[Tue Jul  3 20:26:59 2012] Detection parameters:
  Position = (318.7, 286.7) = 22 18 40.81 -38 55 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 273.3 +/- 23.1
  Background counts = 54.1
  Rate = 0.01 +/- 0.0009

[Tue Jul  3 20:27:00 2012] Off-axis axis estimate = 1.70'
[Tue Jul  3 21:52:57 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 21:52:57 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jul  3 21:52:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.741
[Tue Jul  3 21:52:57 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.28"
[Tue Jul  3 23:04:56 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jul  3 23:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src7.csv
[Tue Jul  3 23:04:56 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jul  3 23:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src7.csv
[Tue Jul  3 23:04:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jul  3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Jul  3 23:04:57 2012] fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jul  3 23:04:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Jul  3 23:04:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 23:05:12 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 10.182367 pixels away
[Tue Jul  3 23:05:12 2012] Source 14 is offset by 8.272569 and -2.790722 pixels which is larger than
2 X fitted extent = 5.404184 x 5.404184, not incorporating fit results
[Tue Jul  3 23:05:12 2012] Spatial fit model total counts = 1411.900000, observed total counts = 1360.000000
[Tue Jul  3 23:05:12 2012] Offset between fit and detection position for source 14 = 1.759012 pixels
[Tue Jul  3 23:05:12 2012] Warning, changing simple spatial fit ID from 7 to 17
[Tue Jul  3 23:05:12 2012] 1451.531100 total counts/ 1391.180000 bgd. counts: snr = 1.618056
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.759012 pixels
  Position = (317.0, 287.2) = 22 18 41.45 -38 55 20.4
  Extent = 6.5 (2.8-14.0)", rotation angle = 0
  Source counts = 60.4 +/- 38.1
  Background counts = 1391.2
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability