[Tue May 29 01:31:45 2012] Detection parameters:
  Position = (150.0, 325.3) = 15 17 18.89 -0 56 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.2 +/- 10.9
  Background counts = 9.4
  Rate = 0.002 +/- 0.0004

[Tue May 29 01:31:46 2012] Off-axis axis estimate = 10.93'
[Tue May 29 04:15:07 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Tue May 29 04:15:07 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Tue May 29 04:15:07 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Tue May 29 04:15:07 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 11.90"
[Tue May 29 05:15:51 2012] fullrun_mos2_xmm0201902101_pi300-10000_cl_pass0_src35.ximg exists
[Tue May 29 05:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902101_pi300-10000_cl_pass0_src35.csv
[Tue May 29 05:15:51 2012] fullrun_mos2_xmm0201902101_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue May 29 05:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902101_pi300-10000_cl_pass0_src35.csv
[Tue May 29 05:15:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201902101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201902101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 05:15:51 2012] fullrun_mos2_xmm0201902101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue May 29 05:15:51 2012] fullrun_mos2_xmm0201902101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue May 29 05:15:51 2012] Fit fullrun_mos2_xmm0201902101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue May 29 05:16:12 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.192783 pixels away
[Tue May 29 05:16:12 2012] Vigneting correction estimate = 1.000000
[Tue May 29 05:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 05:16:12 2012] Assessing source extent using major
[Tue May 29 05:16:12 2012] Source does appear to be extended
[Tue May 29 05:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 07:43:25 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Tue May 29 07:43:25 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Tue May 29 07:43:25 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Tue May 29 07:43:25 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 11.90"
[Tue May 29 08:46:01 2012] fullrun_mos2_xmm0201902101_pi300-10000_cl_pass1_src33.ximg exists
[Tue May 29 08:46:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902101_pi300-10000_cl_pass1_src33.csv
[Tue May 29 08:46:01 2012] fullrun_mos2_xmm0201902101_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue May 29 08:46:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902101_pi300-10000_cl_pass1_src33.csv
[Tue May 29 08:46:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201902101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201902101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 08:46:02 2012] fullrun_mos2_xmm0201902101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue May 29 08:46:02 2012] fullrun_mos2_xmm0201902101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue May 29 08:46:02 2012] Fit fullrun_mos2_xmm0201902101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue May 29 08:46:19 2012] Spatial fit model total counts = 178.791000, observed total counts = 173.000000
[Tue May 29 08:46:19 2012] Offset between fit and detection position for source 5 = 0.110480 pixels
[Tue May 29 08:46:19 2012] 179.848600 total counts/ 135.211000 bgd. counts: snr = 3.838794
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.110480 pixels
  Position = (150.0, 325.4) = 15 17 18.89 -0 56 36.5
  Extent = 4.2 (3.1-5.8)", rotation angle = 0
  Source counts = 44.6 +/- 13.4
  Background counts = 135.2
  Rate = 0.001 +/- 0.0004
[Tue May 29 08:46:19 2012] Vigneting correction estimate = 1.000000
[Tue May 29 08:46:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 08:46:19 2012] Assessing source extent using major axis lower bound
[Tue May 29 08:46:19 2012] Source does appear to be extended
[Tue May 29 08:46:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:36:48 2012] XMMSAS src. selection expression = ellipse(13001.084200, 28258.140800, 253.576807, 253.576807, 0.000000, X, Y)
[Tue May 29 10:36:48 2012] Writing source region out to fullrun_mos2_xmm0201902101_pi300-10000_pass1_cl_src5_src.reg
[Tue May 29 10:36:48 2012] Extracting stamp from image fullrun_mos2_xmm0201902101_pi300-10000_cl_sm2.00.img.gz, (135, 311) - (165, 340)
[Tue May 29 10:36:48 2012] XMMSAS bgd. selection expression = annulus(13001.084200, 28258.140800, 422.628012, 845.256024, X, Y)
[Tue May 29 10:36:48 2012] Writing fullrun_mos2_xmm0201902101_pi300-10000_pass1_cl_src5.gif
[Tue May 29 10:47:07 2012] Mean detx,y = (12873.89, 4384.30) 
[Tue May 29 10:47:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 10:47:15 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 10:47:15 2012] Setting source spectrum file to fullrun_mos2_xmm0201902101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 29 10:47:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201902101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue May 29 11:48:28 2012] Not generating rmf since there are only 44 counts
[Tue May 29 11:48:28 2012] rmf not generated due to insufficient counts
[Tue May 29 11:49:40 2012] Updating aperture counts using extracted products
[Tue May 29 11:49:40 2012] Error reading totcts from fullrun_mos2_xmm0201902101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 29 11:49:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 11:49:41 2012] Using photon index=1.80, rate=0.00148, arf fullrun_mos2_xmm0201902101_pi300-10000_pass1_cl_src5.arf
[Tue May 29 11:49:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 11:49:41 2012] Updating source flux to 6e-14
[Tue May 29 11:50:40 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting