[Fri Jul 6 10:34:34 2012] Detection parameters: Position = (287.6, 317.0) = 15 16 23.82 0 5 36.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 191.0 +/- 20.5 Background counts = 41.6 Rate = 0.007 +/- 0.0008 [Fri Jul 6 10:34:35 2012] Off-axis axis estimate = 1.56' [Fri Jul 6 15:11:21 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting [Fri Jul 6 15:11:21 2012] Initial guess for spatial extent in simple fitting = 7.21" [Fri Jul 6 15:11:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.967 [Fri Jul 6 15:11:21 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.21" [Fri Jul 6 17:10:59 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src12.ximg exists [Fri Jul 6 17:10:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src12.csv [Fri Jul 6 17:10:59 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src12_1.ximg exists [Fri Jul 6 17:10:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src12.csv [Fri Jul 6 17:10:59 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src12_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 6 17:10:59 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src12.ximg exists [Fri Jul 6 17:10:59 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists [Fri Jul 6 17:10:59 2012] Fit fullrun_mos2_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly [Fri Jul 6 17:11:30 2012] Warning, spatial fit 12 centroid is now closest to src. 3 [Fri Jul 6 17:11:30 2012] Source 21 is offset by 1.263653 and 4.493328 pixels which is larger than 2 X fitted extent = 1.332805 x 1.332805, not incorporating fit results [Fri Jul 6 17:11:30 2012] Vigneting correction estimate = 1.000000 [Fri Jul 6 17:11:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jul 6 17:11:30 2012] Assessing source extent using major [Fri Jul 6 17:11:30 2012] Source does appear to be extended [Fri Jul 6 17:11:30 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jul 6 17:11:30 2012] Source is confused with source 3 [Fri Jul 6 19:25:56 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting [Fri Jul 6 19:25:56 2012] Initial guess for spatial extent in simple fitting = 7.21" [Fri Jul 6 19:25:56 2012] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.967 [Fri Jul 6 19:25:56 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.21" [Fri Jul 6 20:47:24 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass1_src10.ximg exists [Fri Jul 6 20:47:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902001_pi300-10000_cl_pass1_src10.csv [Fri Jul 6 20:47:24 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass1_src10_1.ximg exists [Fri Jul 6 20:47:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201902001_pi300-10000_cl_pass1_src10.csv [Fri Jul 6 20:47:24 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0201902001_pi300-10000_cl_pass1_src10_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0201902001_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 6 20:47:24 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Fri Jul 6 20:47:24 2012] fullrun_mos2_xmm0201902001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Fri Jul 6 20:47:24 2012] Fit fullrun_mos2_xmm0201902001_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly [Fri Jul 6 20:47:41 2012] Warning, spatial fit 10 centroid is now closest to src. 3 [Fri Jul 6 20:47:41 2012] Source 21 is offset by 1.170549 and 4.493328 pixels which is larger than 2 X fitted extent = 0.845191 x 0.845191, not incorporating fit results [Fri Jul 6 20:47:41 2012] Source 21 is offset by 1.741836 and 3.950730 pixels which is larger than 2 X fitted extent = 1.322966 x 1.322966, not incorporating fit results [Fri Jul 6 20:47:41 2012] Vigneting correction estimate = 1.000000 [Fri Jul 6 20:47:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jul 6 20:47:41 2012] Assessing source extent using major [Fri Jul 6 20:47:41 2012] Source does appear to be extended [Fri Jul 6 20:47:41 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jul 7 01:19:12 2012] XMMSAS src. selection expression = ellipse(24969.527771, 27531.673523, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jul 7 01:19:12 2012] Writing source region out to fullrun_mos2_xmm0201902001_pi300-10000_pass1_cl_src21_src.reg [Sat Jul 7 01:19:12 2012] Extracting stamp from image fullrun_mos2_xmm0201902001_pi300-10000_cl_sm2.00.img.gz, (250, 280) - (325, 355) [Sat Jul 7 01:19:12 2012] XMMSAS bgd. selection expression = annulus(24969.527771, 27531.673523, 1087.500000, 2175.000000, X, Y) && !ellipse(26953.850000, 29999.170000, 1258.384036, 1258.384036, 254.853000, X, Y) && !ellipse(26663.502838, 27352.559937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27655.430000, 27179.616000, 728.024821, 728.024821, 0.000000, X, Y) && !ellipse(25324.808000, 27943.486000, 1152.560033, 1152.560033, 0.000000, X, Y) && !ellipse(27550.306519, 28739.610962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26947.967987, 29009.492035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26082.787200, 25160.729200, 588.951217, 588.951217, 0.000000, X, Y) && !ellipse(25936.736359, 29858.812012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.778168, 25626.283783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24889.643250, 26670.774963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27015.721680, 29425.397064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25313.475933, 28675.366623, 2516.768072, 1967.039782, 38.324961, X, Y) && !ellipse(24758.437012, 26144.970306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24432.718018, 26486.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25924.284000, 25353.260000, 1096.088032, 1096.088032, 0.000000, X, Y) && !ellipse(26845.536957, 24852.679932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24248.084625, 27608.271118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23806.993988, 27589.484131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24235.690000, 29677.636000, 1258.200036, 1258.200036, 0.000000, X, Y) [Sat Jul 7 01:19:12 2012] Writing fullrun_mos2_xmm0201902001_pi300-10000_pass1_cl_src21.gif [Sat Jul 7 01:21:06 2012] Mean detx,y = (1420.66, 189.92) [Sat Jul 7 01:21:07 2012] Setting backscal keywords in source and bgd. spectrum [Sat Jul 7 01:21:12 2012] Binned source spectrum to 10 counts/bin [Sat Jul 7 01:21:12 2012] Setting source spectrum file to fullrun_mos2_xmm0201902001_pi300-10000_pass1_cl_src21_src_b10.pi.gz [Sat Jul 7 01:21:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201902001_pi300-10000_pass1_cl_src21_bgd.pi.gz [Sat Jul 7 01:48:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jul 7 01:48:05 2012] rmf not generated due to insufficient counts [Sat Jul 7 02:05:00 2012] Updating aperture counts using extracted products [Sat Jul 7 02:05:00 2012] Error reading totcts from fullrun_mos2_xmm0201902001_pi300-10000_pass1_cl_src21_src_b10.pi.gz [Sat Jul 7 02:05:00 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jul 7 02:05:00 2012] Using photon index=1.80, rate=0.00718, arf fullrun_mos2_xmm0201902001_pi300-10000_pass1_cl_src21.arf [Sat Jul 7 02:05:00 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jul 7 02:05:00 2012] Updating source flux to 6.9e-14 [Sat Jul 7 02:06:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting