[Wed May 1 06:16:08 2013] Detection parameters: Position = (297.3, 334.0) = 9 58 24.45 -11 2 48.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 143.6 +/- 19.6 Background counts = 72.4 Rate = 0.02 +/- 0.003 [Wed May 1 06:16:08 2013] Off-axis axis estimate = 2.58' [Wed May 1 06:17:05 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting [Wed May 1 06:17:05 2013] Initial guess for spatial extent in simple fitting = 7.72" [Wed May 1 06:17:05 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.967 [Wed May 1 06:17:05 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 7.72" [Wed May 1 06:59:57 2013] fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_src14.ximg exists [Wed May 1 06:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_src14.csv [Wed May 1 06:59:57 2013] fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_src14_1.ximg exists [Wed May 1 06:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_src14.csv [Wed May 1 06:59:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 06:59:57 2013] fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists [Wed May 1 06:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_tfrozen_src14.csv [Wed May 1 06:59:57 2013] fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists [Wed May 1 06:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_tfrozen_src14.csv [Wed May 1 06:59:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201901401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 07:46:40 2013] Spatial fit model total counts = 469.619000, observed total counts = 336.000000 [Wed May 1 07:46:40 2013] Poor agreement between spatial fit and data for source 14 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 1 07:46:40 2013] Vigneting correction estimate = 1.000000 [Wed May 1 07:46:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 07:46:40 2013] Assessing source extent using major [Wed May 1 07:46:40 2013] Source does appear to be extended [Wed May 1 07:46:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 07:46:40 2013] Source is confused with source 4 [Wed May 1 07:46:50 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting [Wed May 1 07:46:50 2013] Initial guess for spatial extent in simple fitting = 7.72" [Wed May 1 07:46:50 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.967 [Wed May 1 07:46:50 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.72" [Wed May 1 08:24:55 2013] fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_src12.ximg exists [Wed May 1 08:24:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_src12.csv [Wed May 1 08:24:55 2013] fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_src12_1.ximg exists [Wed May 1 08:24:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_src12.csv [Wed May 1 08:24:55 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 08:24:55 2013] fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Wed May 1 08:24:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_tfrozen_src12.csv [Wed May 1 08:24:55 2013] fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Wed May 1 08:24:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_tfrozen_src12.csv [Wed May 1 08:24:55 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0201901401_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 09:17:29 2013] Source 14 is offset by 7.386892 and -6.387947 pixels which is larger than 2 X fitted extent = 4.093756 x 0.887163, not incorporating fit results [Wed May 1 09:17:29 2013] Vigneting correction estimate = 1.000000 [Wed May 1 09:17:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 09:17:29 2013] Assessing source extent using major [Wed May 1 09:17:29 2013] Source does appear to be extended [Wed May 1 09:17:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 09:17:38 2013] XMMSAS src. selection expression = ellipse(25817.825562, 29009.356628, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 1 09:17:38 2013] Writing source region out to fullrun_pn_xmm0201901401_pi300-10000_pass1_cl_src14_src.reg [Wed May 1 09:17:38 2013] Extracting stamp from image fullrun_pn_xmm0201901401_pi300-10000_cl_sm2.00.img.gz, (260, 296) - (335, 371) [Wed May 1 09:17:38 2013] XMMSAS bgd. selection expression = annulus(25817.825562, 29009.356628, 1087.500000, 2175.000000, X, Y) && !ellipse(26504.176920, 27560.644200, 1147.944033, 938.664027, 109.280306, X, Y) && !ellipse(27035.281281, 29412.753815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26272.151520, 29130.633057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26342.270844, 29736.298340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28137.596344, 29629.027191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27659.598145, 29488.419495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.198181, 28880.388580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28711.634918, 28423.869568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.369293, 27814.580170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24854.745544, 27103.908478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24422.825378, 26419.420685, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 1 09:17:38 2013] Writing fullrun_pn_xmm0201901401_pi300-10000_pass1_cl_src14.gif [Wed May 1 09:23:56 2013] Mean detx,y = (-278.77, -1512.80) [Wed May 1 09:23:57 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 09:24:06 2013] Binned source spectrum to 10 counts/bin [Wed May 1 09:24:07 2013] Setting source spectrum file to fullrun_pn_xmm0201901401_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Wed May 1 09:24:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201901401_pi300-10000_pass1_cl_src14_bgd.pi.gz [Wed May 1 09:48:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 1 09:48:05 2013] rmf not generated due to insufficient counts [Wed May 1 10:31:42 2013] Updating aperture counts using extracted products [Wed May 1 10:31:42 2013] Total counts from fullrun_pn_xmm0201901401_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 235.00 [Wed May 1 10:31:42 2013] Total counts from fullrun_pn_xmm0201901401_pi300-10000_pass1_cl_src14_bgd.pi.gz = 421.00 [Wed May 1 10:31:42 2013] Got source and background scale factors 1103616.000000, 3199194.000000 [Wed May 1 10:31:42 2013] User source parameters: Position = (297.3, 334.0) = 9 58 24.45 -11 2 48.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 89.8 +/- 16.4 Background aperture counts = 145.2 Rate = 0.04 +/- 0.007 [Wed May 1 10:31:42 2013] Updating counts from extracted products [Wed May 1 10:31:42 2013] Set source signif. to 89.77/12.05 = 7.45 [Wed May 1 10:31:44 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 10:31:44 2013] Using photon index=1.80, rate=0.0375, arf fullrun_pn_xmm0201901401_pi300-10000_pass1_cl_src14.arf [Wed May 1 10:31:44 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 10:31:44 2013] Updating source flux to 1.1e-13 [Wed May 1 10:31:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 10:31:55 2013] xmm0201901401/analysis//spectral/fullrun_pn_xmm0201901401_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete