[Tue Jul  3 20:26:40 2012] Detection parameters:
  Position = (200.9, 391.0) = 22 19 24.68 -38 47 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.3 +/- 11.9
  Background counts = 14.1
  Rate = 0.003 +/- 0.0004

[Tue Jul  3 20:26:40 2012] Off-axis axis estimate = 9.75'
[Tue Jul  3 21:10:22 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 21:10:22 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Tue Jul  3 21:10:22 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Tue Jul  3 21:10:22 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 11.30"
[Tue Jul  3 21:52:57 2012] fullrun_mos1_xmm0201903001_pi300-10000_cl_pass0_src26.ximg exists
[Tue Jul  3 21:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903001_pi300-10000_cl_pass0_src26.csv
[Tue Jul  3 21:52:57 2012] fullrun_mos1_xmm0201903001_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Jul  3 21:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201903001_pi300-10000_cl_pass0_src26.csv
[Tue Jul  3 21:52:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201903001_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201903001_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 21:52:57 2012] fullrun_mos1_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Jul  3 21:52:57 2012] fullrun_mos1_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Jul  3 21:52:57 2012] Fit fullrun_mos1_xmm0201903001_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Tue Jul  3 23:05:07 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.278449 pixels away
[Tue Jul  3 23:05:07 2012] Source 5 is offset by 2.589336 and 3.197246 pixels which is larger than
2 X fitted extent = 1.445595 x 1.445595, not incorporating fit results
[Tue Jul  3 23:05:07 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 23:05:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 23:05:07 2012] Assessing source extent using major
[Tue Jul  3 23:05:07 2012] Source does appear to be extended
[Tue Jul  3 23:05:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 23:36:37 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 23:36:37 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Tue Jul  3 23:36:37 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Tue Jul  3 23:36:37 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.30"
[Wed Jul  4 00:11:40 2012] fullrun_mos1_xmm0201903001_pi300-10000_cl_pass1_src20.ximg exists
[Wed Jul  4 00:11:40 2012] fullrun_mos1_xmm0201903001_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Jul  4 00:11:40 2012] Fit fullrun_mos1_xmm0201903001_pi300-10000_cl_pass1_src20 appears to have run properly
[Wed Jul  4 00:11:40 2012] fullrun_mos1_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Jul  4 00:11:40 2012] fullrun_mos1_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Jul  4 00:11:40 2012] Fit fullrun_mos1_xmm0201903001_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Jul  4 01:04:42 2012] Warning, spatial fit 20 centroid is now closest to src. 4
[Wed Jul  4 01:04:42 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 01:04:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 01:04:42 2012] Assessing source extent using major
[Wed Jul  4 01:04:42 2012] Source does appear to be extended
[Wed Jul  4 01:04:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 04:17:10 2012] XMMSAS src. selection expression = ellipse(17427.808197, 33971.144409, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul  4 04:17:10 2012] Writing source region out to fullrun_mos1_xmm0201903001_pi300-10000_pass1_cl_src5_src.reg
[Wed Jul  4 04:17:10 2012] Extracting stamp from image fullrun_mos1_xmm0201903001_pi300-10000_cl_sm2.00.img.gz, (163, 354) - (238, 429)
[Wed Jul  4 04:17:10 2012] XMMSAS bgd. selection expression = annulus(17427.808197, 33971.144409, 1087.500000, 2175.000000, X, Y)
[Wed Jul  4 04:17:10 2012] Writing fullrun_mos1_xmm0201903001_pi300-10000_pass1_cl_src5.gif
[Wed Jul  4 04:22:59 2012] Mean detx,y = (736.64, -12843.53) 
[Wed Jul  4 04:22:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 04:23:10 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 04:23:10 2012] Setting source spectrum file to fullrun_mos1_xmm0201903001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul  4 04:23:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201903001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jul  4 04:39:24 2012] Not generating rmf since there are only 76 counts
[Wed Jul  4 04:39:24 2012] rmf not generated due to insufficient counts
[Wed Jul  4 05:28:21 2012] Updating aperture counts using extracted products
[Wed Jul  4 05:28:21 2012] Error reading totcts from fullrun_mos1_xmm0201903001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul  4 05:28:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 05:28:21 2012] Using photon index=1.80, rate=0.00271, arf fullrun_mos1_xmm0201903001_pi300-10000_pass1_cl_src5.arf
[Wed Jul  4 05:28:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 05:28:21 2012] Updating source flux to 6.3e-14
[Wed Jul  4 05:28:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting