[Fri Jul  6 10:33:48 2012] Detection parameters:
  Position = (205.8, 371.9) = 15 16 47.53 0 9 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.1 +/- 8.7
  Background counts = 11.2
  Rate = 0.003 +/- 0.0006

[Fri Jul  6 10:33:50 2012] Off-axis axis estimate = 8.57'
[Fri Jul  6 13:30:15 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 13:30:15 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Fri Jul  6 13:30:15 2012] source mask rpix=2.5, npix_max = 35, mask sum = 31, frac = 0.883
[Fri Jul  6 13:30:15 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 10.71"
[Fri Jul  6 15:11:20 2012] fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_src38.ximg exists
[Fri Jul  6 15:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_src38.csv
[Fri Jul  6 15:11:20 2012] fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri Jul  6 15:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_src38.csv
[Fri Jul  6 15:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 15:11:21 2012] fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri Jul  6 15:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src38.csv
[Fri Jul  6 15:11:21 2012] fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Jul  6 15:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src38.csv
[Fri Jul  6 15:11:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201902001_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 17:11:19 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 14.835606 pixels away
[Fri Jul  6 17:11:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 17:11:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 17:11:19 2012] Assessing source extent using major
[Fri Jul  6 17:11:19 2012] Source does appear to be extended
[Fri Jul  6 17:11:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 17:11:19 2012] Deleting source due to low Poisson probability 0.9