[Mon Jun 24 15:25:25 2013] Detection parameters:
  Position = (294.7, 256.4) = 6 5 53.67 -35 19 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 538.9 +/- 32.4
  Background counts = 136.4
  Rate = 0.04 +/- 0.002

[Mon Jun 24 15:25:25 2013] Off-axis axis estimate = 3.06'
[Mon Jun 24 15:27:09 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 15:27:09 2013] Initial guess for spatial extent in simple fitting = 7.96"
[Mon Jun 24 15:27:09 2013] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.105
[Mon Jun 24 15:27:09 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 7.96"
[Mon Jun 24 16:19:53 2013] fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_src26.ximg exists
[Mon Jun 24 16:19:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_src26.csv
[Mon Jun 24 16:19:53 2013] fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Jun 24 16:19:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_src26.csv
[Mon Jun 24 16:19:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 16:19:54 2013] fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Jun 24 16:19:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 24 16:19:54 2013] fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jun 24 16:19:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 24 16:19:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201901001_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 17:31:03 2013] Source 29 is offset by 3.379070 and -7.968581 pixels which is larger than
2 X fitted extent = 6.617747 x 2.224202, not incorporating fit results
[Mon Jun 24 17:31:03 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 17:31:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 17:31:03 2013] Assessing source extent using major
[Mon Jun 24 17:31:03 2013] Source does appear to be extended
[Mon Jun 24 17:31:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 17:31:14 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 17:31:14 2013] Initial guess for spatial extent in simple fitting = 7.96"
[Mon Jun 24 17:31:14 2013] source mask rpix=1.8, npix_max = 21, mask sum = 24, frac = 1.105
[Mon Jun 24 17:31:14 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.96"
[Mon Jun 24 18:04:03 2013] fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun 24 18:04:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_src17.csv
[Mon Jun 24 18:04:03 2013] fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun 24 18:04:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_src17.csv
[Mon Jun 24 18:04:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 18:04:03 2013] fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun 24 18:04:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon Jun 24 18:04:03 2013] fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun 24 18:04:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon Jun 24 18:04:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 19:08:25 2013] Source 29 is offset by 3.492794 and -7.968581 pixels which is larger than
2 X fitted extent = 6.043816 x 2.072377, not incorporating fit results
[Mon Jun 24 19:08:25 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 19:08:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 19:08:25 2013] Assessing source extent using major
[Mon Jun 24 19:08:25 2013] Source does appear to be extended
[Mon Jun 24 19:08:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 19:08:35 2013] XMMSAS src. selection expression = ellipse(25589.177094, 22254.051422, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 19:08:35 2013] Writing source region out to fullrun_pn_xmm0201901001_pi300-10000_pass1_cl_src29_src.reg
[Mon Jun 24 19:08:35 2013] Extracting stamp from image fullrun_pn_xmm0201901001_pi300-10000_cl_sm2.00.img.gz, (257, 219) - (332, 294)
[Mon Jun 24 19:08:35 2013] XMMSAS bgd. selection expression = annulus(25589.177094, 22254.051422, 1087.500000, 2175.000000, X, Y) && !ellipse(25497.230200, 23737.319000, 2933.496084, 2660.736077, 356.162130, X, Y) && !ellipse(27748.005310, 25278.650177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22933.282257, 23451.936920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26916.171356, 23004.134369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26328.342560, 22730.403503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.104548, 22000.231200, 436.627213, 436.627213, 0.000000, X, Y) && !ellipse(26912.788849, 22580.248322, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 24 19:08:35 2013] Writing fullrun_pn_xmm0201901001_pi300-10000_pass1_cl_src29.gif
[Mon Jun 24 19:27:16 2013] Mean detx,y = (1146.11, -1484.35) 
[Mon Jun 24 19:27:19 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 19:27:37 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 19:27:38 2013] Setting source spectrum file to fullrun_pn_xmm0201901001_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jun 24 19:27:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201901001_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Jun 24 19:50:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 24 19:50:09 2013] rmf not generated due to insufficient counts
[Mon Jun 24 21:07:12 2013] Updating aperture counts using extracted products
[Mon Jun 24 21:07:12 2013] Total counts from fullrun_pn_xmm0201901001_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 1677.00
[Mon Jun 24 21:07:12 2013] Total counts from fullrun_pn_xmm0201901001_pi300-10000_pass1_cl_src29_bgd.pi.gz = 1426.00
[Mon Jun 24 21:07:12 2013] Got source and background scale factors 912371.000000, 2979025.000000
[Mon Jun 24 21:07:12 2013] User source parameters:
  Position = (294.7, 256.4) = 6 5 53.67 -35 19 15.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1240.3 +/- 42.0
  Background aperture counts = 436.7
  Rate = 0.07 +/- 0.002

[Mon Jun 24 21:07:12 2013] Updating counts from extracted products
[Mon Jun 24 21:07:12 2013] Set source signif. to 1240.27/20.90 = 59.35
[Mon Jun 24 21:07:13 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 21:07:13 2013] Using photon index=1.80, rate=0.0712, arf fullrun_pn_xmm0201901001_pi300-10000_pass1_cl_src29.arf
[Mon Jun 24 21:07:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 21:07:13 2013] Updating source flux to 2.1e-13
[Mon Jun 24 21:07:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 24 21:07:25 2013] xmm0201901001/analysis//spectral/fullrun_pn_xmm0201901001_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete