[Tue Jul  3 20:26:23 2012] Detection parameters:
  Position = (243.5, 291.1) = 22 19 8.86 -38 55 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.4 +/- 22.1
  Background counts = 77.2
  Rate = 0.02 +/- 0.001

[Tue Jul  3 20:26:24 2012] Off-axis axis estimate = 4.02'
[Tue Jul  3 20:28:23 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 20:28:23 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Tue Jul  3 20:28:23 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.050
[Tue Jul  3 20:28:23 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.44"
[Tue Jul  3 21:10:21 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src27.ximg exists
[Tue Jul  3 21:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src27.csv
[Tue Jul  3 21:10:21 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Jul  3 21:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src27.csv
[Tue Jul  3 21:10:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 21:10:21 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Jul  3 21:10:21 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Jul  3 21:10:21 2012] Fit fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Jul  3 23:05:03 2012] Source 27 is offset by -7.257823 and 6.819950 pixels which is larger than
2 X fitted extent = 0.969959 x 0.969959, not incorporating fit results
[Tue Jul  3 23:05:03 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:05:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:05:03 2012] Assessing source extent using major
[Tue Jul  3 23:05:03 2012] Source does appear to be extended
[Tue Jul  3 23:05:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 23:05:21 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 23:05:21 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Tue Jul  3 23:05:21 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.050
[Tue Jul  3 23:05:21 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.44"
[Tue Jul  3 23:36:36 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src25.ximg exists
[Tue Jul  3 23:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src25.csv
[Tue Jul  3 23:36:36 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Jul  3 23:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src25.csv
[Tue Jul  3 23:36:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:36:37 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Jul  3 23:36:37 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Jul  3 23:36:37 2012] Fit fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Wed Jul  4 01:04:39 2012] Spatial fit model total counts = 559.003000, observed total counts = 559.000000
[Wed Jul  4 01:04:39 2012] Offset between fit and detection position for source 27 = 0.123887 pixels
[Wed Jul  4 01:04:39 2012] 560.342000 total counts/ 413.859000 bgd. counts: snr = 7.200473
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.123887 pixels
  Position = (243.5, 291.2) = 22 19 8.86 -38 55 3.0
  Extent = 6.0 (5.1-7.5)", rotation angle = 0
  Source counts = 146.5 +/- 23.7
  Background counts = 413.9
  Rate = 0.007 +/- 0.001
[Wed Jul  4 01:04:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 01:04:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 01:04:39 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 01:04:39 2012] Source does appear to be extended
[Wed Jul  4 01:04:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 01:04:53 2012] XMMSAS src. selection expression = ellipse(21135.038000, 25284.486800, 361.264810, 361.264810, 0.000000, X, Y)
[Wed Jul  4 01:04:53 2012] Writing source region out to fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src27_src.reg
[Wed Jul  4 01:04:53 2012] Extracting stamp from image fullrun_pn_xmm0201903001_pi300-10000_cl_sm2.00.img.gz, (223, 270) - (264, 312)
[Wed Jul  4 01:04:53 2012] XMMSAS bgd. selection expression = annulus(21135.038000, 25284.486800, 602.108017, 1204.216035, X, Y)
[Wed Jul  4 01:04:53 2012] Writing fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src27.gif
[Wed Jul  4 01:19:14 2012] Mean detx,y = (-4738.55, 4593.31) 
[Wed Jul  4 01:19:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 01:19:22 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 01:19:23 2012] Setting source spectrum file to fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jul  4 01:19:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Jul  4 05:28:20 2012] Updating aperture counts using extracted products
[Wed Jul  4 05:28:20 2012] Error reading totcts from fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jul  4 05:28:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 05:28:21 2012] Using photon index=1.80, rate=0.00734, arf fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src27.arf
[Wed Jul  4 05:28:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 05:28:21 2012] Updating source flux to 3e-14
[Wed Jul  4 05:30:00 2012] Flag b found in src. 27 procflags, skipping spectral fitting