[Mon Feb 20 10:26:14 2012] Detection parameters:
  Position = (191.5, 199.0) = 21 57 51.38 -7 53 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1961.5 +/- 53.5
  Background counts = 22.1
  Rate = 0.2 +/- 0.006

[Mon Feb 20 10:26:14 2012] Off-axis axis estimate = 10.59'
[Mon Feb 20 11:21:12 2012] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 11:21:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 11:21:12 2012] Initial guess for spatial extent in simple fitting = 11.72"
[Mon Feb 20 11:21:12 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.029
[Mon Feb 20 11:21:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.72"
[Mon Feb 20 11:37:39 2012] fullrun_mos2_xmm0201902801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 20 11:37:39 2012] fullrun_mos2_xmm0201902801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 20 11:37:39 2012] Fit fullrun_mos2_xmm0201902801_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Feb 20 11:37:39 2012] fullrun_mos2_xmm0201902801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 20 11:37:39 2012] fullrun_mos2_xmm0201902801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 20 11:37:39 2012] Fit fullrun_mos2_xmm0201902801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 20 11:37:52 2012] Spatial fit model total counts = 1751.000000, observed total counts = 1751.000000
[Mon Feb 20 11:37:52 2012] Offset between fit and detection position for source 1 = 0.157403 pixels
[Mon Feb 20 11:37:52 2012] 1755.956000 total counts/ 503.736000 bgd. counts: snr = 55.792926
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.157403 pixels
  Position = (191.6, 199.1) = 21 57 51.34 -7 53 49.2
  Extent = 6.7 (6.4-7.0)", rotation angle = 0
  Source counts = 1252.2 +/- 41.9
  Background counts = 503.7
  Rate = 0.08 +/- 0.003
[Mon Feb 20 11:37:52 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 11:37:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 11:37:52 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 11:37:52 2012] Source does appear to be extended
[Mon Feb 20 11:37:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 12:25:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 12:25:47 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Mon Feb 20 12:25:47 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.968
[Mon Feb 20 12:25:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.67"
[Mon Feb 20 12:37:19 2012] fullrun_mos2_xmm0201902801_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 20 12:37:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902801_pi300-10000_cl_pass1_src1.csv
[Mon Feb 20 12:37:19 2012] fullrun_mos2_xmm0201902801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 20 12:37:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902801_pi300-10000_cl_pass1_src1.csv
[Mon Feb 20 12:37:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201902801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201902801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 12:37:20 2012] fullrun_mos2_xmm0201902801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 20 12:37:20 2012] fullrun_mos2_xmm0201902801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 20 12:37:20 2012] Fit fullrun_mos2_xmm0201902801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 20 12:37:28 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Mon Feb 20 12:37:28 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 12:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 12:37:28 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 12:37:28 2012] Source does appear to be extended
[Mon Feb 20 12:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 13:19:15 2012] Counts = 1252.220000, rescaling region sizes by 2.000000
[Mon Feb 20 13:19:15 2012] XMMSAS src. selection expression = ellipse(16620.033400, 17269.295600, 799.881623, 799.881623, 0.000000, X, Y)
[Mon Feb 20 13:19:15 2012] Writing source region out to fullrun_mos2_xmm0201902801_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 20 13:19:15 2012] Extracting stamp from image fullrun_mos2_xmm0201902801_pi300-10000_cl_sm2.00.img.gz, (146, 153) - (238, 245)
[Mon Feb 20 13:19:15 2012] XMMSAS bgd. selection expression = annulus(16620.033400, 17269.295600, 2666.272077, 5332.544153, X, Y)
[Mon Feb 20 13:19:15 2012] Writing fullrun_mos2_xmm0201902801_pi300-10000_pass1_cl_src1.gif
[Mon Feb 20 13:19:17 2012] Mean detx,y = (-4621.82, 9653.50) 
[Mon Feb 20 13:19:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 13:20:51 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 13:20:51 2012] Setting source spectrum file to fullrun_mos2_xmm0201902801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 20 13:20:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201902801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 20 13:29:29 2012] Updating aperture counts using extracted products
[Mon Feb 20 13:29:29 2012] Error reading totcts from fullrun_mos2_xmm0201902801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 20 13:29:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 13:29:29 2012] Using photon index=1.80, rate=0.0844, arf fullrun_mos2_xmm0201902801_pi300-10000_pass1_cl_src1.arf
[Mon Feb 20 13:29:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 13:29:29 2012] Updating source flux to 1.5e-12
[Mon Feb 20 13:29:56 2012] Reading fit data from xmm0201902801/analysis//spectral/fullrun_mos2_xmm0201902801_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 20 13:29:56 2012] Spectral fit parameter nH value = 3.25027e+21
[Mon Feb 20 13:29:56 2012] Spectral fit parameter PhoIndex value = 4.4238
[Mon Feb 20 13:29:56 2012] Failed to get F(0.3-8.0) from xmm0201902801/analysis//spectral/fullrun_mos2_xmm0201902801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 20 13:29:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 13:29:56 2012] Using Nh = 3.3e+21, photon index=4.42, rate=0.0844, arf fullrun_mos2_xmm0201902801_pi300-10000_pass1_cl_src1.arf
[Mon Feb 20 13:29:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 13:29:56 2012] Updating source flux to 9.8e-13