[Tue Jul 3 20:26:59 2012] Detection parameters: Position = (321.0, 305.1) = 22 18 39.98 -38 54 2.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1832.4 +/- 53.3 Background counts = 65.9 Rate = 0.07 +/- 0.002 [Tue Jul 3 20:27:00 2012] Off-axis axis estimate = 1.70' [Tue Jul 3 21:52:57 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Tue Jul 3 21:52:57 2012] Initial guess for spatial extent in simple fitting = 7.28" [Tue Jul 3 21:52:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847 [Tue Jul 3 21:52:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28" [Tue Jul 3 23:04:56 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src1.ximg exists [Tue Jul 3 23:04:56 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src1_1.ximg exists [Tue Jul 3 23:04:56 2012] Fit fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src1 appears to have run properly [Tue Jul 3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Tue Jul 3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src1.csv [Tue Jul 3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Tue Jul 3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src1.csv [Tue Jul 3 23:04:57 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jul 3 23:05:12 2012] Warning, spatial fit 1 centroid is now closest to src. 3 [Tue Jul 3 23:05:12 2012] Source 4 is offset by 2.748492 and 1.585671 pixels which is larger than 2 X fitted extent = 2.395246 x 6.477885, not incorporating fit results [Tue Jul 3 23:05:12 2012] Vigneting correction estimate = 1.000000 [Tue Jul 3 23:05:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jul 3 23:05:12 2012] Assessing source extent using major [Tue Jul 3 23:05:12 2012] Source does appear to be extended [Tue Jul 3 23:05:12 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jul 3 23:05:12 2012] Source is confused with source 3 [Tue Jul 3 23:05:12 2012] Source is confused with source 5 [Wed Jul 4 00:11:40 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Wed Jul 4 00:11:40 2012] Initial guess for spatial extent in simple fitting = 7.28" [Wed Jul 4 00:11:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847 [Wed Jul 4 00:11:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28" [Wed Jul 4 01:04:34 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src1.ximg exists [Wed Jul 4 01:04:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src1.csv [Wed Jul 4 01:04:34 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src1_1.ximg exists [Wed Jul 4 01:04:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src1.csv [Wed Jul 4 01:04:34 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jul 4 01:04:35 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed Jul 4 01:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed Jul 4 01:04:35 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed Jul 4 01:04:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed Jul 4 01:04:35 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jul 4 01:04:46 2012] Spatial fit model total counts = 7825.510000, observed total counts = 7107.000000 [Wed Jul 4 01:04:46 2012] Poor agreement between spatial fit and data for source 4 It may help to tweak spatial fit manually Not incorporating fit results [Wed Jul 4 01:04:46 2012] Source 4 is offset by 4.043227 and 3.339073 pixels which is larger than 2 X fitted extent = 2.503683 x 2.503683, not incorporating fit results [Wed Jul 4 01:04:46 2012] Spatial fit model total counts = 10567.000000, observed total counts = 9539.000000 [Wed Jul 4 01:04:46 2012] Poor agreement between spatial fit and data for source 4 It may help to tweak spatial fit manually Not incorporating fit results [Wed Jul 4 01:04:46 2012] Source 4 is offset by 5.352400 and 7.755023 pixels which is larger than 2 X fitted extent = 1.529807 x 1.529807, not incorporating fit results [Wed Jul 4 01:04:46 2012] Vigneting correction estimate = 1.000000 [Wed Jul 4 01:04:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jul 4 01:04:46 2012] Assessing source extent using major [Wed Jul 4 01:04:46 2012] Source does appear to be extended [Wed Jul 4 01:04:46 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jul 4 04:46:35 2012] Counts = 1832.401855, rescaling region sizes by 2.000000 [Wed Jul 4 04:46:35 2012] XMMSAS src. selection expression = ellipse(27876.800781, 26493.185364, 1305.000000, 1305.000000, 0.000000, X, Y) [Wed Jul 4 04:46:35 2012] Writing source region out to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src4_src.reg [Wed Jul 4 04:46:35 2012] Extracting stamp from image fullrun_mos2_xmm0201903001_pi300-10000_cl_sm2.00.img.gz, (246, 230) - (396, 380) [Wed Jul 4 04:46:35 2012] XMMSAS bgd. selection expression = annulus(27876.800781, 26493.185364, 4350.000000, 8700.000000, X, Y) && !ellipse(27180.354736, 26681.400391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28350.996000, 26214.838000, 856.584025, 856.584025, 0.000000, X, Y) && !ellipse(28803.363525, 26557.397247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28147.562000, 27105.106000, 1198.784034, 1198.784034, 0.000000, X, Y) && !ellipse(30425.084000, 27127.464200, 408.937612, 408.937612, 0.000000, X, Y) && !ellipse(24377.447600, 27260.220800, 297.460809, 297.460809, 0.000000, X, Y) && !ellipse(27887.848358, 18155.643326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26390.966736, 24571.228241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30153.951760, 35537.470800, 678.144820, 678.144820, 0.000000, X, Y) && !ellipse(21166.723170, 25302.675654, 458.623274, 312.159044, 94.074334, X, Y) && !ellipse(27258.362000, 27715.638000, 1195.728034, 1195.728034, 0.000000, X, Y) && !ellipse(25973.236000, 25640.940000, 1022.392029, 1022.392029, 0.000000, X, Y) && !ellipse(28206.292572, 24414.223083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.252000, 28625.526000, 1302.184037, 1302.184037, 354.027000, X, Y) && !ellipse(33602.100647, 27045.120819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26225.912000, 28882.028000, 1195.728034, 1195.728034, 0.000000, X, Y) && !ellipse(29835.272522, 29209.290955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30594.302917, 26594.506592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30651.978119, 28581.424316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26026.293152, 27349.899597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30959.008362, 27177.227112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.416138, 25023.884186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30271.265503, 25986.595154, 870.000000, 870.000000, 0.000000, X, Y) [Wed Jul 4 04:46:35 2012] Writing fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src4.gif [Wed Jul 4 04:46:39 2012] Mean detx,y = (-107.45, -65.27) [Wed Jul 4 04:46:40 2012] Setting backscal keywords in source and bgd. spectrum [Wed Jul 4 04:48:19 2012] Binned source spectrum to 10 counts/bin [Wed Jul 4 04:48:19 2012] Setting source spectrum file to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Wed Jul 4 04:48:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src4_bgd.pi.gz [Wed Jul 4 04:52:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Jul 4 04:52:55 2012] rmf not generated due to insufficient counts [Wed Jul 4 05:28:21 2012] Updating aperture counts using extracted products [Wed Jul 4 05:28:21 2012] Error reading totcts from fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Wed Jul 4 05:28:21 2012] Calculating source flux in energy range 0.30-8.00 [Wed Jul 4 05:28:21 2012] Using photon index=1.80, rate=0.0691, arf fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src4.arf [Wed Jul 4 05:28:21 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jul 4 05:28:21 2012] Updating source flux to 6.6e-13 [Wed Jul 4 05:28:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jul 4 05:30:00 2012] xmm0201903001/analysis//spectral/fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete