[Sat Dec 17 10:17:05 2011] Detection parameters:
  Position = (293.3, 305.2) = 21 49 15.33 -30 42 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.9 +/- 13.7
  Background counts = 20.5
  Rate = 0.003 +/- 0.0006

[Sat Dec 17 10:17:06 2011] Off-axis axis estimate = 0.61'
[Sat Dec 17 12:37:58 2011] Using EEF radius (= 6.74 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 12:37:58 2011] Initial guess for spatial extent in simple fitting = 6.74"
[Sat Dec 17 12:37:58 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.953
[Sat Dec 17 12:37:58 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 6.74"
[Sat Dec 17 14:29:56 2011] fullrun_mos1_xmm0201902601_pi300-10000_cl_pass0_src19.ximg exists
[Sat Dec 17 14:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902601_pi300-10000_cl_pass0_src19.csv
[Sat Dec 17 14:29:56 2011] fullrun_mos1_xmm0201902601_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Dec 17 14:29:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902601_pi300-10000_cl_pass0_src19.csv
[Sat Dec 17 14:29:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201902601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201902601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 14:29:57 2011] fullrun_mos1_xmm0201902601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Dec 17 14:29:57 2011] fullrun_mos1_xmm0201902601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Dec 17 14:29:57 2011] Fit fullrun_mos1_xmm0201902601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Dec 17 16:08:44 2011] Warning, spatial fit 19 centroid is now closest to src. 21
[Sat Dec 17 16:08:44 2011] Source 23 is offset by -7.081276 and 0.235075 pixels which is larger than
2 X fitted extent = 5.112644 x 5.112644, not incorporating fit results
[Sat Dec 17 16:08:44 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 16:08:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 16:08:44 2011] Assessing source extent using major
[Sat Dec 17 16:08:44 2011] Source does appear to be extended
[Sat Dec 17 16:08:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 16:08:44 2011] Source is confused with source 21
[Sat Dec 17 17:33:44 2011] Using EEF radius (= 6.74 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 17:33:44 2011] Initial guess for spatial extent in simple fitting = 6.74"
[Sat Dec 17 17:33:44 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.953
[Sat Dec 17 17:33:44 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 6.74"
[Sat Dec 17 19:18:21 2011] fullrun_mos1_xmm0201902601_pi300-10000_cl_pass1_src18.ximg exists
[Sat Dec 17 19:18:21 2011] fullrun_mos1_xmm0201902601_pi300-10000_cl_pass1_src18_1.ximg exists
[Sat Dec 17 19:18:21 2011] Fit fullrun_mos1_xmm0201902601_pi300-10000_cl_pass1_src18 appears to have run properly
[Sat Dec 17 19:18:21 2011] fullrun_mos1_xmm0201902601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sat Dec 17 19:18:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0201902601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat Dec 17 19:18:21 2011] fullrun_mos1_xmm0201902601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Dec 17 19:18:21 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0201902601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sat Dec 17 19:18:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201902601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201902601_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 20:18:05 2011] Source 23 is offset by 6.516379 and 5.389121 pixels which is larger than
2 X fitted extent = 6.193839 x 6.193839, not incorporating fit results
[Sat Dec 17 20:18:05 2011] Source 23 is offset by -8.034977 and 0.235075 pixels which is larger than
2 X fitted extent = 5.960184 x 5.960184, not incorporating fit results
[Sat Dec 17 20:18:05 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 20:18:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 20:18:05 2011] Assessing source extent using major
[Sat Dec 17 20:18:05 2011] Source does appear to be extended
[Sat Dec 17 20:18:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 06:46:06 2011] XMMSAS src. selection expression = ellipse(25470.561005, 26503.489532, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 18 06:46:06 2011] Writing source region out to fullrun_mos1_xmm0201902601_pi300-10000_pass1_cl_src23_src.reg
[Sun Dec 18 06:46:06 2011] Extracting stamp from image fullrun_mos1_xmm0201902601_pi300-10000_cl_sm2.00.img.gz, (256, 268) - (331, 343)
[Sun Dec 18 06:46:06 2011] XMMSAS bgd. selection expression = annulus(25470.561005, 26503.489532, 1087.500000, 2175.000000, X, Y) && !ellipse(27467.011400, 27070.726800, 1134.032033, 1134.032033, 0.000000, X, Y) && !ellipse(26969.352400, 25539.740400, 476.370414, 476.370414, 0.000000, X, Y) && !ellipse(25627.895386, 27008.991180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26204.950000, 27556.078000, 1176.896034, 1176.896034, 0.000000, X, Y) && !ellipse(28378.672000, 27520.880000, 2566.880074, 2566.880074, 0.000000, X, Y) && !ellipse(25791.819550, 25884.257050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28315.310730, 25264.384705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27297.993774, 29175.104797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29898.198000, 25676.638000, 2534.960073, 2534.960073, 0.000000, X, Y) && !ellipse(27981.692000, 24600.554000, 1161.888033, 1161.888033, 0.000000, X, Y) && !ellipse(26834.404419, 24930.711243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25090.650000, 28736.834000, 1745.176050, 1461.872042, 122.770464, X, Y) && !ellipse(25907.058000, 24333.848000, 1184.264034, 1184.264034, 0.000000, X, Y)
[Sun Dec 18 06:46:06 2011] Writing fullrun_mos1_xmm0201902601_pi300-10000_pass1_cl_src23.gif
[Sun Dec 18 07:01:37 2011] Mean detx,y = (-863.24, -1876.68) 
[Sun Dec 18 07:01:39 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 07:01:51 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 07:01:51 2011] Setting source spectrum file to fullrun_mos1_xmm0201902601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Dec 18 07:01:51 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0201902601_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Dec 18 08:41:16 2011] Not generating rmf since there are only 72 counts
[Sun Dec 18 08:41:16 2011] rmf not generated due to insufficient counts
[Sun Dec 18 13:08:38 2011] Updating aperture counts using extracted products
[Sun Dec 18 13:08:38 2011] Error reading totcts from fullrun_mos1_xmm0201902601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Dec 18 13:08:40 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 13:08:40 2011] Using photon index=1.80, rate=0.00298, arf fullrun_mos1_xmm0201902601_pi300-10000_pass1_cl_src23.arf
[Sun Dec 18 13:08:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 13:08:40 2011] Updating source flux to 3e-14
[Sun Dec 18 13:08:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting