[Thu Jun  7 10:22:11 2012] Detection parameters:
  Position = (307.1, 322.9) = 3 45 46.32 -41 12 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3953.4 +/- 77.6
  Background counts = 49.9
  Rate = 0.2 +/- 0.003

[Thu Jun  7 10:22:13 2012] Off-axis axis estimate = 1.88'
[Thu Jun  7 12:56:23 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 12:56:23 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Thu Jun  7 12:56:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.831
[Thu Jun  7 12:56:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.37"
[Thu Jun  7 14:29:29 2012] fullrun_mos1_xmm0201900801_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  7 14:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201900801_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 14:29:29 2012] fullrun_mos1_xmm0201900801_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  7 14:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201900801_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 14:29:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201900801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201900801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 14:29:30 2012] fullrun_mos1_xmm0201900801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  7 14:29:30 2012] fullrun_mos1_xmm0201900801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  7 14:29:30 2012] Fit fullrun_mos1_xmm0201900801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun  7 16:44:19 2012] Spatial fit model total counts = 6599.230000, observed total counts = 6600.000000
[Thu Jun  7 16:44:19 2012] Offset between fit and detection position for source 2 = 0.400984 pixels
[Thu Jun  7 16:44:19 2012] 6575.900000 total counts/ 3467.420000 bgd. counts: snr = 52.789172
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.400984 pixels
  Position = (306.7, 323.0) = 3 45 46.47 -41 12 13.7
  Extent = 9.4 (9.0-9.9)", rotation angle = 0
  Source counts = 3108.5 +/- 81.1
  Background counts = 3467.4
  Rate = 0.1 +/- 0.003
[Thu Jun  7 16:44:19 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 16:44:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 16:44:19 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 16:44:19 2012] Source does appear to be extended
[Thu Jun  7 16:44:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 16:44:19 2012] Source is confused with source 10
[Thu Jun  7 18:16:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  7 18:16:59 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Thu Jun  7 18:16:59 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.051
[Thu Jun  7 18:16:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.44"
[Thu Jun  7 19:48:03 2012] fullrun_mos1_xmm0201900801_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  7 19:48:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201900801_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 19:48:03 2012] fullrun_mos1_xmm0201900801_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  7 19:48:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0201900801_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 19:48:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0201900801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0201900801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 19:48:03 2012] fullrun_mos1_xmm0201900801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  7 19:48:03 2012] fullrun_mos1_xmm0201900801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  7 19:48:03 2012] Fit fullrun_mos1_xmm0201900801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun  7 21:11:37 2012] Spatial fit model total counts = 7332.260000, observed total counts = 7328.000000
[Thu Jun  7 21:11:37 2012] Offset between fit and detection position for source 2 = 0.049893 pixels
[Thu Jun  7 21:11:37 2012] 7324.450000 total counts/ 4069.130000 bgd. counts: snr = 51.032037
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.049893 pixels
  Position = (306.6, 323.0) = 3 45 46.49 -41 12 13.7
  Extent = 9.8 (9.3-10.0)", rotation angle = 0
  Source counts = 3255.3 +/- 85.6
  Background counts = 4069.1
  Rate = 0.1 +/- 0.003
[Thu Jun  7 21:11:37 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 21:11:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 21:11:37 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 21:11:37 2012] Source does appear to be extended
[Thu Jun  7 21:11:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 23:03:32 2012] Counts = 3255.320000, rescaling region sizes by 2.000000
[Thu Jun  7 23:03:32 2012] XMMSAS src. selection expression = ellipse(26626.460600, 28049.775600, 1171.011634, 1171.011634, 0.000000, X, Y)
[Thu Jun  7 23:03:32 2012] Writing source region out to fullrun_mos1_xmm0201900801_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun  7 23:03:32 2012] Extracting stamp from image fullrun_mos1_xmm0201900801_pi300-10000_cl_sm2.00.img.gz, (239, 256) - (374, 390)
[Thu Jun  7 23:03:32 2012] XMMSAS bgd. selection expression = annulus(26626.460600, 28049.775600, 3903.372112, 7806.744225, X, Y) && !ellipse(30279.304000, 26481.994400, 292.474408, 292.474408, 0.000000, X, Y) && !ellipse(27769.752000, 26812.178000, 1184.464034, 1184.464034, 0.000000, X, Y) && !ellipse(24303.712120, 29889.314000, 348.992512, 348.992512, 0.000000, X, Y) && !ellipse(26860.675934, 29641.277496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21403.895111, 27877.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25106.925537, 28742.204926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26421.948273, 26401.982452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28583.349213, 27710.513641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.049591, 26755.380127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18539.059800, 19728.511200, 613.354418, 391.035211, 39.214134, X, Y) && !ellipse(26526.936096, 29570.013855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25815.717468, 29532.832825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28163.496155, 29176.007507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27253.500793, 25906.981445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25757.590912, 26006.186615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26653.387177, 25717.784058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28230.506439, 26245.622467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24353.515839, 27537.002167, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  7 23:03:32 2012] Writing fullrun_mos1_xmm0201900801_pi300-10000_pass1_cl_src2.gif
[Thu Jun  7 23:03:37 2012] Mean detx,y = (561.84, -334.06) 
[Thu Jun  7 23:03:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 23:06:22 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 23:06:22 2012] Setting source spectrum file to fullrun_mos1_xmm0201900801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun  7 23:06:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0201900801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun  8 00:38:27 2012] Updating aperture counts using extracted products
[Fri Jun  8 00:38:27 2012] Error reading totcts from fullrun_mos1_xmm0201900801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  8 00:38:28 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 00:38:28 2012] Using photon index=1.80, rate=0.128, arf fullrun_mos1_xmm0201900801_pi300-10000_pass1_cl_src2.arf
[Fri Jun  8 00:38:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 00:38:28 2012] Updating source flux to 1.1e-12
[Fri Jun  8 00:38:32 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Jun  8 00:39:40 2012] Reading fit data from xmm0201900801/analysis//spectral/fullrun_mos1_xmm0201900801_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jun  8 00:39:40 2012] Spectral fit parameter nH value = 1.95388e+21
[Fri Jun  8 00:39:40 2012] Spectral fit parameter PhoIndex value = 2.84617
[Fri Jun  8 00:39:40 2012] Failed to get F(0.3-8.0) from xmm0201900801/analysis//spectral/fullrun_mos1_xmm0201900801_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jun  8 00:39:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  8 00:39:40 2012] Using Nh = 2e+21, photon index=2.85, rate=0.128, arf fullrun_mos1_xmm0201900801_pi300-10000_pass1_cl_src2.arf
[Fri Jun  8 00:39:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  8 00:39:40 2012] Updating source flux to 9e-13