[Mon Aug 13 10:31:44 2012] Detection parameters:
  Position = (294.0, 275.3) = 20 22 57.43 -20 57 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.0 +/- 28.4
  Background counts = 87.8
  Rate = 0.007 +/- 0.001

[Mon Aug 13 10:31:45 2012] Off-axis axis estimate = 1.71'
[Mon Aug 13 11:52:40 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 11:52:40 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Aug 13 11:52:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Aug 13 11:52:40 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.28"
[Mon Aug 13 13:23:46 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src4.ximg exists
[Mon Aug 13 13:23:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src4.csv
[Mon Aug 13 13:23:46 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Aug 13 13:23:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src4.csv
[Mon Aug 13 13:23:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 13:23:47 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Aug 13 13:23:47 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Aug 13 13:23:47 2012] Fit fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Aug 13 14:33:16 2012] Warning, spatial fit 4 centroid is now closest to src. 18
[Mon Aug 13 14:33:16 2012] Source 3 is offset by -1.276512 and -4.366705 pixels which is larger than
2 X fitted extent = 0.852703 x 0.852703, not incorporating fit results
[Mon Aug 13 14:33:16 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 14:33:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 14:33:16 2012] Assessing source extent using major
[Mon Aug 13 14:33:16 2012] Source does appear to be extended
[Mon Aug 13 14:33:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 14:33:16 2012] Source is confused with source 2
[Mon Aug 13 15:52:31 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 15:52:31 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Aug 13 15:52:31 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Aug 13 15:52:31 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.28"
[Mon Aug 13 17:36:06 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass1_src4.ximg exists
[Mon Aug 13 17:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902301_pi300-10000_cl_pass1_src4.csv
[Mon Aug 13 17:36:06 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Aug 13 17:36:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902301_pi300-10000_cl_pass1_src4.csv
[Mon Aug 13 17:36:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201902301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201902301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 17:36:07 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Aug 13 17:36:07 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Aug 13 17:36:07 2012] Fit fullrun_mos1_xmm0201902301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Aug 13 18:29:44 2012] Warning, spatial fit 4 centroid is now closest to src. 18
[Mon Aug 13 18:29:44 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 22.991005 pixels away
[Mon Aug 13 18:29:44 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.983505 pixels away
[Mon Aug 13 18:29:44 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 18:29:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 18:29:44 2012] Assessing source extent using major
[Mon Aug 13 18:29:44 2012] Source does appear to be extended
[Mon Aug 13 18:29:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 10:12:34 2012] XMMSAS src. selection expression = ellipse(25531.143463, 23900.068695, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 14 10:12:34 2012] Writing source region out to fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src3_src.reg
[Tue Aug 14 10:12:34 2012] Extracting stamp from image fullrun_mos1_xmm0201902301_pi300-10000_cl_sm2.00.img.gz, (257, 238) - (332, 313)
[Tue Aug 14 10:12:34 2012] XMMSAS bgd. selection expression = annulus(25531.143463, 23900.068695, 1087.500000, 2175.000000, X, Y) && !ellipse(25112.374040, 24593.699400, 2064.456059, 2064.456059, 0.000000, X, Y) && !ellipse(27193.081500, 22097.695200, 260.756808, 260.756808, 0.000000, X, Y) && !ellipse(24734.236000, 24333.671000, 1195.280034, 1195.280034, 0.000000, X, Y) && !ellipse(24673.051270, 25440.150299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26210.536000, 23366.308000, 1175.824034, 1175.824034, 0.000000, X, Y) && !ellipse(26123.037109, 24741.107635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24177.838000, 25194.767200, 1108.080032, 922.288027, 359.995000, X, Y) && !ellipse(25096.862976, 25695.965027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25839.106000, 23474.144000, 1165.352034, 1165.352034, 0.000000, X, Y) && !ellipse(26237.682000, 25801.210000, 1068.368031, 1060.160031, -0.000000, X, Y) && !ellipse(25595.453583, 25768.025177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26550.706573, 24788.003418, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 10:12:34 2012] Writing fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src3.gif
[Tue Aug 14 10:14:37 2012] Mean detx,y = (603.08, -1413.87) 
[Tue Aug 14 10:14:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 10:15:14 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 10:15:14 2012] Setting source spectrum file to fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug 14 10:15:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Aug 14 10:58:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 14 10:58:42 2012] rmf not generated due to insufficient counts
[Tue Aug 14 12:01:11 2012] Updating aperture counts using extracted products
[Tue Aug 14 12:01:11 2012] Error reading totcts from fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug 14 12:01:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 12:01:12 2012] Using photon index=1.80, rate=0.00669, arf fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src3.arf
[Tue Aug 14 12:01:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 12:01:12 2012] Updating source flux to 6.8e-14
[Tue Aug 14 12:01:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting