[Tue Jul  3 20:26:59 2012] Detection parameters:
  Position = (303.9, 283.0) = 22 18 46.34 -38 55 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.7 +/- 21.0
  Background counts = 44.5
  Rate = 0.008 +/- 0.0008

[Tue Jul  3 20:27:00 2012] Off-axis axis estimate = 1.19'
[Tue Jul  3 21:52:57 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 21:52:57 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Tue Jul  3 21:52:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Tue Jul  3 21:52:57 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.02"
[Tue Jul  3 23:04:56 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jul  3 23:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src10.csv
[Tue Jul  3 23:04:56 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jul  3 23:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src10.csv
[Tue Jul  3 23:04:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jul  3 23:04:57 2012] Fit fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Jul  3 23:05:12 2012] Warning, spatial fit 10 centroid is now closest to src. 14
[Tue Jul  3 23:05:12 2012] Source 15 is offset by 0.459572 and 1.287750 pixels which is larger than
2 X fitted extent = 0.888897 x 0.888897, not incorporating fit results
[Tue Jul  3 23:05:12 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:05:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:05:12 2012] Assessing source extent using major
[Tue Jul  3 23:05:12 2012] Source does appear to be extended
[Tue Jul  3 23:05:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 00:11:40 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 00:11:40 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Wed Jul  4 00:11:40 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Wed Jul  4 00:11:40 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.02"
[Wed Jul  4 01:04:34 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src8.ximg exists
[Wed Jul  4 01:04:34 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Jul  4 01:04:34 2012] Fit fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_src8 appears to have run properly
[Wed Jul  4 01:04:35 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Jul  4 01:04:35 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Jul  4 01:04:35 2012] Fit fullrun_mos2_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Jul  4 01:04:46 2012] Warning, spatial fit 8 centroid is now closest to src. 35
[Wed Jul  4 01:04:46 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 01:04:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 01:04:46 2012] Assessing source extent using major
[Wed Jul  4 01:04:46 2012] Source does appear to be extended
[Wed Jul  4 01:04:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 04:46:35 2012] XMMSAS src. selection expression = ellipse(26390.966736, 24571.228241, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul  4 04:46:35 2012] Writing source region out to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src15_src.reg
[Wed Jul  4 04:46:35 2012] Extracting stamp from image fullrun_mos2_xmm0201903001_pi300-10000_cl_sm2.00.img.gz, (266, 245) - (341, 320)
[Wed Jul  4 04:46:35 2012] XMMSAS bgd. selection expression = annulus(26390.966736, 24571.228241, 1087.500000, 2175.000000, X, Y) && !ellipse(27876.800781, 26493.185364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27180.354736, 26681.400391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28350.996000, 26214.838000, 856.584025, 856.584025, 0.000000, X, Y) && !ellipse(28803.363525, 26557.397247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28147.562000, 27105.106000, 1198.784034, 1198.784034, 0.000000, X, Y) && !ellipse(27258.362000, 27715.638000, 1195.728034, 1195.728034, 0.000000, X, Y) && !ellipse(25973.236000, 25640.940000, 1022.392029, 1022.392029, 0.000000, X, Y) && !ellipse(28206.292572, 24414.223083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26026.293152, 27349.899597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25547.416138, 25023.884186, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul  4 04:46:35 2012] Writing fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src15.gif
[Wed Jul  4 04:49:27 2012] Mean detx,y = (43.47, -2405.81) 
[Wed Jul  4 04:49:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 04:49:34 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 04:49:34 2012] Setting source spectrum file to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jul  4 04:49:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Jul  4 05:13:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul  4 05:13:53 2012] rmf not generated due to insufficient counts
[Wed Jul  4 05:28:21 2012] Updating aperture counts using extracted products
[Wed Jul  4 05:28:21 2012] Error reading totcts from fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jul  4 05:28:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 05:28:21 2012] Using photon index=1.80, rate=0.00756, arf fullrun_mos2_xmm0201903001_pi300-10000_pass1_cl_src15.arf
[Wed Jul  4 05:28:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 05:28:21 2012] Updating source flux to 8e-14
[Wed Jul  4 05:28:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting