[Sun Feb 26 17:29:36 2012] Detection parameters:
  Position = (309.9, 305.2) = 12 36 41.00 -33 55 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 630.4 +/- 34.2
  Background counts = 101.7
  Rate = 0.03 +/- 0.001

[Sun Feb 26 17:29:37 2012] Off-axis axis estimate = 0.97'
[Sun Feb 26 19:37:12 2012] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:37:12 2012] Initial guess for spatial extent in simple fitting = 6.91"
[Sun Feb 26 19:37:12 2012] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.745
[Sun Feb 26 19:37:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.91"
[Sun Feb 26 20:36:14 2012] fullrun_mos2_xmm0201901701_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 26 20:36:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201901701_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 20:36:14 2012] fullrun_mos2_xmm0201901701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 26 20:36:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201901701_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 20:36:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201901701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201901701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 20:36:14 2012] fullrun_mos2_xmm0201901701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 26 20:36:14 2012] fullrun_mos2_xmm0201901701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 26 20:36:14 2012] Fit fullrun_mos2_xmm0201901701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 26 20:36:33 2012] Spatial fit model total counts = 1550.410000, observed total counts = 1547.000000
[Sun Feb 26 20:36:33 2012] Offset between fit and detection position for source 3 = 1.102479 pixels
[Sun Feb 26 20:36:33 2012] 1464.566000 total counts/ 1138.170000 bgd. counts: snr = 9.674784
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.102479 pixels
  Position = (310.1, 306.3) = 12 36 40.93 -33 55 18.6
  Extent = 13.6 (13.1-13.8)", rotation angle = 0
  Source counts = 326.4 +/- 38.3
  Background counts = 1138.2
  Rate = 0.02 +/- 0.003
[Sun Feb 26 20:36:33 2012] Spatial fit model total counts = 929.461000, observed total counts = 925.000000
[Sun Feb 26 20:36:33 2012] Offset between fit and detection position for source 3 = 0.400209 pixels
[Sun Feb 26 20:36:33 2012] Warning, changing simple spatial fit ID from 1 to 4
[Sun Feb 26 20:36:33 2012] 866.604000 total counts/ 725.386000 bgd. counts: snr = 5.243309
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.400209 pixels
  Position = (310.3, 306.7) = 12 36 40.85 -33 55 17.1
  Extent = 14.5 (14.2-29.0)" x 7.4 (4.1-13.1)", rotation angle = 90
  Source counts = 141.2 +/- 29.4
  Background counts = 725.4
  Rate = 0.01 +/- 0.002
[Sun Feb 26 20:36:33 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 20:36:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 20:36:33 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 20:36:33 2012] Source does appear to be extended
[Sun Feb 26 20:36:33 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Sun Feb 26 20:36:33 2012] Source is confused with source 1
[Sun Feb 26 20:36:33 2012] Source is confused with source 2
[Sun Feb 26 20:36:33 2012] Source is confused with source 9
[Sun Feb 26 20:36:33 2012] Source is confused with source 10
[Sun Feb 26 22:36:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 22:36:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 22:36:09 2012] Initial guess for spatial extent in simple fitting = 10.96"
[Sun Feb 26 22:36:09 2012] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.905
[Sun Feb 26 22:36:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.96"
[Sun Feb 26 23:27:32 2012] fullrun_mos2_xmm0201901701_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 26 23:27:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201901701_pi300-10000_cl_pass1_src1.csv
[Sun Feb 26 23:27:32 2012] fullrun_mos2_xmm0201901701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 26 23:27:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201901701_pi300-10000_cl_pass1_src1.csv
[Sun Feb 26 23:27:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201901701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201901701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 23:27:32 2012] fullrun_mos2_xmm0201901701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 26 23:27:32 2012] fullrun_mos2_xmm0201901701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 26 23:27:32 2012] Fit fullrun_mos2_xmm0201901701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 26 23:27:50 2012] Warning, spatial fit 1 centroid is now closest to src. 9
[Sun Feb 26 23:27:50 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 23:27:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 23:27:50 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 23:27:50 2012] Source does appear to be extended
[Sun Feb 26 23:27:50 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Mon Feb 27 01:39:20 2012] XMMSAS src. selection expression = ellipse(26950.312000, 26630.872000, 871.236025, 444.010813, 90.000000, X, Y)
[Mon Feb 27 01:39:20 2012] Writing source region out to fullrun_mos2_xmm0201901701_pi300-10000_pass1_cl_src3_src.reg
[Mon Feb 27 01:39:20 2012] Extracting stamp from image fullrun_mos2_xmm0201901701_pi300-10000_cl_sm2.00.img.gz, (260, 257) - (360, 357)
[Mon Feb 27 01:39:20 2012] XMMSAS bgd. selection expression = annulus(26950.312000, 26630.872000, 1452.060042, 2904.120084, X, Y) && !ellipse(27097.246586, 26351.482000, 1112.280032, 766.611222, 52.319000, X, Y) && !ellipse(26347.802000, 26028.003600, 1036.656030, 1036.656030, 0.000000, X, Y) && !ellipse(27779.616000, 27468.496000, 1136.520033, 1136.520033, 0.000000, X, Y) && !ellipse(27124.389374, 27562.386902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25897.351654, 25795.565796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27816.818359, 26685.738708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28357.000000, 25637.626068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26737.222382, 24522.585449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24952.023163, 25952.573608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24431.863098, 25941.056091, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 01:39:20 2012] Writing fullrun_mos2_xmm0201901701_pi300-10000_pass1_cl_src3.gif
[Mon Feb 27 01:39:24 2012] Mean detx,y = (-7.15, -1639.91) 
[Mon Feb 27 01:39:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 01:39:44 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 01:39:45 2012] Setting source spectrum file to fullrun_mos2_xmm0201901701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 27 01:39:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0201901701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Feb 27 02:08:46 2012] Updating aperture counts using extracted products
[Mon Feb 27 02:08:46 2012] Error reading totcts from fullrun_mos2_xmm0201901701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Feb 27 02:08:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 02:08:47 2012] Using photon index=1.80, rate=0.0104, arf fullrun_mos2_xmm0201901701_pi300-10000_pass1_cl_src3.arf
[Mon Feb 27 02:08:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 02:08:47 2012] Updating source flux to 1.2e-13
[Mon Feb 27 02:09:28 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Mon Feb 27 02:10:06 2012] Reading fit data from xmm0201901701/analysis//spectral/fullrun_mos2_xmm0201901701_pi300-10000_pass1_cl_src3_pl.csv
[Mon Feb 27 02:10:06 2012] Spectral fit parameter nH value = 2.15293e+21
[Mon Feb 27 02:10:06 2012] Spectral fit parameter PhoIndex value = 2.53976
[Mon Feb 27 02:10:06 2012] Failed to get F(0.3-8.0) from xmm0201901701/analysis//spectral/fullrun_mos2_xmm0201901701_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Feb 27 02:10:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 02:10:06 2012] Using Nh = 2.2e+21, photon index=2.54, rate=0.0104, arf fullrun_mos2_xmm0201901701_pi300-10000_pass1_cl_src3.arf
[Mon Feb 27 02:10:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 02:10:06 2012] Updating source flux to 1e-13