_src9.ximg exists
[Fri Feb 17 19:13:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_src9.csv
[Fri Feb 17 19:13:42 2012] fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Feb 17 19:13:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_src9.csv
[Fri Feb 17 19:13:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 19:13:44 2012] fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Feb 17 19:13:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Feb 17 19:13:44 2012] fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Feb 17 19:13:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Feb 17 19:13:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 19:29:14 2012] Warning, spatial fit 9 centroid is now closest to src. 54
[Fri Feb 17 19:29:14 2012] Source 11 is offset by 4.067655 and -0.688483 pixels which is larger than
2 X fitted extent = 1.533715 x 1.533715, not incorporating fit results
[Fri Feb 17 19:29:14 2012] Source 11 is offset by -6.505701 and -1.110897 pixels which is larger than
2 X fitted extent = 1.475485 x 1.475485, not incorporating fit results
[Fri Feb 17 19:29:14 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 19:29:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 19:29:14 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 19:29:14 2012] Source does appear to be extended
[Fri Feb 17 19:29:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 19:29:29 2012] XMMSAS src. selection expression = ellipse(41737.422000, 25536.566000, 1540.386044, 1540.386044, 0.000000, X, Y)
[Fri Feb 17 19:29:29 2012] Writing source region out to fullrun_pn_xmm0201903201_pi300-10000_pass1_cl_src11_src.reg
[Fri Feb 17 19:29:29 2012] Extracting stamp from image fullrun_pn_xmm0201903201_pi300-10000_cl_sm2.00.img.gz, (392, 206) - (569, 383)
[Fri Feb 17 19:29:29 2012] XMMSAS bgd. selection expression = annulus(41737.422000, 25536.566000, 2567.310074, 5134.620148, X, Y) && !ellipse(41100.413147, 26906.076935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41585.325043, 24682.999664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42449.242371, 24486.569977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42223.152000, 23897.804000, 1613.016046, 1613.016046, 0.000000, X, Y) && !ellipse(42197.672000, 23696.834000, 2101.656060, 2101.656060, 0.000000, X, Y) && !ellipse(41699.321381, 20733.080719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37110.484000, 31594.054000, 1828.784053, 1828.784053, 0.000000, X, Y) && !ellipse(36779.156494, 31020.103241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36217.840000, 30751.110000, 1753.816050, 1753.816050, 0.000000, X, Y) && !ellipse(38051.670060, 30661.193400, 756.539222, 756.539222, 0.000000, X, Y) && !ellipse(35816.153473, 30423.640289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34979.452000, 30417.076000, 1661.888048, 1661.888048, 0.000000, X, Y) && !ellipse(41293.216064, 26123.499084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40809.801605, 24347.603088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40740.936000, 22650.422000, 1920.664055, 1920.664055, 0.000000, X, Y) && !ellipse(42043.520000, 21420.552000, 2136.096061, 1428.872041, 111.272000, X, Y) && !ellipse(36892.953659, 31707.366649, 1672.606892, 1475.456725, 113.168283, X, Y)
[Fri Feb 17 19:29:29 2012] Writing fullrun_pn_xmm0201903201_pi300-10000_pass1_cl_src11.gif
[Fri Feb 17 19:43:45 2012] Mean detx,y = (-10652.50, 13515.17) 
[Fri Feb 17 19:43:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 19:44:47 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 19:44:48 2012] Setting source spectrum file to fullrun_pn_xmm0201903201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Feb 17 19:44:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0201903201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Feb 18 02:12:54 2012] Updating aperture counts using extracted products
[Sat Feb 18 02:12:54 2012] Error reading totcts from fullrun_pn_xmm0201903201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Feb 18 02:12:56 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 02:12:56 2012] Using photon index=1.80, rate=0.224, arf fullrun_pn_xmm0201903201_pi300-10000_pass1_cl_src11.arf
[Sat Feb 18 02:12:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 18 02:12:56 2012] Updating source flux to 1.9e-12
[Sat Feb 18 02:14:02 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Sat Feb 18 02:14:02 2012] Flag c found in src. 11 procflags, skipping spectral fitting