[Tue Jul  3 20:26:59 2012] Detection parameters:
  Position = (308.2, 317.9) = 22 18 44.75 -38 53 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.3 +/- 19.8
  Background counts = 56.6
  Rate = 0.006 +/- 0.0007

[Tue Jul  3 20:27:00 2012] Off-axis axis estimate = 1.58'
[Tue Jul  3 21:52:57 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 21:52:57 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Tue Jul  3 21:52:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Tue Jul  3 21:52:57 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.22"
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jul  3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src15.csv
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jul  3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src15.csv
[Tue Jul  3 23:04:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jul  3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jul  3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Jul  3 23:04:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:05:12 2012] Warning, spatial fit 15 centroid is now closest to src. 27
[Tue Jul  3 23:05:12 2012] Spatial fit model total counts = 1009.020000, observed total counts = 993.000000
[Tue Jul  3 23:05:12 2012] Offset between fit and detection position for source 26 = 5.836990 pixels
[Tue Jul  3 23:05:12 2012] Warning, changing simple spatial fit ID from 15 to 22
[Tue Jul  3 23:05:12 2012] 998.195800 total counts/ 901.220000 bgd. counts: snr = 3.230338
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 5.836990 pixels
  Position = (313.9, 319.1) = 22 18 42.63 -38 53 1.6
  Extent = 14.9 (14.9-29.9)", rotation angle = 0
  Source counts = 97.0 +/- 31.6
  Background counts = 901.2
  Rate = 0.003 +/- 0.001
[Tue Jul  3 23:05:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:05:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:05:12 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 23:05:12 2012] Source does appear to be extended
[Tue Jul  3 23:05:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 23:05:12 2012] Source is confused with source 44
[Wed Jul  4 00:11:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  4 00:11:40 2012] Initial guess for spatial extent in simple fitting = 14.95"
[Wed Jul  4 00:11:40 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.033
[Wed Jul  4 00:11:40 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 14.95"
[Wed Jul  4 01:04:35 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jul  4 01:04:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src13.csv
[Wed Jul  4 01:04:35 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jul  4 01:04:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src13.csv
[Wed Jul  4 01:04:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 01:04:35 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jul  4 01:04:35 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jul  4 01:04:35 2012] Fit fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Jul  4 01:04:46 2012] Warning, spatial fit 13 centroid is now closest to src. 44
[Wed Jul  4 01:04:46 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 01:04:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 01:04:46 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 01:04:46 2012] Source does appear to be extended
[Wed Jul  4 01:04:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 04:46:35 2012] XMMSAS src. selection expression = ellipse(27258.362000, 27715.638000, 896.796026, 896.796026, 0.000000, X, Y)
[Wed Jul  4 04:46:35 2012] Writing source region out to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src26_src.reg
[Wed Jul  4 04:46:35 2012] Extracting stamp from image fullrun_mos2_xmm0201903001_pi300-10000_cl_sm2.00.img.gz, (262, 268) - (365, 371)
[Wed Jul  4 04:46:35 2012] XMMSAS bgd. selection expression = annulus(27258.362000, 27715.638000, 1494.660043, 2989.320086, X, Y) && !ellipse(27876.800781, 26493.185364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27180.354736, 26681.400391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28350.996000, 26214.838000, 856.584025, 856.584025, 0.000000, X, Y) && !ellipse(28803.363525, 26557.397247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28147.562000, 27105.106000, 1198.784034, 1198.784034, 0.000000, X, Y) && !ellipse(30425.084000, 27127.464200, 408.937612, 408.937612, 0.000000, X, Y) && !ellipse(24377.447600, 27260.220800, 297.460809, 297.460809, 0.000000, X, Y) && !ellipse(26390.966736, 24571.228241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25973.236000, 25640.940000, 1022.392029, 1022.392029, 0.000000, X, Y) && !ellipse(28206.292572, 24414.223083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.252000, 28625.526000, 1302.184037, 1302.184037, 354.027000, X, Y) && !ellipse(26225.912000, 28882.028000, 1195.728034, 1195.728034, 0.000000, X, Y) && !ellipse(29835.272522, 29209.290955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30594.302917, 26594.506592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30651.978119, 28581.424316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26026.293152, 27349.899597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30959.008362, 27177.227112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.416138, 25023.884186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30271.265503, 25986.595154, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 04:46:35 2012] Writing fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src26.gif
[Wed Jul  4 04:50:21 2012] Mean detx,y = (835.74, 542.53) 
[Wed Jul  4 04:50:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 04:50:29 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 04:50:29 2012] Setting source spectrum file to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jul  4 04:50:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Jul  4 05:17:23 2012] Not generating rmf since there are only 96 counts
[Wed Jul  4 05:17:23 2012] rmf not generated due to insufficient counts
[Wed Jul  4 05:28:21 2012] Updating aperture counts using extracted products
[Wed Jul  4 05:28:21 2012] Error reading totcts from fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jul  4 05:28:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 05:28:21 2012] Using photon index=1.80, rate=0.00345, arf fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src26.arf
[Wed Jul  4 05:28:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 05:28:21 2012] Updating source flux to 3.2e-14
[Wed Jul  4 05:28:52 2012] Flag c found in src. 26 procflags, skipping spectral fitting
[Wed Jul  4 05:28:52 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting