[Mon Aug 13 10:31:45 2012] Detection parameters:
  Position = (250.9, 250.5) = 20 23 10.81 -20 59 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.4 +/- 15.7
  Background counts = 65.2
  Rate = 0.005 +/- 0.0007

[Mon Aug 13 10:31:45 2012] Off-axis axis estimate = 4.89'
[Mon Aug 13 11:52:40 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 11:52:40 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Mon Aug 13 11:52:40 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.659
[Mon Aug 13 11:52:40 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.88"
[Mon Aug 13 13:23:47 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src9.ximg exists
[Mon Aug 13 13:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src9.csv
[Mon Aug 13 13:23:47 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Aug 13 13:23:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src9.csv
[Mon Aug 13 13:23:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 13:23:47 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Aug 13 13:23:47 2012] fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Aug 13 13:23:47 2012] Fit fullrun_mos1_xmm0201902301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Aug 13 14:33:16 2012] Spatial fit model total counts = 376.269000, observed total counts = 346.000000
[Mon Aug 13 14:33:16 2012] Offset between fit and detection position for source 20 = 0.982241 pixels
[Mon Aug 13 14:33:16 2012] 387.409700 total counts/ 325.086000 bgd. counts: snr = 3.456640
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.982241 pixels
  Position = (251.5, 249.6) = 20 23 10.65 -20 59 18.2
  Extent = 5.1 (3.7-7.9)", rotation angle = 0
  Source counts = 62.3 +/- 19.7
  Background counts = 325.1
  Rate = 0.003 +/- 0.0009
[Mon Aug 13 14:33:16 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 14:33:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 14:33:16 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 14:33:16 2012] Source does appear to be extended
[Mon Aug 13 14:33:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 15:52:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 13 15:52:31 2012] Initial guess for spatial extent in simple fitting = 5.11"
[Mon Aug 13 15:52:31 2012] source mask rpix=1.2, npix_max = 11, mask sum = 5, frac = 0.445
[Mon Aug 13 15:52:31 2012] Skipping simple spatial due to low active detector fraction
[Mon Aug 13 18:29:44 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 18:29:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 18:29:44 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 18:29:44 2012] Source does appear to be extended
[Mon Aug 13 18:29:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 10:12:34 2012] XMMSAS src. selection expression = ellipse(21827.864200, 21670.872600, 306.862209, 306.862209, 0.000000, X, Y)
[Tue Aug 14 10:12:34 2012] Writing source region out to fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src20_src.reg
[Tue Aug 14 10:12:34 2012] Extracting stamp from image fullrun_mos1_xmm0201902301_pi300-10000_cl_sm2.00.img.gz, (234, 232) - (269, 267)
[Tue Aug 14 10:12:34 2012] XMMSAS bgd. selection expression = annulus(21827.864200, 21670.872600, 511.437015, 1022.874029, X, Y)
[Tue Aug 14 10:12:34 2012] Writing fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src20.gif
[Tue Aug 14 10:16:44 2012] Mean detx,y = (3663.41, 1579.37) 
[Tue Aug 14 10:16:46 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 10:17:24 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 10:17:24 2012] Setting source spectrum file to fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Aug 14 10:17:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Aug 14 10:59:36 2012] Not generating rmf since there are only 62 counts
[Tue Aug 14 10:59:36 2012] rmf not generated due to insufficient counts
[Tue Aug 14 12:01:11 2012] Updating aperture counts using extracted products
[Tue Aug 14 12:01:11 2012] Error reading totcts from fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Aug 14 12:01:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 12:01:12 2012] Using photon index=1.80, rate=0.0027, arf fullrun_mos1_xmm0201902301_pi300-10000_pass1_cl_src20.arf
[Tue Aug 14 12:01:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 12:01:12 2012] Updating source flux to 3.4e-14
[Tue Aug 14 12:01:16 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting