[Sun Jul 14 20:42:51 2013] Detection parameters:
  Position = (346.5, 307.1) = 2 11 15.41 -40 17 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.8 +/- 15.9
  Background counts = 43.8
  Rate = 0.007 +/- 0.0008

[Sun Jul 14 20:42:52 2013] Off-axis axis estimate = 3.54'
[Sun Jul 14 20:43:16 2013] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 20:43:16 2013] Initial guess for spatial extent in simple fitting = 8.20"
[Sun Jul 14 20:43:16 2013] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.747
[Sun Jul 14 20:43:16 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.20"
[Sun Jul 14 20:43:17 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src33.ximg exists
[Sun Jul 14 20:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src33.csv
[Sun Jul 14 20:43:17 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Jul 14 20:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src33.csv
[Sun Jul 14 20:43:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:43:18 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Jul 14 20:43:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun Jul 14 20:43:18 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Jul 14 20:43:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun Jul 14 20:43:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201900601_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:43:31 2013] Source 33 is offset by 2.965432 and -1.555354 pixels which is larger than
2 X fitted extent = 1.077706 x 1.077706, not incorporating fit results
[Sun Jul 14 20:43:31 2013] Warning, spatial fit 33 centroid is now closest to src. 28
[Sun Jul 14 20:43:31 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 20:43:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 20:43:31 2013] Assessing source extent using major
[Sun Jul 14 20:43:31 2013] Source does appear to be extended
[Sun Jul 14 20:43:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 20:43:53 2013] Using EEF radius (= 8.20 ")to estimate initial spatial extent for simple fitting
[Sun Jul 14 20:43:53 2013] Initial guess for spatial extent in simple fitting = 8.20"
[Sun Jul 14 20:43:53 2013] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.747
[Sun Jul 14 20:43:53 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 8.20"
[Sun Jul 14 20:43:54 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jul 14 20:43:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src25.csv
[Sun Jul 14 20:43:54 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jul 14 20:43:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src25.csv
[Sun Jul 14 20:43:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:43:55 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jul 14 20:43:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Jul 14 20:43:55 2013] fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jul 14 20:43:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sun Jul 14 20:43:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0201900601_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 14 20:44:06 2013] Warning, spatial fit 25 centroid is now closest to src. 28
[Sun Jul 14 20:44:06 2013] Vigneting correction estimate = 1.000000
[Sun Jul 14 20:44:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 14 20:44:06 2013] Assessing source extent using major
[Sun Jul 14 20:44:06 2013] Source does appear to be extended
[Sun Jul 14 20:44:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 14 20:44:26 2013] XMMSAS src. selection expression = ellipse(30095.640625, 26665.016205, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 14 20:44:26 2013] Not overwriting source region fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src33_src.reg
[Sun Jul 14 20:44:26 2013] Extracting stamp from image fullrun_pn_xmm0201900601_pi300-10000_cl_sm2.00.img.gz, (309, 270) - (384, 345)
[Sun Jul 14 20:44:26 2013] XMMSAS bgd. selection expression = annulus(30095.640625, 26665.016205, 1087.500000, 2175.000000, X, Y) && !ellipse(27945.675800, 26340.790400, 1168.592034, 1168.592034, 0.000000, X, Y) && !ellipse(28759.821045, 29140.828369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.806976, 28395.888214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27381.199738, 28436.836731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29984.517029, 28540.088165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28139.999146, 27986.517212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28584.851959, 27675.769928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32858.795990, 27268.576050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29382.728088, 27126.409851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30129.662170, 25517.528473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27102.546448, 25364.967834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27449.832245, 24402.177216, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 14 20:44:26 2013] Writing fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src33.gif
[Sun Jul 14 20:47:38 2013] Mean detx,y = (1913.81, -1533.41) 
[Sun Jul 14 20:47:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 14 20:47:56 2013] Binned source spectrum to 10 counts/bin
[Sun Jul 14 20:47:57 2013] Setting source spectrum file to fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jul 14 20:47:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Jul 14 22:53:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 14 22:53:27 2013] rmf not generated due to insufficient counts
[Sun Jul 14 23:03:36 2013] Updating aperture counts using extracted products
[Sun Jul 14 23:03:36 2013] Total counts from fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 608.00
[Sun Jul 14 23:03:36 2013] Total counts from fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src33_bgd.pi.gz = 1321.00
[Sun Jul 14 23:03:36 2013] Got source and background scale factors 1095828.000000, 3980602.000000
[Sun Jul 14 23:03:36 2013] User source parameters:
  Position = (346.5, 307.1) = 2 11 15.41 -40 17 18.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 244.3 +/- 25.7
  Background aperture counts = 363.7
  Rate = 0.01 +/- 0.001

[Sun Jul 14 23:03:36 2013] Updating counts from extracted products
[Sun Jul 14 23:03:36 2013] Set source signif. to 244.34/19.07 = 12.81
[Sun Jul 14 23:03:39 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jul 14 23:03:39 2013] Using photon index=1.80, rate=0.00971, arf fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src33.arf
[Sun Jul 14 23:03:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 14 23:03:39 2013] Updating source flux to 2.6e-14
[Sun Jul 14 23:03:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 14 23:03:59 2013] xmm0201900601/analysis//spectral/fullrun_pn_xmm0201900601_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete