[Tue Jul  3 20:26:23 2012] Detection parameters:
  Position = (329.2, 319.7) = 22 18 36.93 -38 53 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1597.1 +/- 51.4
  Background counts = 201.4
  Rate = 0.09 +/- 0.003

[Tue Jul  3 20:26:24 2012] Off-axis axis estimate = 2.71'
[Tue Jul  3 20:28:23 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 20:28:23 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Tue Jul  3 20:28:23 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.859
[Tue Jul  3 20:28:23 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.78"
[Tue Jul  3 21:10:21 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jul  3 21:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src2.csv
[Tue Jul  3 21:10:21 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jul  3 21:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src2.csv
[Tue Jul  3 21:10:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 21:10:21 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jul  3 21:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jul  3 21:10:21 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jul  3 21:10:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jul  3 21:10:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:05:03 2012] Warning, spatial fit 2 centroid is now closest to src. 22
[Tue Jul  3 23:05:03 2012] Spatial fit model total counts = 8413.780000, observed total counts = 5588.000000
[Tue Jul  3 23:05:03 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 23:05:03 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:05:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:05:03 2012] Assessing source extent using major
[Tue Jul  3 23:05:03 2012] Source does appear to be extended
[Tue Jul  3 23:05:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 23:05:21 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 23:05:21 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Tue Jul  3 23:05:21 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.859
[Tue Jul  3 23:05:21 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.78"
[Tue Jul  3 23:36:36 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jul  3 23:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src2.csv
[Tue Jul  3 23:36:36 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jul  3 23:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src2.csv
[Tue Jul  3 23:36:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:36:36 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jul  3 23:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jul  3 23:36:36 2012] fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jul  3 23:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jul  3 23:36:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 01:04:39 2012] Spatial fit model total counts = 8651.220000, observed total counts = 5999.000000
[Wed Jul  4 01:04:39 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul  4 01:04:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 01:04:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 01:04:39 2012] Assessing source extent using major
[Wed Jul  4 01:04:39 2012] Source does appear to be extended
[Wed Jul  4 01:04:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 01:04:53 2012] Counts = 1597.103516, rescaling region sizes by 2.000000
[Wed Jul  4 01:04:53 2012] XMMSAS src. selection expression = ellipse(28589.692078, 27764.593933, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul  4 01:04:53 2012] Writing source region out to fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul  4 01:04:53 2012] Extracting stamp from image fullrun_pn_xmm0201903001_pi300-10000_cl_sm2.00.img.gz, (254, 245) - (404, 395)
[Wed Jul  4 01:04:53 2012] XMMSAS bgd. selection expression = annulus(28589.692078, 27764.593933, 4350.000000, 8700.000000, X, Y) && !ellipse(27855.329000, 26608.008200, 1160.352033, 1160.352033, 0.000000, X, Y) && !ellipse(32519.323944, 36653.857697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30435.786600, 27113.512400, 343.216010, 343.216010, 0.000000, X, Y) && !ellipse(24392.958954, 27275.197693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29285.848724, 27349.944733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27869.828674, 18260.145279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28420.290588, 29602.646820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22958.176400, 29591.387000, 482.382975, 482.382975, 0.000000, X, Y) && !ellipse(30417.191223, 29230.087799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29271.946991, 28920.617584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33619.889343, 27093.070648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30063.036000, 24834.764000, 1289.840037, 1289.840037, 0.000000, X, Y) && !ellipse(21135.038000, 25284.486800, 481.686414, 481.686414, 0.000000, X, Y) && !ellipse(25273.241882, 24494.187256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.274933, 24067.709900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27411.966217, 23558.687683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23152.446600, 21799.252200, 417.041149, 417.041149, 0.000000, X, Y)
[Wed Jul  4 01:04:53 2012] Writing fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src2.gif
[Wed Jul  4 01:08:08 2012] Mean detx,y = (252.45, -1216.84) 
[Wed Jul  4 01:08:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 01:10:15 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 01:10:15 2012] Setting source spectrum file to fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul  4 01:10:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul  4 02:56:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul  4 02:56:04 2012] rmf not generated due to insufficient counts
[Wed Jul  4 05:28:20 2012] Updating aperture counts using extracted products
[Wed Jul  4 05:28:20 2012] Error reading totcts from fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul  4 05:28:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 05:28:20 2012] Using photon index=1.80, rate=0.0922, arf fullrun_pn_xmm0201903001_pi300-10000_pass1_cl_src2.arf
[Wed Jul  4 05:28:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 05:28:20 2012] Updating source flux to 2.3e-13
[Wed Jul  4 05:30:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting