[Fri Jul  6 10:34:34 2012] Detection parameters:
  Position = (315.8, 320.1) = 15 16 15.62 0 5 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 404.6 +/- 26.9
  Background counts = 43.1
  Rate = 0.02 +/- 0.001

[Fri Jul  6 10:34:35 2012] Off-axis axis estimate = 2.02'
[Fri Jul  6 15:11:21 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 15:11:21 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Fri Jul  6 15:11:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.717
[Fri Jul  6 15:11:21 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.44"
[Fri Jul  6 17:10:58 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul  6 17:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src4.csv
[Fri Jul  6 17:10:58 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul  6 17:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src4.csv
[Fri Jul  6 17:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 17:10:59 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul  6 17:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul  6 17:10:59 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul  6 17:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul  6 17:10:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 17:11:30 2012] Warning, spatial fit 4 centroid is now closest to src. 6
[Fri Jul  6 17:11:30 2012] Spatial fit model total counts = 972.139000, observed total counts = 971.000000
[Fri Jul  6 17:11:30 2012] Offset between fit and detection position for source 4 = 3.939873 pixels
[Fri Jul  6 17:11:30 2012] Warning, changing simple spatial fit ID from 4 to 29
[Fri Jul  6 17:11:30 2012] 922.477400 total counts/ 902.344000 bgd. counts: snr = 0.670241
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.939873 pixels
  Position = (319.7, 320.7) = 15 16 14.50 0 5 50.9
  Extent = 8.8 (2.0-15.8)", rotation angle = 0
  Source counts = 20.1 +/- 30.4
  Background counts = 902.3
  Rate = 0.0007 +/- 0.001
  Deleting source due to low Poisson probability