[Tue Jul  3 20:26:59 2012] Detection parameters:
  Position = (292.7, 304.8) = 22 18 50.52 -38 54 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 14.7
  Background counts = 41.1
  Rate = 0.003 +/- 0.0005

[Tue Jul  3 20:27:00 2012] Off-axis axis estimate = 0.62'
[Tue Jul  3 21:52:57 2012] Using EEF radius (= 6.74 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 21:52:57 2012] Initial guess for spatial extent in simple fitting = 6.74"
[Tue Jul  3 21:52:57 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.953
[Tue Jul  3 21:52:57 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 6.74"
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src35.ximg exists
[Tue Jul  3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src35.csv
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Jul  3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src35.csv
[Tue Jul  3 23:04:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Jul  3 23:04:57 2012] Fit fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Jul  3 23:05:12 2012] Source 30 is offset by -6.517247 and 0.049400 pixels which is larger than
2 X fitted extent = 4.437048 x 4.437048, not incorporating fit results
[Tue Jul  3 23:05:12 2012] Spatial fit model total counts = 641.025000, observed total counts = 639.000000
[Tue Jul  3 23:05:12 2012] Offset between fit and detection position for source 30 = 0.498907 pixels
[Tue Jul  3 23:05:12 2012] Warning, changing simple spatial fit ID from 35 to 43
[Tue Jul  3 23:05:12 2012] 643.789000 total counts/ 630.572000 bgd. counts: snr = 0.526339
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.498907 pixels
  Position = (292.6, 305.3) = 22 18 50.57 -38 54 1.9
  Extent = 1.7 (1.7-3.2)", rotation angle = 0
  Source counts = 13.2 +/- 25.4
  Background counts = 630.6
  Rate = 0.0005 +/- 0.0009
  Deleting source due to low Poisson probability