[Mon Aug 13 10:31:00 2012] Detection parameters:
  Position = (285.7, 295.9) = 20 23 0.00 -20 55 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.4 +/- 25.8
  Background counts = 173.3
  Rate = 0.008 +/- 0.001

[Mon Aug 13 10:31:01 2012] Off-axis axis estimate = 0.94'
[Mon Aug 13 10:35:32 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 10:35:32 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Mon Aug 13 10:35:32 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Mon Aug 13 10:35:32 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 6.90"
[Mon Aug 13 11:52:39 2012] fullrun_pn_xmm0201902301_pi300-10000_cl_pass0_src15.ximg exists
[Mon Aug 13 11:52:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201902301_pi300-10000_cl_pass0_src15.csv
[Mon Aug 13 11:52:39 2012] fullrun_pn_xmm0201902301_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Aug 13 11:52:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201902301_pi300-10000_cl_pass0_src15.csv
[Mon Aug 13 11:52:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201902301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201902301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 11:52:40 2012] fullrun_pn_xmm0201902301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Aug 13 11:52:40 2012] fullrun_pn_xmm0201902301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Aug 13 11:52:40 2012] Fit fullrun_pn_xmm0201902301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Aug 13 14:33:08 2012] Warning, spatial fit 15 centroid is now closest to src. 13
[Mon Aug 13 14:33:08 2012] Source 17 is offset by 6.512823 and 0.380825 pixels which is larger than
2 X fitted extent = 1.321991 x 1.321991, not incorporating fit results
[Mon Aug 13 14:33:08 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 14:33:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 14:33:08 2012] Assessing source extent using major
[Mon Aug 13 14:33:08 2012] Source does appear to be extended
[Mon Aug 13 14:33:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 14:33:08 2012] Source is confused with source 15
[Mon Aug 13 14:33:39 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 14:33:39 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Mon Aug 13 14:33:39 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Mon Aug 13 14:33:39 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 6.90"
[Mon Aug 13 15:52:30 2012] fullrun_pn_xmm0201902301_pi300-10000_cl_pass1_src14.ximg exists
[Mon Aug 13 15:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201902301_pi300-10000_cl_pass1_src14.csv
[Mon Aug 13 15:52:30 2012] fullrun_pn_xmm0201902301_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Aug 13 15:52:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201902301_pi300-10000_cl_pass1_src14.csv
[Mon Aug 13 15:52:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201902301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201902301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 15:52:31 2012] fullrun_pn_xmm0201902301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Aug 13 15:52:31 2012] fullrun_pn_xmm0201902301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Aug 13 15:52:31 2012] Fit fullrun_pn_xmm0201902301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Aug 13 18:29:36 2012] Source 17 is offset by -3.176916 and 5.262185 pixels which is larger than
2 X fitted extent = 2.613255 x 2.613255, not incorporating fit results
[Mon Aug 13 18:29:36 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 18:29:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 18:29:36 2012] Assessing source extent using major
[Mon Aug 13 18:29:36 2012] Source does appear to be extended
[Mon Aug 13 18:29:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 18:30:06 2012] XMMSAS src. selection expression = ellipse(24810.454346, 25696.472137, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 13 18:30:06 2012] Writing source region out to fullrun_pn_xmm0201902301_pi300-10000_pass1_cl_src17_src.reg
[Mon Aug 13 18:30:06 2012] Extracting stamp from image fullrun_pn_xmm0201902301_pi300-10000_cl_sm2.00.img.gz, (248, 258) - (323, 333)
[Mon Aug 13 18:30:06 2012] XMMSAS bgd. selection expression = annulus(24810.454346, 25696.472137, 1087.500000, 2175.000000, X, Y) && !ellipse(24477.640000, 24599.640000, 1160.520033, 1160.520033, 0.000000, X, Y) && !ellipse(25092.642000, 24497.816600, 2321.040067, 2321.040067, 0.000000, X, Y) && !ellipse(25273.728020, 26367.850000, 1027.520030, 1027.520030, 0.000000, X, Y) && !ellipse(26026.342000, 25977.824000, 1070.648031, 1070.648031, 0.000000, X, Y) && !ellipse(26660.120331, 25517.119598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23539.218353, 24493.459778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27814.256256, 24120.730835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26791.007965, 24063.196350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25100.744000, 23057.182000, 1230.488035, 1230.488035, 0.000000, X, Y) && !ellipse(24408.076691, 22857.961731, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 13 18:30:06 2012] Writing fullrun_pn_xmm0201902301_pi300-10000_pass1_cl_src17.gif
[Mon Aug 13 18:55:26 2012] Mean detx,y = (-61.82, 934.76) 
[Mon Aug 13 18:55:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 18:55:44 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 18:55:44 2012] Setting source spectrum file to fullrun_pn_xmm0201902301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Aug 13 18:55:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0201902301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Aug 14 09:59:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 14 09:59:34 2012] rmf not generated due to insufficient counts
[Tue Aug 14 12:01:09 2012] Updating aperture counts using extracted products
[Tue Aug 14 12:01:09 2012] Error reading totcts from fullrun_pn_xmm0201902301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Aug 14 12:01:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 12:01:10 2012] Using photon index=1.80, rate=0.00832, arf fullrun_pn_xmm0201902301_pi300-10000_pass1_cl_src17.arf
[Tue Aug 14 12:01:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 12:01:10 2012] Updating source flux to 2e-14
[Tue Aug 14 12:03:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting