[Thu Jun  7 10:23:01 2012] Detection parameters:
  Position = (279.5, 343.7) = 3 45 56.94 -41 10 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.7 +/- 14.8
  Background counts = 46.7
  Rate = 0.004 +/- 0.0006

[Thu Jun  7 10:23:02 2012] Off-axis axis estimate = 3.56'
[Thu Jun  7 14:29:30 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 14:29:30 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Thu Jun  7 14:29:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.097
[Thu Jun  7 14:29:30 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.21"
[Thu Jun  7 16:43:59 2012] fullrun_mos2_xmm0201900801_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jun  7 16:43:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900801_pi300-10000_cl_pass0_src23.csv
[Thu Jun  7 16:43:59 2012] fullrun_mos2_xmm0201900801_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jun  7 16:43:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0201900801_pi300-10000_cl_pass0_src23.csv
[Thu Jun  7 16:43:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0201900801_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0201900801_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 16:44:00 2012] fullrun_mos2_xmm0201900801_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jun  7 16:44:00 2012] fullrun_mos2_xmm0201900801_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jun  7 16:44:00 2012] Fit fullrun_mos2_xmm0201900801_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Jun  7 16:44:27 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.926544 pixels away
[Thu Jun  7 16:44:27 2012] Spatial fit model total counts = 773.096000, observed total counts = 765.000000
[Thu Jun  7 16:44:27 2012] Offset between fit and detection position for source 21 = 0.417102 pixels
[Thu Jun  7 16:44:27 2012] Warning, changing simple spatial fit ID from 23 to 24
[Thu Jun  7 16:44:27 2012] 777.675900 total counts/ 748.223000 bgd. counts: snr = 1.076744
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.417102 pixels
  Position = (279.1, 343.6) = 3 45 57.08 -41 10 44.1
  Extent = 3.6 (2.0-7.4)", rotation angle = 0
  Source counts = 29.5 +/- 27.9
  Background counts = 748.2
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability