[Mon Jun 24 15:25:49 2013] Detection parameters:
  Position = (269.3, 265.1) = 6 6 2.68 -35 18 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.9 +/- 16.3
  Background counts = 55.1
  Rate = 0.002 +/- 0.0004

[Mon Jun 24 15:25:49 2013] Off-axis axis estimate = 3.21'
[Mon Jun 24 16:19:54 2013] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 16:19:54 2013] Initial guess for spatial extent in simple fitting = 8.03"
[Mon Jun 24 16:19:54 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Mon Jun 24 16:19:54 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.03"
[Mon Jun 24 17:30:56 2013] fullrun_mos1_xmm0201901001_pi300-10000_cl_pass0_src19.ximg exists
[Mon Jun 24 17:30:56 2013] fullrun_mos1_xmm0201901001_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Jun 24 17:30:56 2013] Fit fullrun_mos1_xmm0201901001_pi300-10000_cl_pass0_src19 appears to have run properly
[Mon Jun 24 17:30:57 2013] fullrun_mos1_xmm0201901001_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Jun 24 17:30:57 2013] fullrun_mos1_xmm0201901001_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Jun 24 17:30:57 2013] Fit fullrun_mos1_xmm0201901001_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Jun 24 17:31:09 2013] Source 20 is offset by -5.742725 and -3.422260 pixels which is larger than
2 X fitted extent = 2.739582 x 0.951536, not incorporating fit results
[Mon Jun 24 17:31:09 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 17:31:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 17:31:09 2013] Assessing source extent using major
[Mon Jun 24 17:31:09 2013] Source does appear to be extended
[Mon Jun 24 17:31:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 18:04:03 2013] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 18:04:03 2013] Initial guess for spatial extent in simple fitting = 8.03"
[Mon Jun 24 18:04:03 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Mon Jun 24 18:04:03 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.03"
[Mon Jun 24 19:08:20 2013] fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun 24 19:08:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_src17.csv
[Mon Jun 24 19:08:20 2013] fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun 24 19:08:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_src17.csv
[Mon Jun 24 19:08:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 19:08:21 2013] fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun 24 19:08:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon Jun 24 19:08:21 2013] fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun 24 19:08:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon Jun 24 19:08:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201901001_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 19:08:30 2013] Spatial fit model total counts = 796.085000, observed total counts = 1136.000000
[Mon Jun 24 19:08:30 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 19:08:30 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 21.632064 pixels away
[Mon Jun 24 19:08:30 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 19:08:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 19:08:30 2013] Assessing source extent using major
[Mon Jun 24 19:08:30 2013] Source does appear to be extended
[Mon Jun 24 19:08:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 19:55:31 2013] XMMSAS src. selection expression = ellipse(23383.192902, 23016.687347, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 19:55:31 2013] Writing source region out to fullrun_mos1_xmm0201901001_pi300-10000_pass1_cl_src20_src.reg
[Mon Jun 24 19:55:31 2013] Extracting stamp from image fullrun_mos1_xmm0201901001_pi300-10000_cl_sm2.00.img.gz, (232, 228) - (307, 303)
[Mon Jun 24 19:55:31 2013] XMMSAS bgd. selection expression = annulus(23383.192902, 23016.687347, 1087.500000, 2175.000000, X, Y) && !ellipse(25478.495200, 23727.536000, 3625.392104, 3248.328093, 352.285450, X, Y) && !ellipse(26982.022000, 23556.764000, 2373.064068, 2373.064068, 0.000000, X, Y) && !ellipse(25523.223511, 21597.248947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24849.442000, 22345.666000, 1291.384037, 1291.384037, 0.000000, X, Y)
[Mon Jun 24 19:55:31 2013] Writing fullrun_mos1_xmm0201901001_pi300-10000_pass1_cl_src20.gif
[Mon Jun 24 20:09:43 2013] Mean detx,y = (-191.25, 2223.54) 
[Mon Jun 24 20:09:44 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 20:09:53 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 20:09:54 2013] Setting source spectrum file to fullrun_mos1_xmm0201901001_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Jun 24 20:09:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0201901001_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Jun 24 20:56:31 2013] Not generating rmf since there are only 84 counts
[Mon Jun 24 20:56:31 2013] rmf not generated due to insufficient counts
[Mon Jun 24 21:07:16 2013] Updating aperture counts using extracted products
[Mon Jun 24 21:07:16 2013] Total counts from fullrun_mos1_xmm0201901001_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 843.00
[Mon Jun 24 21:07:17 2013] Total counts from fullrun_mos1_xmm0201901001_pi300-10000_pass1_cl_src20_bgd.pi.gz = 608.00
[Mon Jun 24 21:07:17 2013] Got source and background scale factors 1337600.000000, 2811244.000000
[Mon Jun 24 21:07:17 2013] User source parameters:
  Position = (269.3, 265.1) = 6 6 2.68 -35 18 44.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 553.7 +/- 30.0
  Background aperture counts = 289.3
  Rate = 0.01 +/- 0.0007

[Mon Jun 24 21:07:17 2013] Updating counts from extracted products
[Mon Jun 24 21:07:17 2013] Set source signif. to 553.71/17.01 = 32.56
[Mon Jun 24 21:07:17 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 21:07:17 2013] Using photon index=1.80, rate=0.0131, arf fullrun_mos1_xmm0201901001_pi300-10000_pass1_cl_src20.arf
[Mon Jun 24 21:07:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 21:07:17 2013] Updating source flux to 1.3e-13
[Mon Jun 24 21:07:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 24 21:07:23 2013] xmm0201901001/analysis//spectral/fullrun_mos1_xmm0201901001_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete