[Tue Jul  3 20:26:59 2012] Detection parameters:
  Position = (326.9, 299.7) = 22 18 37.75 -38 54 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 760.6 +/- 36.2
  Background counts = 65.5
  Rate = 0.03 +/- 0.001

[Tue Jul  3 20:27:00 2012] Off-axis axis estimate = 2.07'
[Tue Jul  3 21:52:57 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 21:52:57 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Jul  3 21:52:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.866
[Tue Jul  3 21:52:57 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.46"
[Tue Jul  3 23:04:56 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul  3 23:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src3.csv
[Tue Jul  3 23:04:56 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul  3 23:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src3.csv
[Tue Jul  3 23:04:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul  3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul  3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul  3 23:04:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:05:12 2012] Spatial fit model total counts = 6689.550000, observed total counts = 7107.000000
[Tue Jul  3 23:05:12 2012] Offset between fit and detection position for source 3 = 2.245586 pixels
[Tue Jul  3 23:05:12 2012] Warning, changing simple spatial fit ID from 3 to 1
[Tue Jul  3 23:05:12 2012] 6716.641000 total counts/ 6329.620000 bgd. counts: snr = 4.864584
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.245586 pixels
  Position = (326.4, 301.9) = 22 18 37.95 -38 54 16.6
  Extent = 10.7" x 10.7", rotation angle = 0
  Source counts = 387.0 +/- 82.0
  Background counts = 6329.6
  Rate = 0.01 +/- 0.003
[Tue Jul  3 23:05:12 2012] Spatial fit model total counts = 5883.440000, observed total counts = 4887.000000
[Tue Jul  3 23:05:12 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 23:05:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:05:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:05:12 2012] Assessing source extent using major
[Tue Jul  3 23:05:12 2012] Source does appear to be extended
[Tue Jul  3 23:05:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 23:05:12 2012] Source is confused with source 4
[Wed Jul  4 00:11:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  4 00:11:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul  4 00:11:40 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Wed Jul  4 00:11:40 2012] source mask rpix=2.5, npix_max = 35, mask sum = 15, frac = 0.428
[Wed Jul  4 00:11:40 2012] Skipping simple spatial due to low active detector fraction
[Wed Jul  4 01:04:46 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 01:04:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 01:04:46 2012] Assessing source extent using major
[Wed Jul  4 01:04:46 2012] Source does appear to be extended
[Wed Jul  4 01:04:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 04:46:35 2012] XMMSAS src. selection expression = ellipse(28350.996000, 26214.838000, 642.438018, 642.438018, 0.000000, X, Y)
[Wed Jul  4 04:46:35 2012] Writing source region out to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src3_src.reg
[Wed Jul  4 04:46:35 2012] Extracting stamp from image fullrun_mos2_xmm0201903001_pi300-10000_cl_sm2.00.img.gz, (290, 265) - (363, 339)
[Wed Jul  4 04:46:35 2012] XMMSAS bgd. selection expression = annulus(28350.996000, 26214.838000, 1070.730031, 2141.460062, X, Y) && !ellipse(27876.800781, 26493.185364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27180.354736, 26681.400391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28803.363525, 26557.397247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28147.562000, 27105.106000, 1198.784034, 1198.784034, 0.000000, X, Y) && !ellipse(30425.084000, 27127.464200, 408.937612, 408.937612, 0.000000, X, Y) && !ellipse(26390.966736, 24571.228241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27258.362000, 27715.638000, 1195.728034, 1195.728034, 0.000000, X, Y) && !ellipse(25973.236000, 25640.940000, 1022.392029, 1022.392029, 0.000000, X, Y) && !ellipse(28206.292572, 24414.223083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.252000, 28625.526000, 1302.184037, 1302.184037, 354.027000, X, Y) && !ellipse(26225.912000, 28882.028000, 1195.728034, 1195.728034, 0.000000, X, Y) && !ellipse(29835.272522, 29209.290955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30594.302917, 26594.506592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30651.978119, 28581.424316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26026.293152, 27349.899597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30959.008362, 27177.227112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.416138, 25023.884186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30271.265503, 25986.595154, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 04:46:35 2012] Writing fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src3.gif
[Wed Jul  4 04:48:29 2012] Mean detx,y = (-581.45, -38.55) 
[Wed Jul  4 04:48:30 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 04:48:36 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 04:48:36 2012] Setting source spectrum file to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul  4 04:48:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jul  4 05:28:21 2012] Updating aperture counts using extracted products
[Wed Jul  4 05:28:21 2012] Error reading totcts from fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jul  4 05:28:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 05:28:21 2012] Using photon index=1.80, rate=0.0138, arf fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src3.arf
[Wed Jul  4 05:28:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 05:28:21 2012] Updating source flux to 1.6e-13
[Wed Jul  4 05:28:52 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Wed Jul  4 05:28:52 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Wed Jul  4 05:30:00 2012] Reading fit data from xmm0201903001/analysis//spectral/fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src3_pl.csv
[Wed Jul  4 05:30:00 2012] Spectral fit parameter nH value = 4.88418e+20
[Wed Jul  4 05:30:00 2012] Spectral fit parameter PhoIndex value = 1.85928
[Wed Jul  4 05:30:00 2012] Failed to get F(0.3-8.0) from xmm0201903001/analysis//spectral/fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Jul  4 05:30:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 05:30:00 2012] Using Nh = 4.9e+20, photon index=1.86, rate=0.0138, arf fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src3.arf
[Wed Jul  4 05:30:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 05:30:00 2012] Updating source flux to 1.7e-13